75347203335

Product Bulletin DF2000PE Release A, Effective April 2011 See Bulletin Change Summary at end of Bulletin Daylighting Film DF2000PE Product Description 3MTM Daylighting Film DF2000PE is a polymeric film providing specular reflection with greater than 99% luminous reflectivity. This metal-free, non-corroding and non-conducting film is well-suited for daylighting applications. It has a pressure-sensitive adhesive for a secure bond and a polyethylene liner to protect its reflective surface during installation. Recommended End Uses Film DF2000PE may be used for a variety of commercial and residential applications. Unsuitable End Uses  Exposure to: - Sunlight radiation wavelengths less than 380 nm - Abrasive conditions, which may scratch the film Characteristics These are typical values for unprocessed product; processing may change the values. Contact your 3M representative for a custom specification. Product Availability The product is available in a 5 sheet kit, 24” x 36” (75-3472-0333-5). To inquire about product availability in other formats, please contact your customer service representative at the number below. Optical Characteristics Characteristic Value Test Luminous Reflectivity > 99% ASTM E1164-02/ E308-01 ASTM E116402/E308-01 Color a* b* Bandwidth, 90% Reflectivity -2 < a* < 2 -2 < b* < 2 400 to 775 nm 3M (0 to 80 angle of incidence) Wavelengths Transmitted > 775 nm 3M (0 to 80 angle of incidence) Physical Characteristics Wavelengths Absorbed < 400 nm 3M Usage Angle 0 to 90 degrees 3M Characteristic Value Test Film Polymeric film - Liner, Adhesive Polyester - Liner, Protective Polyethylene - Adhesive Width Film and Liners Adhesive Total Thickness (nominal) Pressure-sensitive - 51 inches (130 cm) > 49 inches (125 cm ) 6.1 mils (155 m) 3M 2.6 mils (66 m) 1.5 mils (38 m) 0.9 mils (23 m) 1.1 mils (28 m) 2 25 sq ft/lb (5 m /kg) 3M Characteristic Value Test Tensile Strength (film) > 35 lb/in (6.2 kg/cm) ASTM D-882 Elongation at Break (film) > 60% ASTM D-882 Film Adhesive Liner, Adhesive Liner, Protective Total Density (film, adhesive and liners) Physical Characteristics, continued 2 Modulus (film) > 550 lb/in (39 2 kg/cm ) ASTM D-882 Heat Shrinkage (film) < 1% at 302F (150C), 15 minutes ASTM D-1204-02 Reflectivity (%) Typical Normal Angle Spectral Response 100 80 60 40 20 0 250 350 450 550 650 Wav elength (nm) Film Only Application Characteristics Characteristic Description Surface Type Flat and simple curved surfaces Substrate Type  Laminated on any substrate the user tests and approves  Cold formed on aluminum sheeting Application Temperature 72F (22C) minimum  Handling and Fabrication CAUTION Before using any equipment, always follow the manufacturers' instructions for safe operation. Product Bulletin DF2000PE - 2 Handling. Since a roll of this film typically weighs more than 1000 pounds (454 kg), lifting equipment is required when handling the film. Application Temperature. 72F (22C) minimum Protective Liner. To prevent scratching or marking the film's reflective surface, do not remove the protective liner until all fabrication and installation processes are finished. When ready, carefully remove the liner. Lamination. This film can be applied with a roll laminator. Use a dry application method only. Keep the protective liner on the film during the entire lamination process. Cleaning Do not attempt to dust or clean the film. reflective surface. This can damage the film's Shelf Life, Storage and Shipping Shelf Life One year. Product Bulletin DF2000PE - 3 Storage Conditions  40 to 100F (4 to 38C)  Out of sunlight  Clean dry area Product Use Technical Information  Original container The user is solely responsible for evaluating and determining whether this 3M product is suitable and appropriate for any particular use or manufacturing process in which it may be used. Technical information and data, recommendations, and other statements provided by 3M are based on information, tests, or experience which 3M believes to be reliable, but the accuracy or completeness of such information is not guaranteed. Such technical information and data are intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. The typical values shown should not be used for the purpose of specification limits.If you have questions about this product, contact the Technical Service helpline at 1-800-328-3908. Warranty Information Warranty and Limited Remedy 3M warrants that this 3M Product will conform to 3M specifications for the product at the time of shipment to the Buyer. 3M makes no other warranties, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose or implied warranty arising out of a course of dealing, custom, or usage of trade. If a 3M Product is found not to conform to this warranty within one year of date of Product receipt, Buyer's exclusive remedy, at 3M's option, shall be to refund the purchase price of, or replace the quantity of 3M Product shown to be nonconforming. 3M has no obligation under this warranty with respect to 3M Product that has been modified or damaged through misuse, abuse, accident, neglect, or mishandling by Buyer. Limitation of Liability Except where prohibited by law, 3M shall not under any circumstances be liable to the Buyer for any direct, indirect special, incidental, or consequential damages (including, but not limited to, downtime, loss of profits, revenue, business, opportunity or goodwill) resulting from or in any way related to 3M Products or the sale of 3M Products. This limitation of liability applies regardless of the legal or equitable theory under which such losses or damages are sought including breach of contract, breach of warranty, negligence, strict liability, or any other legal or equitable theory. 3M is a trademark of 3M. Bulletin Change Summary New Writeup. Product Bulletin DF2000PE - 4 3M Architectural Markets Department 3M Center, Building 220-12E-04 PO Box 33220 St. Paul, MN 55144-3220 USA Technical Info. 1-888-650-3497 www.3MArchitecturalMarkets.com E3M 2008. All rights reserved. Product Bulletin DF2000PE - 5