3M™ Wiremount Socket
.100″ × .200″ for .050″ Pitch Cable
3000 Series
01
/2
5/
2
01
1
• Available in 20, 26, 34, 40 and 50 position
• Keying pinless shroud provides polarization
• Keying plug 3497-1 allows keying without pin
loss
• Positive locking metal ‘‘J'' clip provides high
cover retention
• Optional strain relief and pull tab
• Retainer clips add up to 20 pounds pin retention
for the pin shroud
• Pin shroud corner stopsensure proper pin height
for mating socket
• Optional polarizing key 3518 provides
polarization of socket connectors
• RoHS* compliant
Date Modified:January 25, 2011
Physical
Insulation
TS-0097-B
Sheet 1 of 4
E
IN
U
UL 94V-0
Gray
D
Material: Glass Filled Polyester (PBT)
Flammability:
Color:
Contact
Material:
J-Clip Material:
Plating:
Underplating and U-Slot:
Wiping Area:
Wire Accommodation:
Copper Alloy
Stainless Steel
O
Electrical
N
T
100 μ″ [ 2.54 μm ] Nickel
30 μ″ [ 0.76 μm ] Gold
26 and 28 AWG Stranded
Marking: 3M Logo, Part Identification Number, and Orientation Triangle
D
IS
C
Current Rating: 1 A
Insulation Resistance: > 1 × 109Ω at 500 VDC
Withstanding Voltage: 1000 VRMS at Sea Level
Environmental
Temperature Rating:
-55°C to +105°C
*"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury,
hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by
3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
.100″ × .200″ for .050″ Pitch Cable
3000 Series
Contact
Quantity
Dimensions
A
B
C Ref
20
3575-0000
3448-30
1.18
[ 30.0 ]
1.06
[ 26.9 ]
1.0
[ 25 ]
4
26
3501-0000
3448-28
1.48
[ 37.6 ]
1.36
[ 34.5 ]
1.3
[ 33 ]
6
34
3310-0000
3448-29
1.88
[ 47.8 ]
1.76
[ 44.7 ]
1.7
[ 43 ]
8
40
3318-0000
3448-27
2.18
[ 55.4 ]
2.06
[ 52.3 ]
2.0
[ 51 ]
9
50
3307-0000
3448-17
2.68
[ 68.1 ]
2.56
[ 65.0 ]
2.5
[ 64 ]
12
Optional Strain Relief 3M Part No. 3448-XX
.620 ± .025
[ 15.75 ]
A
D
.0 0
± .0 1 ± .0 0 5
.0 0 0
[ ] Dim e n s io n s fo r R e fe re n c e
O n ly
.17
[ 4.3 ]
.16
[ 4.1 ]
.075 ± .010
[ 1.91 ]
IN
U
3497-1
Optional Keying Plug
3M Part No. 3497-1
2X .08
[ 2.03 ]
T
.100 Typ
[ 2.54 ]
See Note 1 and Table
.200 Typ
[ 5.08 ]
D
IS
C
.150
[ 3.81 ]
Pos 2
.0
± .1
.26
[ 6.60 ]
Triangle Indicates
Position No. 1
A
O
.04
[ 1.0 ]
.15
[ 3.8 ]
Material: Gray Polyester (PBT)
.200
[ 5.08 ]
N
.100
[ 2.54 ]
in c h
E
B
.050 Typ
[ 1.27 ]
Pos 1
[m m ]
T o le ra n c e Un le s s No te d
Material:
Nickel Plated Steel Music
Wire, ∅ .043 [ 1.09 ]
Non-Conductive Transfer
Adhesive with Liner
.050 Typ
[ 1.27 ]
See Note 2
In c h
01
/2
.34
[ 8.6 ]
5/
2
Material:
Gray Extruded
Polyvinyl Chloride
NO. XXXX
Keying Slots
Provided
Strain Relief
01
1
C
3M Part Number
Socket
See Note 2
.34 Ref
[ 8.64 ]
Notes:
1. These holes accept 3M Keying Plug 3497-1 for
keying the socket connector without pin loss.
