6-5-9325

UHMW Polyethylene Tape 5430 ∙ 9324 ∙ 9325 Technical Data July, 2016 Product Description 3M™ UHMW Polyethylene Tapes are a film coated with an acrylic adhesive to help control squeaks and rattles due to vibration or wear of metal and plastic materials. Product Construction Backing Adhesive Color UHMW-PE Film (ultra-high molecular weight polyethylene) Acrylic 5430 - Translucent 9324 – Black 9325 - Translucent Typical Physical Properties 36 yds. (32.9 m) Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. ASTM Test Method 3M tape 5430 Adhesion to Steel: Tensile Strength: Elongation at Break: Backing Thickness: Total Tape Thickness: (without liner): Liner Thickness: Temperature Use Range: 3M tape 9324 Adhesion to Steel: Tensile Strength: Elongation at Break: Backing Thickness: Total Tape Thickness: (without liner): Liner Thickness: Temperature Use Range: 3M tape 9325 Adhesion to Steel: Tensile Strength: Elongation at Break: Backing Thickness: Total Tape Thickness: (without liner): Liner Thickness: Temperature Use Range: G/COE/Product Technical Data Sheets/425.431.438.1433.1437 Standard Roll Length 66 oz./in. width (72 N/100 mm) 43 lbs./in. width (745 N/100 mm) 400% 5.1 mils (0.13 mm) 7.4 mils (0.19 mm) D-3330 D-3759 D-3759 D-3652 D-3652 3.2 mils (0.08 mm) -30° to 225°F (-34° to 107°C) D-3652 75 oz./in. width (82 N/100 mm) 40 lbs./in. width (700 N/100 mm) 450% 4.9 mils (0.13 mm) 7.2 mils (0.18 mm) D-3330 D-3759 D-3759 D-3652 D-3652 2.0 mils (0.05 mm) -30° to 225°F (-34° to 107°C) D-3652 66 oz./in. width (73 N/100 mm) 27 lbs./in. width (470 N/100 mm) 410% 3.0 mils (0.08 mm) 5.3 mils (0.13 mm) D-3330 D-3759 D-3759 D-3652 D-3652 2.0 mils (0.05 mm) -30° to 225°F (-34° to 107°C) D-3652 Features   Tapes demonstrated no evidence of wear through after Taber Abrasion at 1000 cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet. Low water vapor transmission rate