3750-TAN-72MMX50M

3M™ Hot Melt Adhesive Systems Fast setting adhesives. Applied for speed and durability. 2 3M™ Hot Melt Adhesives Systems Application Success with 3M™ Hot Melt Adhesives 3M™ Hot Melt Adhesives offer many benefits for success with a variety of assembly and/or closure applications. Open time or bonding range is the maximum time between applying adhesive and joining the surfaces. With 3M™ Hot Melt Adhesives you have wide latitude in bonding range selection to meet your process needs. Spee da nd Fl Ea y i lit b i ex Move assemblies immediately and eliminate clamps, fixturing and drying time and energy. Each adhesive is engineered for efficient application with an easy-to-use 3M portable applicator. Minimal operator training. Du Bo n ds Variety of Surfaces Impro Appe ve s a r a nc e e rabl se 3M™ Hot Melt Adhesives are applied as a molten liquid, so they quickly fill gaps and wet the entire bonding surfaces. As a result, they often exceed 100 psi shear strength, quickly giving your application fast, convenient strength. Select from many options to fit your specific application — including peel resistant or highly heat resistant options. 3M™ Hot Melt Adhesives Features and Benefits Unlike mechanical fasteners and sealing tapes, hot melt adhesive is virtually invisible between the mating surfaces. Since hot melts are dispensed as liquids, it is easy to apply exactly where adhesive is needed. You can combine a wide variety of materials ranging from wood to corrugated cardboard, heat-sensitive foam and even plastics and metals. For heat sensitive materials, low melt adhesives are dispensed at lower temperatures. 3M™ Hot Melt Adhesives Systems 3 3M™ Hot Melt Adhesives Selector Guide Step 1: Select your assembly type Small Joint Assembly Small joints are typically irregularly shaped, but only a few inches of overlap area. Large Surface Lamination Two surfaces of similar size, either rigid or flexible, are bonded or laminated together where majority of the surface is covered by adhesive. Mounting and Trim Attachment Small objects are mounted or added to a large surface. Sealing, Potting and Encapsulating Adhesive flows over and around a component or fills a chamber to protect and seal components therein. Lead Adhesive Substrate Step 2: After selecting your assembly, choose the substrate and identify the adhesive that performs best for your application. Wood Paper Plastic Metal / Glass Fabric / Foam 3M™ Hot Melt Adhesive 3792 3M™ Hot Melt Adhesive 3762LM 3M™ Hot Melt Adhesive 3764 3M™ Hot Melt Adhesive 3747 3M™ Sprayable Hot Melt Adhesive 6111HT Hot Melt Adhesive is dispensed at 350–385°F. Low Melt Adhesive is dispensed at 250–270°F. NOTE: Low Melt (LM) adhesives liquefy at lower operating temperatures for bonding heat sensitive surfaces such as bead board and foams. NOTE: High Temperature (HT) has high temperature resistance. 4 3M™ Hot Melt Adhesives Systems Lead Markets and Applications Furniture and Woodworking Common Assembly: Small Joint Assembly, Large Surface Lamination, Mounting and Trim Attachment • Great product performance for various small joint, mounting and trim attachment, and large surface lamination assemblies in furniture, upholstery, cabinetry and more. • Bonds well to wood, particleboard, MDF, laminate, foam, and fabric. Nearly instant bonding strength speeds up production — eliminating the need for clamping and mechanical fasteners. • Low melt adhesives are available for lower operating temperatures and bonding heat sensitive surfaces. Lead Adhesives 3792 Multi-purpose for wood, fabric and many other substrates with a long open