3397-1240

.100″
.100″ Wiremount Socket .050″ Pitch Cable (Optional Plastic or Metal Strain Relief) 3000 Series
Industry standard IDC socket
Optional plastic or low profile metal strain relief
Positive locking metal ‘‘J’’ clips provide high cover retention
Mates with 3M headers, plugs and pin strips for quick connect/disconnect capability
Open or closed end covers available
Accepts flat cable or discrete wire
Military polarization, with or without centerbump Date Modified: July 30, 2001 TS-0718-05 Sheet 1 of 2 112 Physical Insulation Material: Flammability: Color: Contact Material: Plating Underplate & U-Slot: Wiping Area: Wire Accommodation: Marking: Glass Filled Polyester (PBT) UL 94V-0 Gray Copper Alloy 100 µ″ [ 2.54 µm ] Nickel — QQ-N-290, Class 2 30 µ″ [ 0.76 µm ] Gold — MIL-G-45204, Type II, Grade C 26 & 28 AWG Solid or Stranded 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 1 A Insulation Resistance: > 1 × 109 Ω at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: –55°C to +105°C UL File No.: UL File No.: E68080 3M Interconnect Solutions Division http://www.3M.com/interconnects/ 325 For technical, sales or ordering information call 800-225-5373 .100″
.100″ Wiremount Socket .050″ Pitch Cable (Optional Plastic or Metal Strain Relief) A .24 [ 6.1 ] NO.3XXX Recessed for Cable Exit See Note 2 B .15 [ 3.8 ] .050 Typ* [ 1.27 ] Optional Closed End Cover Nonconductive Transfer Adhesive with Liner .14 [ 3.6 ] Socket Series 10 3473 0.68 [ 17.3 ] 0.54 [ 13.7 ] 14 3385 0.88 [ 22.4 ] 0.74 [ 18.8 ] 16 3452 0.98 [ 24.9 ] 0.84 [ 21.3 ] 20 3421 1.18 [ 30.0 ] 1.04 [ 26.4 ] 24 3626 1.38 [ 35.1 ] 1.24 [ 31.5 ] 26 3399 1.48 [ 37.6 ] 1.34 [ 34.0 ] 30 3419 1.68 [ 42.7 ] 1.54 [ 39.1 ] 34 3414 1.88 [ 47.7 ] 1.74 [ 44.2 ] 36 9436 1.98 [ 50.3 ] 1.84 [ 46.7 ] 40 3417 2.18 [ 55.4 ] 2.04 [ 51.8 ] 44 9444 2.38 [ 60.5 ] 2.24 [ 56.9 ] 50 3425 2.68 [ 68.1 ] 2.54 [ 64.5 ] 60 3334 3.18 [ 80.8 ] 3.04 [ 77.2 ] Assembled Height with Metal Profile Strain Relief Military: Dual Polarization Slots  .41 Ref [ 10.4 ] .06 [ 1.5 ] Centerbump (Optional) .035 [ 0.89 ] B .54 Ref [ 13.7 ] .26 [ 6.6 ] Position 1 Dimensions A Contact Quantity .050 Ref [ 1.27 ] See Note 1 Triangle Indicates Position 1 3000 Series  Assembled Height without Strain Relief .14 [ 3.6 ] .24 [ 6.1 ] .100 [ 2.54 ] .100 Typ [ 2.54 ] .565 Ref [ 14.35 ] .64 Ref [ 16.3 ] Position 2 A Notes: 1. This polarizing groove is non-existent on 3385 and 3473 Series. 2. The optional high cable-profile cover for cable thicker than .040 [ 1.02 ] (does not have cable exit recess). 3. The low profile strain relief can be used with the 4600 Series Plug and .1 x .1 Headers with ejector latches. The latches will only function as an ejector. 4. See TS-0721 for mating post pattern. Ordering Information Sockets XXXX-XXXX Socket Series: See Table for 3M Part Number Polarization: 0 = Military (Dual Slot) 6 = Centerbump and Military Cover: 6 = Open End (For Daisy Chaining or Bussing) 7 = Closed End (For End Cable Termination) 8 = Open End for Higher Profile Cables (60 Pos Only) 9 = Closed End for Higher Profile Cables (60 Pos Only) Assembled Height with Plastic Strain Relief Type: 2 = Low Profile (Metal) 3 = Plastic [mm] Tolerance Unless Noted Inch .0 .00 ± .1 ± .01 ± .005 .000 [ ] Dimensions for Reference only Strain Relief (Order Separately) 3448-X0XX Strain Relief: 00 = No Strain Relief XX = “Contact Quantity” for Plastic Strain Relief (i.e. 50 for a 50 Position Strain Relief) Inch Keying Plug (Order Separately) 3435-0 XX = ‘‘Contact Quantity’’ See Table (i.e. 50 for a 50 Position Strain Relief) See TS-0720 Pull Tabs (Order Separately) 3490-X TS-0718-05 Sheet 2 of 2 3M Interconnect Solutions Division http://www.3M.com/interconnects/ 326 For technical, sales or ordering information call 800-225-5373