5433AMBER,4INX36YD

Technical Data | August 2016 3M™ Low Static Polyimide Film Tape 5433 (Linered) Product Description 3M™ Low Static Polyimide Film Tape 5433 is a clear PET linered version of 3M™ Low Static Polyimide Film Tape 5419. It is a translucent, polyimide film-backed amber silicone adhesive tape with extremely low electrostatic discharge properties. Key Features • • • • • Polyimide film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures Dimensionally stable at high temperatures to help prevent rework and enable high productivity Flame retardant, chemical and radiation resistant to help protect surfaces and reduce replacement costs Silicone adhesive's high temperature performance reduces adhesive transfer to help eliminate cleaning, enabling high productivity Halogen Free* *Halogen Free is defined as having maximum 900ppm bromine, maximum 900ppm chlorine, and maximum 1500ppm total bromine and chlorine, per 61429-2-21 Key Attributes 3M™ Low Static Polyimide Film Tape 5433 (Linered) Features Advantages Polyimide film Silicone adhesive Low static Unique release liner Dimensionally stable at high temperatures Flame retardant and chemical resistant High temperature performance reduces adhesive transfer Virtually eliminates circuit board degradation due to electrostatic discharge Easy release from silicone adhesive Benefits Helps promote high productivity Protects surfaces, helping reduce replacement Helps promote high productivity Helps reduce costly board waste due to component failure Capability to product die cut parts Product Construction/Material Description Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Low Static Polyimide Film Tape 5433 (Linered) Property Value Backing Material Adhesive Type Tape Color Liner Product Form Standard Roll Length Polymide Silicone Amber Clear PET Roll 36 yards (33 meters) Applications • • Mask for printed circuit boards during wave solder or solder dip process Used as release surface in fabrication of parts cured at elevated temperatures 3M™ Low Static Polyimide Film Tape 5433 (Linered) Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is shipped with the commercialized product. 3M™ Low Static Polyimide Film Tape 5433 (Linered) Property Method* Adhesion to Steel Tensile Strength at Break D-3330 D-3759 Elongation at Break Backing Thickness Liner Thickness Total Tape Thickness Temperature Use Range Dielectric Strength Insulation Resistance Static Charge D-3759 D-3652 D-3652 D-3652 D-149 - Removal from Liner Removal from PWB - Outgassing Flame Retardancy E-595 per UL-510 product category: OANZ2 File E230409 Value 20 oz./in. width (22 N/100 mm) 33 lbs./in. width (578 N/100 mm) 60% 1 mil (0.03 mm) 3 mil (0.08 mm) 2.7 mil (0.07 mm) -73° to 260°C) -100° to 500°F 7000 volts >1*106 ohms (measured at 50% RH, 70°F (21°C) in an ESD controlled environment)