70F-110-20-PB

Specialty Terminals 70F-110-20-PB, 70F-110-32-PB Female Quick-Slide, Vinyl Insulated with Insulation Grip L Data Sheet 3M™ Product Number Wire Range (AWG) Mates with Tab 70F-110-20-PB 26-22 70F-110-32-PB 26-22 L Barrel I.D. Maximum Insulation Diameter .110 x 0.20 0.63 .040 .075 .110 x .032 0.63 .040 .075 Width x Thickness Specifications Wire Size: Barrel Seam: Maximum Operating Temp: Maximum Current: Insulator Material: Terminal Material: Insulation Grip Material: Plating: Installation Information See Table Above Butted with Insulation Grip 221˚F (105˚C) Same as Wire Vinyl Brass Copper Tin  WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. For use on stranded copper wire only. Strip away the end 3/16 inch of wire insulation. Make the crimp in the proper station of a recommended 3M Scotchlok Crimping Tool TH-450. Barrel Crimp (Electrical) Insulation Crimp (Mechanical) Engineering Specification Crimp-Type Female Quick-Slide connectors shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The Vinyl Insulated Miniature 0.110˝ Female Disconnect with insulation grip, shall be tin plated 0.010˝ thick brass with a tongue for gripping a 0.110˝ male tab of either 0.020˝ or 0.032˝ thickness and with a barrel covered by a copper insulation grip, which is covered by a vinyl sleeve, color coded and sized for a specified (AWG) wire range (26-22). The connector line shall offer tongue variations (sized to grip male tabs 0.110˝ x 0.020˝ or 0.110˝ x 0.032˝) and barrel variations in construction, non- insulated, vinyl insulated with insulation grip, nylon fully insulated, etc. 3M and Scotchlok are trademarks of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture for a period of five (5) years from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800-245-3573 Fax 800-245-0329 www.3M.com/electrical Please recycle. Printed in USA. © 3M 2007. All rights reserved. 78-8131-7368-5-A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 70F-110-32-PB 70F-110-20-PB