3S900-13

8 TM 3M 7 6 5 4 3 2 1 NOTES MINI STACK CONNECTOR, HAND TOOL 1 SEE TECH SHEET TS-2725 FOR APPLICABLE CONNECTORS. 2 REFERENCE PRODUCT SPECIFICATION PS-0365 D D BASE PLATE HANDLE WIRE GUIDE HOLDER C C 78-5100-2728-3 A REVISION ORDER INFORMATION WIRE OD ACCOMMODATION 3M PART NUMBER mm (mil) 3S900-13 0.6 to 1.0 (24 to 39) 3S900-16 over 1.0 to 1.5 (39 to 59) DRAWING NUMBER 160 B 228 25 A 47 95460 FEB 05,2021 LDS FJR INITIAL RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L SCHMIDT FEB 03,2021 CHKD DATE DIVISION CODE C 3M Center DO NOT SCALE DRAWING 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 8 1 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2018 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 7 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 2 .0 .00 .000 .0000 MILLIMETERS 0 2 .0 .5 .00 0.13 .000 .005 ANGLES 1 MN 55144 DRFT CHKD MFG DATE APPVL DATE F RODRIGUEZ FEB 05,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M MINI STACK CONNECTOR HAND TOOL 3S900-1X CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2728-3 DET. LISTS 1 YES NO A SHT 1 OF 2 Imaged: Central Standard Time 2/5/2021 -- UTC Offset (hrs) 6 B A 8 7 6 5 4 3 2 1 3MTM MINI STACK CONNECTOR, HAND TOOL D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C 78-5100-2728-3 A REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. DRAWING NUMBER Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Company Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect B B A 95460 FEB 05,2021 LDS FJR INITIAL RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE L SCHMIDT FEB 03,2021 CHKD DATE DIVISION CODE C 3M Center DO NOT SCALE DRAWING 1 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 8 7 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 2 .0 .00 .000 .0000 MILLIMETERS 0 2 .0 .5 .00 0.13 .000 .005 ANGLES 1 MN 55144 DRFT CHKD MFG DATE APPVL DATE F RODRIGUEZ FEB 05,2021 3M COPYRIGHT 2021 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3M MINI STACK CONNECTOR HAND TOOL 3S900-1X CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2728-3 DET. LISTS 1 YES NO A SHT 2 OF 2 Imaged: Central Standard Time 2/5/2021 -- UTC Offset (hrs) 6 C A