4510 Technical
Data Sheet
3M™ Protective Coverall 4510
Description
Typical Applications
The 3M Protective Coverall 4510 is designed to help protect against certain
light liquid splashes (Type 6) and hazardous dusts (Type 5).
Typical applications may include asbestos inspection, coal dust in power plants,
metal polishing, light-duty building cleaning, machine or vehicle maintenance,
paint spraying, pharmaceutical, general industrial clean-up, insulation
installation, general powder handling and food processing.
™
The key features include:
• Constructed of quality laminated microporous material
• Elasticized waist, ankles, and wrists for convenience and freedom
of movement
• Two-way zipper with storm flap
• Low-linting
In all cases a risk assessment should be carried out. Users must be trained and
have read all User Instructions. Use limitations and performance data should
be considered to ascertain the protection required. If in doubt, contact a safety
professional.
Performance
• Anti-static coating on both sides
The table below shows the performance of this product when tested under
laboratory conditions. Please note that the tests may not reflect the reality of
use and do not account for factors such as excessive heat and mechanical wear.
Materials
• Suit: Polypropylene/Polyethylene Laminate Film, White
Test
• Zipper: Nylon on Polyester Braid
• Elastic: Neoprene Rubber
Abrasion
• Thread: Polyester
Flex Cracking
• Basis Weight: 47 grams/m2
This product does not contain components made from silicone or natural
rubber latex.
Approvals
CE approved under PPE Directive (89/686/ECC), Category III.
Article 10 Certification: BTTG Testing & Certification Ltd. Notified Body Number:
0338. Article 11B Supervision: SGS United Kingdom, LTD.
Notified Body Number: 0120.
Comfort and Protection
Standard
ASTM D4157
Cycles to Rupture
Result
1000
Standard*
Class**/
Result
EN 530
Class 1
ISO 7854
Class 5
ISO 9073-4
Class 1
Tear Resistance Trapezoidal
ASTM D5733 (warp
direction/fill direction)
11 lbf / 5 lbf
Tensile Strength
ASTM D751, Section 11,
Procedure A (longitude/
traverse)
12 lbs / 20 lbf ISO 13934-1
Class 1
Puncture Resistance
ASTM D2582 (MD/CD)
36N / 25N
EN 863
Class 1
Bursting Resistance
ASTM D751, Section 18
80N
ISO 13938-1
Class 1
Resistance to Ignition
CPSC 16 CFR PT 1610
Class 1
EN 13274-4
Pass
Seam Strength
ASTM D751, Section 66
8 lbf / 4 lbf/in EN ISO 13935-2
(Peak Load/Seam Strength)
Hydrostatic Resistance
ASTM D751, Procedure B
Class 1
1185 mm
Liquid Protection
Type 6 (EN 13034). Whole suit reduced spray test (EN ISO 17491-4-2008)*
Repellency to Liquids*** –
30% H2SO4
Dust Protection
Type 5 (EN ISO 13982-1:2004). Inward Leakage results:
Ljmn,82/90 < 30 %; LS,8/10 < 15 %.
Liquid Penetration
Resistance*** – 30% H2SO5
EN ISO 6530
Class 3 of 3
Anti-static
Anti-static coating on both sides (EN 1149-1:2006/ EN 1149-5:2008)**
Repellency to Liquids*** –
10% NaOH
EN ISO 6530
Class 3 of 3
Nuclear
Radioactive particulates (EN 1073-2:2002), Class 1***. Does not offer
protection against radiation.
Liquid Penetration
Resistance*** – 10% NaOH
EN ISO 6530
Class 3 of 3
Anti-static Coating on
Both Sides
EN 1149-1:2006/
Pass
EN 1149-5:2008
Radioactive Particulates
EN 1073-2
* In the whole suit test, liquid spray is applied to the subject for 1 minute. During this time the subject moves gently
and is rotated through 360°. A total of 1.88 liters is sprayed from four nozzles. The clothing is allowed to drain
for 2 minutes and then the absorbent coverall is inspected for stains which are compared to a calibration stain.
Requirement: Passes when the stained area inside is smaller than 3 times the calibration stain area.
