564-BULK

Scotchlok 564 ™ Self-Stripping Electrical Connectors Data Sheet Application Installation Instructions Use Part No. 564 to electrically connect two wires in a tap, inline, pigtail, or double run installation and insulate the connection.
WARNING Wire Range 18-14 AWG (.75-1.5 mm2) solid or stranded copper conductors. For use with common thermoplastic insulated wires such as: T, TF, TFF, TFN, TFFN, AWM, TEW, SAE-GPT with a maximum insulation diameter of .145 inches (3,5 mm). Maximum recommended current for general purpose applications: 18 AWG - 7 AMPS, 16 AWG - 10 AMPS, 14 AWG - 15 AMPS. Construction U-contact - Tin plated brass, .03 in. (.8 mm) thick Insulator - Polypropylene Color - white Weight .0032 lb. (1.45 gm) Recommended Installation Tools 9” Linemans Pliers Mechanics (slip joint) Pliers 3M™ Crimping Tool No. E-9BM Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. 1. Place unstripped wires inside appropriate channels. 2. On tap, inline, and pigtail applications ends of wires should always be placed midway between connector element and end of connector for proper installation.s 3. Hold tool perpendicular to the wires and make the connection by driving the cap down flush with the top edge of the connector body. 4. Close the hinged top cover until latched. Typical Installations Engineering Specification Self-Stripping Electrical Connector (as manufactured by 3M, part No. 564) capable of connecting 2 solid or stranded copper wires in the range of No. 18 thru No. 14 AWG in a tap, inline, double run, or pigtail application. Connector shall be voltage rated 32 volts maximum, and temperature rated 90˚C maximum. ‘3M’ and ‘Scotchlok’ are trademarks of 3M Company. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/elpd Litho in USA ©3M 2003 78-8126-5859-5-A