time 3792LM Multi-purpose low melt for heat sensitive surfaces Transportation and Electrical Common Assembly: Large Surface Lamination, Sealing, Potting and Encapsulating • Fast, durable product performance for various small joint, mounting and trim attachment, large surface lamination and potting assemblies for automotive interior and electrical component manufacturing. • Bonds well to foams, fabrics, non-wovens and difficult surfaces, such as LSE plastics. • Some products are available as sprayable hot melt. All products can be tested to meet your specification requirements. Lead Adhesives 3748 Bonds to plastic with high peel performance; Good thermal shock resistance and non-corrosive to copper; 3748VO is self extinguishing 6111HT Sprayable hot melt with long open time; High temperature resistant 3M™ Hot Melt Adhesives Systems 5 Packaging and Corrugated Carton Sealing Common Assembly: Small Joint Assembly •Q  uickly bonds and seals any size of corrugated carton invisibly. Durably bonds coated, printed and waxed surface that may be difficult to seal with tape. •L  ow melt adhesives are available for lower operating temperatures and bonding heat sensitive surfaces. Lead Adhesives 3762 Fast-setting with “hot tack” 3762LM General purpose, fast setting with “hot tack” Product Assembly Common Assembly: Small Joint Assembly, Large Surface Lamination, Mounting and Trim Attachment • Fast, durable product performance for small joint, mounting and trim attachment, large surface lamination and more. • Many solutions are available to quickly assemble and attach materials for your design. • Low melt adhesives are available for lower operating temperatures and bonding heat sensitive surfaces. Lead Adhesives 3764 Bonds to all plastics, including low surface energy (LSE), flexible at low temp 3792LM Multi-purpose low melt for heat sensitive surfaces Point-of-Purchase, Displays and Trade Exhibits Common Assembly: Small Joint Assembly, Large Surface Lamination, Mounting and Trim Attachment • Fast, durable product performance for small joint, mounting and trim attachment, large surface lamination and more. • Bonds well to wood, foam, fabric, and plastics. • Low melt adhesives are available for worker-friendly temperatures and bonding heat-sensitive surfaces. Lead Adhesives 3762LM General purpose, fast setting with “hot tack” 3792LM Multi-purpose low melt for heat sensitive surfaces 6 3M™ Hot Melt Adhesives Systems 3M™ Hot Melt Adhesives Hot Melt Technology: Applied 350–385°F (177–196°C) Lead Product Low Melt Technology: Applied 250–270°F (121–132°C) Product/ Cat # Lead Product Lead Product Bulk Only Lead Product Sizes Stock Number UPC Number Case Qty Billing Unit Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard and wood. Economical, general purpose. Use with low melt applicator only. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3720-9132-2 62-3720-9830-1 62-3720-9330-2 62-3720-9531-5 0-00-021200-49125-2 0-00-021200-49134-4 0-00-021200-49128-3 0-00-51115-25579-3 11 11 22 11 LBS Bonds variety of plastics, woods and light-gauge metals. Use with low melt applicator only. 5/8" x 8" Q 1" x 3" PG 62-3733-9132-5 62-3733-9330-5 0-00-021200-89499-2 0-00-021200-89501-2 11 22 LBS Clear Clear, multi-purpose for wood, coated paper, polyolefins and other heat-sensitive materials. P.O.P. displays. Use with low melt applicator only. