3580-1000

3M™ Wiremount Socket .125″ × .125″ Discrete Wire Version, 50 Position Backplane Connector 25 / 20 1 1 • Special holes secure shroud to back panel pins • Optional keying strip 3439-5650 allows keying without pin loss • Header side walls provide polarization • Optional 3505-5 latch provides socket retention • RoHS* compliant 01 / Date Modified: January  Physical TS-0099-B Sheet 1 of 3 Insulation E UL 94V-0 Gray D Material: Glass Filled Polyester (PBT) Copper Alloy IN U Flammability: Color: Contact Material: Cover Retention Clip Material: Plating: Underplating and U-Slot: Wiping Area: Wire Accommodation: Stainless Steel C O Electrical N T 100 μ″ [ 2.54 μm ] Nickel 30 μ″ [ 0.76 μm ] Gold 26 and 28 AWG Solid or Stranded Marking: 3M Logo, Part Identification Number, and Orientation Triangle Current Rating: 1 A Insulation Resistance: > 1 × 109Ω at 500 VDC D IS Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: -55°C to +105°C "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Wiremount Socket .125″ × .125″ Discrete Wire Version, 50 Position Backplane Connector .19 [4.8] Break-Out for Typical 26 and 28 AWG Discrete Round Jacketed Cable, 3X .05 [1.3] 1 3X .30 Ref [7.6] 20 1 3497-3 Break-Away Tab 3X .50 Ref [12.7] .45 Ref [11.4] 25 / #2 X 3/8" LG Thread Forming Screw (Zinc Plated Steel) both sides Material: Gray Polyester (PBT) .73 [18.5] 01 / 3485-1900 2.53 [64.3] 3.12 [79.2] E D Optional Junction Shell 3M Part No. 3485-1900 Material: Gray Polyester (PBT) .25 [6.4] .30 [7.6] .25 [6.4] IN U 3.12 [79.2] Optional Keying Plug 3M Part No. 3497-3 3580 .48 [12.2] C O N T .050 Ref [1.27] .125 Typ [3.18] 3580 In c h [m m ] T o le ra n c e U n le s s N o te d 3.12 [79.2] in c h .125 [3.18] D IS Position 1 .0 .0 0 ± .1 ± .0 1 ± .0 0 5 .0 0 0 [ ] D im e n s io n s fo r R e fe re n c e O n ly 50 Position 2 Ordering Information Junction Shell 3485-1900 3M Interconnect Solutions http://www.3M.com/interconnects/ Socket 3580-1000 Keying Plug 3497-3 TS-0099-B Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Wiremount Socket .125″ × .125″ Discrete Wire Version, 50 Position Backplane Connector Optional Latch 3M Part No. 3505-5 .20 [5.1] Optional Keying Strip 3M Part No. 3439-5650 .14 [3.6] 1.12 [28.4] .19 Ref [4.8] .05 Ref [1.3] .11 [2.8] 1 .62 [15.7] Identification .100 [2.54] .22 [5.6] 20 1 .250 Ref [6.35] .25 [6.4] 25 / 3579 .31 [7.9] 3.12 [79.2] .025 A B 01 / E (See Note 2) D .025 ± .001 [0.64] Square or Round Typ Space Occupied by Socket and Junction Shell .45 Min [11.4] .125 [3.18] .06 [1.5] -A- .0 0 ± .0 1 ± .0 0 5 .0 0 0 [ ] D im e n sio n s fo r R e fe re n c e O n ly .018 Max [0.46] (See Note 3) .130 Min [3.30] .325 Min [8.26] .125 [3.18] .0 ± .1 .011 [2.79] (See Note 4) -B- C O N T IN U .125 Min [3.18] in c h .125 [3.18] .125 [3.18] [m m ] T o le ra n c e Un le s s N o te d .11 [2.8] Accepts .025 ± .001 Sq Post [0.64] In c h D IS Notes: 1.Material: Gray Glass Filled Polyester. UL Flammability Rating UL94V-O. 2.Measured at the tip. 3.Tapered Pin Tip configuration recommended. 4.Pinless Header base thickness Ordering Information Pinless Shroud 3579-0XX0 Latch Options: 0 = without Latch 1 = with Latch Keying Strip Options: 0 = without Keying Strips 5 = with 2 Keying Strips 3M Interconnect Solutions http://www.3M.com/interconnects/ Keying Strip 3439-5650 Latch 3505-5 TS-0099-B Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 1 20 1 25 / 01 / D E IN U T N C O Important Notice D IS All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. © 3M 2007