356

3M™ Power Clamp Header 3 mm, Right Angle, 1 and 2 Row, 5 and 10 Contacts • • • • • • • • • 356 Series Accepts one or two Power Clamp Wiremount Sockets Accepts Branch and Terminator Connectors End to end stackable at 25.4 mm pitch on PCB Integrated press fit board retention pins retain the connector to the board during wave soldering CC-Link Communication Interconnect Standard One Touch latching mechanism maintains a reliable interconnection in demanding field applications Keyed to prevent reverse insertion of Sockets Polarization options ensures proper interconnection of mated connectors RoHS Compliant. See the Regulatory Information Appendix (RIA) in the "RoHS compliance" section of www.3M.com/Interconnects for compliance information (RIA E1 & C1 apply). TS-2303-B Sheet 1 of 3 Date Modified: December 20, 2009 Physical Insulation: Body Material: PBT Flammability: UL 94V-0 Body Color: Black Contact: Material: Copper Alloy Plating: Underplating: 2.5 µm Ni minimum Wiping Area: 0.5 µm Au minimum Solder Tails: Au Flash Mating Compatability: 355, 357, and 35T series products (with same polarization) Electrical Current Rating: 18 AWG: 10A (1 contact/socket); 7A (2 - 5 contacts/socket) 20 AWG: 9A (1 contact/socket); 6A (2 - 5 contacts/socket) Rating Conditions: 30° C maximum temperature rise Voltage Rating: 250 V Insulation Resistance: 103 MΩ min. at 600 VDC Withstanding Voltage: 1,000 VRMS for 1 minute Environmental Process Rating: 260°C maximum for wave solder process Temperature Rating: -20°C to +75°C ambient UL Rating: 65° C UL File No: E68080 390°C for 3 seconds maximum for soldering iron 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Power Clamp Header 3 mm, Right Angle, 1 and 2 Row, 5 and 10 Contacts 356 Series C 1 Row Header Available Part Numbers 3M Part Numbers 35605-5153-A00 PE 35605-5153-AP0 PE 35605-5153-B00 PE 35605-5153-BP0 PE Polarization A A B B Standoff 0.5 mm 1.7 mm 0.5 mm 1.7 mm Recommended Hole Pattern Polarization Options PCB PCB mm [Inch] Tolerance Unless Noted .0 mm ±3 .00 ±.13 .000 ±.008 [ ] Dimensions for Reference Only Ordering Information 35605-5153-XX0 PE Polarization: A: Type A (wide) B: Type B (narrow) (RIA E1 and C1 Apply) Height of Stand-off 0: 0.5 mm - Standard P: 1.7 mm TS-2303-B Sheet 2 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Power Clamp Header 3 mm, Right Angle, 1 and 2 Row, 5 and 10 Contacts 356 Series 2 Row Header Available Part Numbers 3M Part Numbers 35610-5253-A00 PE 35610-5253-B00 PE Polarization A B Recommended Hole Pattern Polarization Options PCB PCB mm [Inch] Tolerance Unless Noted .0 mm ±3 .00 ±.13 .000 ±.008 [ ] Dimensions for Reference Only Ordering Information 35610-5253-X00 PE Polarization: A: Type A (wide) B: Type B (narrow) (RIA E1 and C1 Apply) TS-2303-B Sheet 3 of 3 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.