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3760-9132-8 62-3760-9830-7 62-3760-9330-8 62-3760-9531-1 0-00-021200-82454-8 0-00-021200-82456-2 0-00-021200-83491-2 0-00-051115-25580-9 11 11 22 11 LBS Light Yellow Removable “gummy glue” for many substrates. Removes easily without residual tack. Use with low melt applicator only. 5/8" x 2" TC 62-3798-9830-7 0-00-021200-41604-0 11 LBS Color Features/Application Ideas 3762LM* Light Amber 3776LM Tan 3792LM* 3798LM* 3731* Tan High heat resistance. Bonds plastics including polyethylene, polypropylene. 5/8" x 8" Q 1" x 3" PG 62-3731-9132-9 62-3731-9330-9 0-00-021200-45271-0 0-00-021200-49139-9 11 22 LBS 3738* Tan High delivery rate and long bonding range. General purpose for foundry sand cores, wood bonding, corrugated, selected plastics and chipboard. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3738-9132-4 62-3738-9830-3 62-3738-9330-4 62-3738-9531-7 0-00-021200-65262-2 0-00-021200-82610-8 0-00-021200-82609-2 0-00-021200-82594-1 11 11 22 11 LBS 3747 Tan General purpose for wide variety of plastics, wood and lightweight metals. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3747-9132-5 62-3747-9830-4 62-3747-9330-5 62-3747-9531-8 0-00-021200-82561-3 0-00-021200-82560-6 0-00-021200-82221-6 0-00-021200-82220-9 11 11 22 11 LBS 3748* OffWhite Good thermal shock resistance. Non-corrosive to copper for many electronic applications. Bonds polyolefins. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 62-3748-9132-3 62-3748-9830-2 62-3748-9330-3 0-00-021200-76374-8 0-00-021200-82584-2 0-00-021200-82585-9 11 11 22 LBS 3748 VO Light Yellow Self-extinguishing version of 3748. Meets UL 1410 requirements. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 62-3768-9132-1 62-3768-9830-0 62-3768-9330-1 0-00-021200-85795-9 0-00-021200-85816-1 0-00-021200-85797-3 11 11 22 LBS 3750 Tan Low viscosity for high flow rate, increased production. Good hot tack, quick grab for packaging and woodworking. 1/2" x 10" AE 62-3726-9531-2 0-00-051111-91711-4 11 LBS 3750 Clear Low viscosity for high flow rate, increased production. Good hot tack, quick grab for packaging and woodworking. 1/2" x 10" AE 62-3729-9531-6 0-00-051111-91712-1 11 LBS 3762 Tan Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard and wood. Economical, general purpose. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3762-9132-4 62-3762-9830-3 62-3762-9330-4 62-3762-9531-7 0-00-021200-65261-5 0-00-021200-82615-3 0-00-021200-82614-6 0-00-021200-82596-5 11 11 22 11 LBS 3764* Clear Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene. Flexible at low temperatures. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3764-9132-0 62-3764-9830-9 62-3764-9330-0 62-3764-9531-3 0-00-021200-76054-9 0-00-021200-82599-6 0-00-021200-82598-9 0-00-021200-82597-2 11 11 22 11 LBS 3779* Amber High heat resistance. High strength. Good fuel and oil resistance. Electronics. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 62-3779-9132-8 62-3779-9830-7 62-3779-9330-8 0-00-021200-85799-7 0-00-021200-82603-0 0-00-021200-82602-3 11 11 22 LBS 3789* Brown High performance for plastics. Impact resistant. Bonds vinyl and wood. Good fuel and oil resistance. 5/8" x 8" Q 1" x 3" PG 62-3789-9132-7 62-3789-9330-7 0-00-021200-82369-5 0-00-021200-82371-8 11 22 LBS 3792* Clear Clear, multi-purpose for wood, corrugated, fabric, furniture, upholstery, novelties, and other lightweight materials. 5/8" x 8" Q 5/8" x 2" TC 1" x 3" PG 1/2" x 12" AE 62-3792-9132-1 62-3792-9830-0 62-3792-9330-1 62-3792-9531-4 0-00-021200-65263-9 0-00-021200-82589-7 0-00-021200-82606-1 0-00-021200-82583-5 11 11 22 11 LBS 3797 OffWhite High ball and ring. Low viscosity. Good for electrical potting. 