** All apparel must be suitably grounded for anti-static treatment to be effective. Electrostatic propensity may decrease
with wearing time and/or severe conditions.
*** Except puncture resistance.
Applications and Performance
Non-Hazardous Particulates
Yes
Hazardous Liquid Splash
No*
Non-Hazardous Liquid Splash
Yes
Hazardous Liquid Spray
No
Hazardous Dusts and Fibers
Yes
Organic Solvents
No
Liquid Continuous
Contact/Immersion
No
Acids/Alkalis
Yes, if chemical is
compatible with
suit material*
Gases and Vapors
No
* F or additional chemical penetration and repellency data, please contact your local 3M Technical Service Representative.
EN ISO 6530
Class 3 of 3
Class 1 of 3
* The standards EN 13034:2005 and EN ISO 13982-1:2004, and EN 1073-2:2002 define performance classes.
** The maximum Class is 6 unless otherwise noted.
*** The European Standard EN ISO 6530 measures liquid penetration through a fabric and liquid repellency by a fabric.
The test simulates exposure to small amounts of chemicals (10 ml) for 1 minute duration only. The penetration index
refers to the percentage of the original quantity which penetrates the fabric within 1 minute (in a detector beaker) as a
percentage of the original quantity.
4510
Use Limitations
Storage and Disposal
Do not use for:
• Store in dry, clean conditions in original packaging
• Contact with heavy oils, sparks or flames, or combustible liquids
• S tore away from direct sunlight, sources of high temperature, and
solvent vapors
• Exposure situations resulting in spray or liquid buildup on the suit
• Environments with high mechanical risks (abrasions, tears, cuts)
• E nvironments with exposure to hazardous substances beyond
CE Type 5/6 certification
• S tore within the temperature range -20°C to +25°C (-4°F to +68°F) and with
relative humidity below 80%
• S helf life is three years from date of manufacture when stored as stated above
• Environments with conditions of excessive heat
•R
eplace garments if damaged, heavily contaminated or in accordance with
local work practice
Sizing
•H
andle and dispose of contaminated garments with care and in accordance
with national regulations
An appropriate size garment should be selected to allow sufficient movement for
the task. Meets ANSI 101-1996 (R2008) sizing guidelines.
Height
Chest
M
66 – 69 in
167 – 176 cm
36 – 39 in
92 – 100 cm
L
69 – 71 in
174 – 181 cm
39 – 43 in
100 – 108 cm
XL
70 – 74 in
179 – 187 cm
43 – 45 in
108 – 115 cm
XXL
73 – 76 in
186 – 194 cm
45 – 49 in
115 – 124 cm
3XL
76 – 78 in
194 – 200 cm
49 – 52 in
124 – 132 cm
4XL
78 – 81 in
200 – 206 cm
52 – 55 in
132 – 140 cm
2
Limited Use
Do not tumble dry
Do not wash
Do not dry-clean
Do not bleach Flammable — keep away
from sparks or flames
Do not iron
Product must never be altered or modified.
For more information on 3M products and services please contact 3M.
Important Notice
This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective clothing, the wearer must read and understand the
user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional. Sections of the most appropriate PPE will depend on the
particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE.
Final determination as to the suitability of these products for a particular situation is the user’s responsibility. This information is subject to revision at any time. Always read and follow
all User Instructions supplied with your 3M™ Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service.
WARRANTY: 3M will replace or refund the purchase price of any Occupational Health and Environmental Safety Division (OH&ESD) product found to be defective in
material, manufacture, or not in conformance with any express warranty. This warranty is exclusive and is in lieu of any implied warranty of merchantability or fitness for
a particular purpose.
LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential
rising out of the sale, use or misuse of 3M OH&ESD products, or the user’s inability to use such products. THESE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE.
For More Information
Technical Assistance in U.S.
1-800-243-4630
3M.com/PPESafety
Technical Assistance in Canada 1-800-267-4414
3M.ca/PPESafety
Occupational Health and
Environmental Safety Division
3M Center
Building 235-2NW-70
St. Paul, MN 55144-1000
3M Canada Company OH&ESD
P.O. Box 5757
London, Ontario N6A 4T1
Canada
3M is a trademark of 3M,
used under license in Canada.
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
75-0501-0414-2
