4540+CS-BLK-XXL

3M™ Protective Coverall 4540+ Technical Datasheet Description The 3M™ Protective Coverall 4540+ is designed to help protect against hazardous dusts (Type 5) and certain light liquid splashes (Type 6). Comfort and Protection Liquid Protection Type 6 - Light Liquid Splashes (EN 13034:2005 + A1:2009) Dust Protection Type 5 - Solid Airborne Particulates (EN ISO 13982-1:2004 +A1:2010) Anti-static Anti-static coating on inner surface1 (EN 1149-5:2008) Nuclear Radioactive particulates (EN 1073-2:2002) Class 1 Except EN863 puncture resistance and EN13274 resistance to injection. Does not offer protection against radiation. All apparel must be suitably grounded for anti-static treatment to be effective. White material only. 1 Approvals Sizing 2 These products are type examined by SATRA Technology Europe Ltd ., Notified Body number 2777 and audited annually by SGS, Notified Body number 0598. An appropriate size garment should be selected to allow sufficient movement for the task whilst maintaining a secure fit. Height These products are CE marked to the requirements of European Regulation (EU) 2016/425. The CE Certificate and Declaration of Conformity can be reviewed at www.3M.com/Body/certs Materials Chest S 64 – 67 in 164 – 170 cm 33 - 36 in 84 – 92 cm M 66 – 69 in 167 – 176 cm 36 – 39 in 92 – 100 cm L 69 – 71 in 174 – 181 cm 39 – 43 in 100 – 108 cm XL 70 – 74 in 179 – 187 cm 43 – 45 in 108 – 115 cm Suit Polypropylene and Polyethylene Laminate 55gsm (white) Back Panel SMMMS Polypropylene (blue) XXL 73 – 76 in 186 – 194 cm 45 – 49 in 115 – 124 cm Zipper Nylon on Polyester Braid 3XL 76 – 78 in 194 – 200 cm 49 – 52 in 124 – 132 cm Elastic Synthetic Rubber (non-latex) 4XL 78 – 81 in 200 – 206 cm 52 – 55 in 132 – 140 cm Cuffs Polyester Thread Polyester/cotton This product does not contain components made from silicone or natural rubber latex. 2  he values above are the result of illustrative lab test measures and should not T be considered as a commitment from 3M 3M™ Protective Coverall 4540+ Storage and disposal Applications and performance ŔŔ S  tore in dry, clean conditions in original packaging, away from direct sunlight, sources of high temperature, and solvent vapours Non-Hazardous Particulates Yes Hazardous Liquid Splash Yes, if chemical is compatible with suit material4 Non-Hazardous Liquid Splash Particulates Yes Hazardous Liquid Spray No Hazardous Dusts and Fibres Yes Organic Solvents No Liquid Continuous Contact/Immersion No Acids/ Alkalis Yes, if chemical is compatible with suit material4 Gases and Vapours No ŔŔ S  tore within the temperature range -20°C to +25°C (-4°F to +77°F) and with relative humidity below 80% ŔŔ E  xpected shelf life is three years from date of manufacture when stored as stated 3 ŔŔ R  eplace garments if damaged, heavily contaminated or in accordance with local work practice or regulations ŔŔ H  andle and dispose of contaminated garments with care and in accordance with applicable regulations The shelf life as defined above remains an indicative and maximum data, subject to many external and non-controllable factors. It may never be interpreted as a warranty. 3 Do not wash Do not dry clean Do not bleach Flammable — keep away from sparks or flames Do not iron The chemicals against which the product has been tested and certified are listed in the user instructions and shown in the following table. For additional chemical penetration data, please call your local 3M Technical Service Representative or visit the 3M Chemical Test library on http://go.3M.com/CHTL 4 Limited use Single use — do not re-use Do not tumble dry Warnings and limitations Before use read and understand all user instructions and be sure that the product is suitable for the application and fitted correctly. Product must never be altered or modified. Do not use for: ŔŔ C  ontact with heavy oils, sparks or flame, or combustible liquids; ŔŔ E  nvironments with high mechanical risks (abrasions, tears, cuts); ŔŔ C  ontact with hazardous substances beyond Type 5/6 certification; ŔŔ Environments with conditions of excessive heat. In all cases, a risk assessment should be carried out. Always read product user information. Use limitations and performance data should be considered to ascertain the protection required. If in doubt, contact a safety professional. For more information on 3M products and services please contact 3M. 3M™ Protective Coverall 4540+ The table below shows the performance of this product when tested under laboratory conditions in accordance with the referenced standard test method. Note: The maximum Class is 6 unless otherwise noted. Test Standard/test method Class/result Abrasion resistance EN 530:2010 (visual assessment) Class 1 Flex cracking (visual assessment) ISO 7854:1995 Class 6 Tear resistance ISO 9073-4 :1997 Class 1 Tensile strength EN ISO 13934-1:1999 Class 1 Puncture resistance EN 863:1995 Class 1 Resistance to blocking EN 25978:1990 No Blocking Seam strength EN ISO 13935-2:1999 Class 2 Test Standard/test method Class/result Repellency to liquids – 30% H2SO4 EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – 30% H2SO4 EN ISO 6530:2005 Class 3 of 3 Repellency to liquids – 10% NaOH EN ISO 6530:2005 Class 3 of 3 Liquid penetration resistance – 10% NaOH EN ISO 6530:2005 Class 3 of 3 Anti-static coating on inner surface (white material only) EN 1149-1:2006 Pass Radioactive particulates (TIL) EN 1073-2:2002 Class 1 of 3 Visit the 3M Chemical Test Library for an online repository of available chemical data for 3M™ Protective Coveralls: http://go.3M.com/CHTL IMPORTANT NOTICE The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application. All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user. Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control. Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation. Personal Safety Division 3M Centre Cain Road, Bracknell Berkshire RG12 8HT www.3M.eu/safety 3M is a trademark of 3M Company. Please recycle. Printed in the United Kingdom. © 3M 2019. All rights reserved. Version: 4540+.2 J457673