61500064490

  Scotch-Brite™ Surface Conditioning Belt, 1/4 in x 18 in A MED, 20 per case 3M ID 61500064490, UPC 00048011142760       Specifications Applications Back Color Backing Material Brand Color Converted Form Equipment Machines Front Color Grade Industries Length Length (Metric) Mineral Type Position Product Form Sub Industries Cleaning, Deburring, Finishing, Grinding, Surface Preparation Maroon Scrim Scotch-Brite™ Maroon File Belt File Belt Sanders, Inline Sanders, Manual Backstand Maroon MED Marine, Metalworking 18 Inch 457.2 mm Aluminum Oxide Better Belt Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines Width Width (Metric) 0.25 Inch 6.35 mm Product Details   Non-woven, surface conditioning belts clean, blend, deburr and finish Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results  Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges  Removes surface imperfections, grindlines, mill, and other marks Scotch-Brite™ SC Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals. Versatile Abrasive: Tackling Woods and Metals Scotch-Brite™ SC Surface Conditioning belts work well to remove coarse grindlines, mill marks, or small burrs left by cutting tools or conventional abrasives. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. Choose the Right Belt for You At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners. Hard-Working Minerals: Aluminum Oxide and Silicon Carbide Scotch-Brite Surface Conditioning Belts options We manufacture Scotch-Brite™ SC Surface Conditioning Belts with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. An Alternative for Wheels and Discs Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.