70001200073

3M™ Specular Film Protected - D50F Technical Data Sheet Release A, January 2014 Product Characteristics Typical values for SFP-D50F shown below are based on test data deemed reliable but not warranted, except for those values identified in the Warranted Characteristics section. Physical Characteristic Value Test Total Thickness (with Premask) 0.0045 in (0.11 mm, 4.5 mils) Micrometer Film only 0.0033 in (0.084 mm, 3.3 mils) Micrometer Premask 0.0012 in (0.030 mm, 1.2 mils) Micrometer Construction 100% polymeric N/A Electrical Product Description 3MTM Specular Film - Protected D50F(“SFP-D50F” or “Product”) consists of the next generation of 3M’s high performance ultra-high reflectivity film, which is greater than 98.5% reflective over the full visible spectrum and all incident angles. SFP-D50F is specially formulated to provide significantly increased lifetime when used in high intensity LED light engines over the standard SFP product. The Product also shows significant lifetime improvement over the standard SFP product for UV irradiance stability. A protective coating on the premask side provides abrasion resistance to allow for mild cleaning. Recommended End Uses SFP-D50F is particularly well suited as a cavity reflector applique for planar and conical surfaces. The Product is available as a sheet kit and as custom cut shapes. Key Attributes • Superior specular reflectivity at >98.5% • UV and high intensity LED irradiance stability • Abrasion resistant coating • Nonconductive 100% polymeric film • Cut to custom shapes Dielectric Strength 12.0 ± 1.0 (kV) ASTM D257/D149 ≥ 98.5% ASTM E1164/E308 CIE a*, b* 0 ± 2 unit CIE u, v ≤ 0.001 ASTM E1164/E308 4000K LED or D65, 2° Observer Optical Photopic Reflectivity Reflected Color Shift Operating Temperature Range Up to 105°C. Recommended Storage Conditions Shrinkage At Operating Temperature Store SFP-D50F in its original container, out of direct sunlight, in a clean, dry area, at 40° to 100°F (4° to 38°C), for no more than one year. Characteristic Value Test 105°C, 15 mins ≤ 0.5% 3M Warranted Characteristics Environmental Performance Optical and physical properties stable under these test conditions: Cycle Environment/Duration Cold Temperature -40°C, 1000 hrs Hot Temperature/Dry 100°C, 1000 hrs Hot Temperature/Humid 65°C/95% RH, 1000 hrs Thermal Shock -40°C to 85°C, 100 cycles, 1 hour dwell Total Reflectivity