1" x 3" PG 5/8" x 2" TC 62-3797-9330-0 62-3797-9830-9 0-00-021200-82592-7 0-00-021200-82593-4 22 11 LBS 3794 Hi Tack PSA Light Tan Sprayable high tack PSA for bonding plastic, paper, metals, die-cut labels. Bulk chubs 62-3794-6375-5 0-00-051115-81205-7 30 LBS 6111 Tan Sprayable 100% solventless adhesive for most foams, fabrics, plastics, particle board and thin metal. 0.75" x 0.75" chips 62-6111-9335-0 0-00-021200-96589-0 22 LBS 6111HT Tan, Blue Similar to 6111 but has higher heat resistance. Available in tan and blue. 0.75" x 0.75" chips 62-6115-9335-1 62-6113-9335-6 62-6113-9339-8 62-6115-9339-3 0-00-021200-49935-7 0-00-021200-43779-3 0-00-021200-56567-0 0-00-021200-56568-7 22 22 850 850 LBS OffWhite Similar to 6111 but lower than normal viscosity and mainly used on fabrics. 0.75" x 0.75" chips 62-6116-9335-9 0-00-021200-49924-1 22 LBS 6116 *Also available in bulk. 1 – Made from components listed as indirect food additives under FDA regulations for adhesives (21 CFR 175.105) 2 – Brookfield Thermosel Viscometer in Centipoise 3 – ASTM E-28-6-7 4 – Highest temperature that the adhesive will support a 2 psi dead load 5 – Canvas to Douglas Fir 6 – Douglas Fir to Douglas Fir 7– 1/8" semicircular bead, Douglas Fir to Douglas Fir 3M™ Hot Melt Adhesives Systems EC Temp Control Modules Viscosity CPS2 7 Delivery Time for 1" x 3" Cartridge (sec.) Ball & Ring Melt Point3 °F (°C) Heat Resistance4 °F (°C) Peel Strength PIW5 72°F (22°C) Shear Strength PSI6 72°F (22°C) Open Time 1/8" Bead7 (sec.) FDA Listed1 UL 94 Listing 1 4,000 @ 250°F 45 205 (96) 130 (54) 6 480 25 Yes n/a 1 8,250 @ 250°F 47 184 (84) 140 (60) 9 600 40 — n/a 1 10,500 @ 250°F 57 178 (81) 140 (60) 13 350 40 Yes V2 n/a 9,500 @ 250°F n/a 191 (88) 120 (49) n/a n/a 30 Yes n/a 5 12,000 @ 375°F n/a 315 (157) 265 (130) 22 490 30 — n/a 4 2,875 @ 375°F 35 186 (86) 130 (54) 13 375 50 Yes V2 4 4,100 @ 375°F 45 220 (104) 145 (63) 20 430 45 Yes n/a 4 5,000 @ 375°F 65 292 (144) 175 (79) 18 250 45 Yes V2 4 5,000 @ 375°F 65 305 (152) 175 (79) 15 275 30 — VO n/a 1,900 @ 375°F 30–40 200 (93) 125 (52) 6 500 n/a — n/a n/a 4,800 @ 375°F 35–45 178 (81) 135 (57) 12 250 n/a — n/a 3 1,870 @ 375°F 30 201 (94) 130 (54) 7 545 35 Yes V2 4 6,000 @ 375°F 55 190 (88) 140 (60) 14 390 40 Yes V2 5 7,000 @ 375°F 75 325 (163) 300 (149) 18 700 25 Yes n/a 5 5,200 @ 375°F 70 270 (132) 220 (104) 16 570 50 Yes V2 4 5,000 @ 375°F 45 179 (81) 140 (60) 13 250 50 Yes V2 n/a 2,650 @ 375°F 55 304 (151) 170 (77) 10 350 30 Yes V2 n/a 15,000 @ 325°F n/a 224 (107) 120 (49) 16 n/a > 60 Yes n/a n/a 3,000– 5,000 @ 375°F n/a 224 (107) 145 (63) 34 n/a 1 surface: 60 2 surface: 360 — n/a n/a 2,500– 4,500 @ 375°F n/a 284 (140) 175 (79) 26 n/a 1 surface: 180 2 surface: 480 — n/a n/a 1,300 @ 375°F n/a 199 (93) 160 (69) 20 n/a 1 surface: 120 2 surface: 300 — n/a Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 8 3M™ Hot Melt Adhesives Systems 3M™ Hot Melt Applicator System Guide 3M Hot Melt Applicators Systems are trusted solutions that are engineered to help you improve productivity, lower cost and minimize waste in industrial applications. From high volume to detail work, 3M Hot Melt Applicators are uniquely designed to ensure optimum performance through melt-on-demand or progressive feed technology for your production needs. C F 3M Hot Melt Applicator PGIILT ™ 3M™ Hot Melt Applicator PGII •S  upports high-volume demands •R  ear cartridge feed port provides easy loading and continuous flow of adhesive •C  onvenient stands hold applicator in proper standby or hands free position • Adhesive Size: 1" x 3" PG Stick H 3M™ Hot Melt Applicator EC S peed B 3M™ Hot Melt Applicator LT E Lead Product Flexibi lity with Quadrack Converter • Lightweight and easy to use •S  mooth and even flow of adhesive for