2. Guide holes for Pinless Shroud.
3. Order Pinless Shroud separately.
Ordering Information
Sockets
XXXX-0000
Socket Series: See Table for 3M Part Number
Assembly tools: 3M™Press 3640 (or equivalent), 3M™Locator Plate 3443-94, 3M™Platen 3442-9.
3
Interconnect Solutions
http://www.3M.com/interconnects/
Strain Relief
3448-XX
3M Part Number:
See Table
TS-0097-B
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
.100″ × .200″ Shroud For Keying Wiremount Socket
3000 Series
Retainer Clip - 3M Part No. 3619
.16 Ref
[ 4.1 ]
.09
[ 2.3 ]
Pinless Shroud
Position No. 2
B
.200
[ 5.08 ]
See Note 2
.19 Ref
[ 4.8 ]
Material: .010 [0.25] Stainless Steel
C
5/
2
A
See Note 3
01
1
A
.100 Typ
[ 2.54 ]
.100
[ 2.54 ]
Position No. 1
Material: Gray Polyester (PBT)
.04
[ 1.0 ]
A
See Note 6
01
/2
See Note 4
See Note 5
and Table
.29
[ 7.4 ]
Dimension A
20
3670
1.18
[ 30.0 ]
26
3556
1.48
[ 37.6 ]
34
3321
1.88
[ 47.8 ]
40
3396
2.18
[ 55.4 ]
50
3404
2.68
[ 68.1 ]
Keying Bumps
Provided
Optional
Polarizing Key
3M Part No. 3518
IN
U
3M Part
Number
Section
A-A
4
Breakaway Tab
6
8
3518
9
T
Contact
Quantity
A
E
Triangle Indicates
Position No. 1
.237
[ 6.02 ]
(See Note 7)
D
.400
[ 10.16 ]
See Note 1
O
N
12
.15
[ 3.8 ]
D
IS
C
Notes:
1. Accepts .025 ± .001 [ 0.64 ] Square Post.
2. Notches will accomodate 3M Polarizing Key 3518.
3. Provides Keying without pin loss.
4. Retainer Clips (3M Part No. 3619) snaps on the two opposing corners for retention to pins.
5. Two corner pins act as stand-offs to control pin length for mating socket.
.34 Ref
[ 8.6 ]
.09
[ 2.3 ]
.02
[ 0.5 ]
Material: Gray Polyester (PBT)
Ordering Information
Pinless Shroud
XXXX
3M Part Number:
See Table
3
Interconnect Solutions
http://www.3M.com/interconnects/
Retainer Clip
3619
Polarizing Keys
3518
TS-0097-B
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Wiremount Socket
3000 Series
01
1
.100″ × .200″ for .050″ Recommended Board Pin Pattern
.025 ± .001
[0.64] Square or Round Typ
(See Note 1)
Space Occupied by Socket
.025
A B
.100
[2.54]
01
/2
.200
[5.08]
5/
2
-B-
.20 Min
[5.1]
-A-
.40 Min
[10.2]
Space for Cable Exit
IN
U
E
D
.30 Min
[7.6]
.15
[3.8]
.018 Max
[ 0.46 ]
.170 Min
[ 4.32 ]
.04 (See Note 3)
[ 1.02 ]
D
IS
C
O
N
T
See Note 2
Notes:
1. Measured at tip.
2. Tapered Pin Tip configuration recommended.
3. Pinless Shroud base thickness; When the Header Retainer Clip is used, the
minimum overall pin length is .36″ [9.14 ].
TS-0097-B
Sheet 4 of 4
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
01
1
5/
2
01
/2
D
E
IN
U
T
N
O
C
Important Notice
D
IS
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics
Minimum 10%
Post-Consumer Fiber
Printed in USA.
© 3M 2007
很抱歉,暂时无法提供与“3396”相匹配的价格&库存,您可以联系我们找货
免费人工找货