small to medium size projects •P  alm trigger improves ergonomic comfort • Adhesive Size: 5/8" x 8" Q Stick • Lightweight design provides easy handling • Thumb controlled feeder holds adhesive stick securely and dispenses precisely • On-demand feed control minimizes waste and dripping • Adhesive Size: 5/8" x 2" TC Stick Ea se A De tai lW ork nsitive at Se He Sur faces 3M™ Hot Melt Applicator TC 3M™ Hot Melt Applicator LT with Quadrack Converter • Variable temperature control allows one applicator to do many jobs •P  alm trigger helps improve operator comfort in high demand applications • Accepts quadrack stick size for smooth and even flow • Adhesive Size: 5/8" x 8" Q Stick • Supports high-volume demands • Rear cartridge feed port provides easy loading and continuous flow of adhesive • Convenient stands hold applicator in proper standby or hands free position • Adhesive Size: 1" x 3" PG Stick • Lightweight and easy to use • Smooth and even flow of adhesive for small to medium size projects • Palm trigger improves ergonomic comfort • Adhesive Size: LT Q 5/8" x 8" Q Stick G 3M™ Hot Melt Applicator AEII D 3M™ Hot Melt Applicator TC • Lightweight design provides easy handling • Thumb controlled feeder holds adhesive stick securely and dispenses precisely • On-demand feed control minimizes waste and dripping • Adhesive Size: 5/8" x 2" TC Stick • Contoured grip and wide trigger provide operator comfort and precise control • Positive check valve nozzle helps minimize dripping • Built-in stand helps keep applicator upright, stable and ready for use • Adhesive Size: 1/2" x 10" AE Stick; 1/2" x 12" AE Stick 3M™ Hot Melt Adhesives Systems 9 Adhesives Size Selection 3M™ Hot Melt Adhesives are designed and precisely manufactured for use in a 3M Hot Melt Applicator. When paired together, they work as a system, providing optimal performance for your design needs. Use the guide to select the right size for your application. Output2 (lb/hr) Temperature3 °F (°C) Power (120V) Adhesive Dia. x L (in.) Sticks per Pound Linear Feet per Stick Stock Number 10.0 oz. 2.6 265 (129) 150W 5/8 x 2 TC 55 8 62-9281-9930-6 0-00-021200-82245-2 12 13.8 oz. 2.6 265 (129) 150W 5/8 x 8 Q 15 29 62-9281-9950-4 0-00-021200-89447-3 12 C (Low Temp) 4.3 lbs. 6.0 265 (129) 500W 1 x 3 PG 12 36 Cartridge Feed* 62-9783-9630-7 Cartridge Feed* 0-00-021200-89395-7 Magazine Feed** 62-9783-9830-3 Magazine Feed** 0-00-021200-89396-4 D 3M™ Hot Melt Applicator TC 10.0 oz. 3.5 385 (196) 150W 5/8 x 2 TC 55 8 62-9990-9935-1 0-00-021200-82244-5 12 E 3M™ Hot Melt Applicator TC with Quadrack Converter 13.8 oz. 3.5 385 (196) 150W 5/8 x 8 Q 15 29 62-9990-9950-0 0-00-021200-89445-9 12 F 3M™ Hot Melt Applicator PGII 4.3 lbs. 7.5 385 (196) 500W 1 x 3 PG 12 36 Cartridge Feed* 62-9938-9630-7 Cartridge Feed* 0-00-021200-22033-3 Magazine Feed** 62-9938-9830-3 Magazine Feed** 0-00-021200-22034-0 G 3M™ Hot Melt Applicator AEII 20.0 oz. 4.0 400 (204) 100W 1/2 x 10 AE 1/2 x 12 AE 19 14 23 30 62-9796-9930-3 0-00-021200-96594-4 6 24.0 oz. 5.5 260–450 (127–232) 350W 5/8 x 8 Q 15 29 62-9680-9930-9 0-00-021200-89519-7 12 Product/Cat # 3M Hot Melt Applicator LT A (Low Temp) Low Melt ™ Low Melt or Holt Melt Hot Melt Lead Product B 3M™ Hot Melt Applicator LT with Quadrack Converter (Low Temp) 3M™ Hot Melt Applicator PGIILT H 3M™ Hot Melt Applicator EC UPC Number Warranty (Months) Weight 1 Adhesive Type Select a 3M™ Hot Melt Applicator to fit your needs. * Cartridge Feed holds up to 2 adhesive sticks (1" x 3") and the applicator holds 3 more in the chamber for a total of 5. ** Magazine Feed holds up to 9 adhesive sticks (1" x 3") and the applicator holds 3 more in the chamber for a total of 12. 1 – Weight shown is for applicator only; does not include adhesive capacity. 2 – Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow. 3 – Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value. Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. Note: Repair parts are available. Reference owner manuals for information. 12 12 10 3M™ Hot Melt Adhesives Systems Accessories to improve productivity. 3M™ Hot Melt Applicator Accessories and Parts are designed to offer versatility, when dispensing 3M Hot Melt Adhesives. Uniquely designed for 3M Hot Melt Applicators, these accessories and parts maximize the use of 3M Hot Melt Adhesives by improving productivity, optimizing precision, and reducing waste in your assembly process. Description Stock Number UPC Number Case Qty Billing Unit 9725* .072" Mini Extension Tip 62-9725-9930-2 0-00-021200-21786-9 3 CS 9726* “T” Tip Assembly 62-9726-9930-0 0-00-021200-64542-6 3 CS “L” Tip with Adapter 62-9727-9930-8 0-00-021200-64543-3 3 CS 9729* High Viscosity Valve (TC, EC, PG II) 62-9729-9930-4 0-00-021200-64840-3 3 CS 9785* .07" Tapered Aluminum Extension 62-9785-9930-6 0-00-021200-82554-5 3 CS 2-hole Spreader 62-9913-9930-4 0-00-021200-21830-9 3 CS 9916* 3-hole Spreader 62-9916-9930-7 0-00-021200-21836-1 3 CS 9917* 3-hole 1" Spreader 62-9917-9930-5 0-00-021200-21837-8 3 CS .090" Fluted Tip 62-9921-0066-9 0-00-021200-21840-8 3 CS .063" Fluted Tip 62-9922-0066-7 0-00-021200-21841-5 3 CS .125" Fluted Tip 62-9940-6920-1 0-00-021200-22036-4 3 CS .072" Brass Extension 62-9946-6980-2 0-00-021200-22040-1 3 CS Product/Cat # 9726 9727* 9725 9913* 9727 9729 9785 9921* 9916 9913 9917 9922* 9940* 9921 9922 9940 9946 9946 *Tip works with all 3M™ Hot Melt Applicators except 3M™ Hot Melt Applicator AEII. Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. Note: Repair parts are available. Reference owner manuals for information. 3M™ Hot Melt Adhesives Systems 11 Description Stock Number UPC Number Case Qty Billing Unit For use with PG II and PG II LT 62-9945-9930-6 0-00-021200-22039-5 1 CS For use with EC, TC and LT 62-9945-9935-5 0-00-021200-82418-0 1 CS 9276 3M™ Hot Melt Applicator Bench Mount Includes bench nozzle assembly (Does not include applicator) 62-9276-9930-6 0-00-021200-82277-3 1 CS 9233 3M™ Hot Melt Applicator PGII and PGIILT Bench Mount Assembly For use with bench mounted applicator 62-9233-2781-1 0-00-021200-21713-5 1 CS 9277 3M™ Hot Melt Applicator Foot Pedal Assembly For use with bench mounted applicator 62-9277-9930-4 0-00-021200-82278-0 1 CS 9761 3M™ Hot Melt Applicator TC Palm Trigger For use with Quadrack converter 62-9761-9930-7 0-00-021200-82701-3 10 CS 9275 3M™ Hot Melt Applicator Quadrack Converter To add Quadrack capability to TC and LT applicators 62-9275-9935-7 0-00-021200-83536-0 10 CS 9234 PG ASSY 3M™ Hot Melt Applicator TC/EC/LT Valve Assembly Kit Nozzle and valve replacement for TC, EC, LT 62-9234-9930-5 0-00-021200-21714-2 1 CS Product/Cat # 9945 PGIIBhSd 3M™ Hot Melt Applicator Heavy Duty Benchstand Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. Note: Repair parts are available. Reference owner manuals for information. For more products and information, visit 3M.com/HotMeltAdhesives or call 1-800-362-3550 Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Warranty, Limited Remedy and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING,CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 Phone 800-362-3550 Fax 877-369-2923 Web 3M.com/HotMeltAdhesives 3M is a trademark of 3M. © 3M 2016. All rights reserved. 78-6900-2947-1