8.3MM-25MM-25-5590H-05 数据手册
Technical Data | July 2020
3M™ Thermally Conductive Acrylic Interface Pad 5590H
Product Description
3M™ Thermally Conductive Acrylic Interface Pad 5590H is designed to provide a preferential heat transfer path between
heat generating components, such as IC Chip or Electric Vehicle (EV) battery, and heat sink or spreader. It consists of
highly conformable, slightly tacky acrylic elastomer sheets filled with thermally conductive ceramic particles. These highperforming thermal pads have the following features:
Key Features
•
•
•
•
•
•
•
•
•
Easy handling and soft pad
High conformability even for non-flat IC surfaces and automotive EV batteries
Incorporates a thin, firm acrylic layer for good handling
Highly thermally conductive while electrically insulating
Slight tack allows pre-assembly
Good wettability for better thermal conductivity
Non-silicone acrylic elastomer
Excellent durability
UL94 V-0 listed (File No. E176845)
Product Construction/Material Description
Thermally conductive conformable layer
Thermally conductive firm layer (less tack) permanent
PET liner (outside of roll)
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes.
3M™ Thermally Conductive Acrylic Interface Pad 5590H
Property
Value
Color
Base resin
Thickness
Filler type
Very low tack layer
Low tack layer
White/Gray
Acrylic
0.5, 1.0mm, 1.5 mm, 2.0 mm (thicker pads available upon request)
Ceramic
Good for re-workability and handling, light gray color-permanent layer
Soft, good thermal conductivity, white color
3M™ Thermally Conductive Acrylic Interface Pad 5590H
Applications
• Heat transfer in consumer electronics and automotive electronic products
• Decrease of compression stress to electronic parts by thermal pad conformability
Examples:
o Heat transfer between PCB and heat sink
o Thermal management in automotive EV batteries
o Power electronics component thermal management
o Chip on film (COF) heat conduction
o Automotive electronics
o LED thermal management
o General gap filling in electronic devices
Typical Physical Properties and Performance Characteristics
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes. Final product specifications and testing methods will be outlined in the product’s Certificate of Analysis
(COA) that is shipped with the commercialized product. This value is a measured value, not a guaranteed value.
3M™ Thermally Conductive Acrylic Interface Pad 5590H
Property
Method
Thermal conductivity
Thermal conductivity
Hardness
Value
Volume Resistivity
3M Method
ASTM D5470
Asker C
Shore 00
ASTM D257
2.8 W/mK
2.0 W/mK *1
55*2
70
6 X 10 11 (Ω-cm)
Dielectric strength
ASTM D149
12 (kV/mm)
Density
Flammability
Operating Temperature Range
ASTM D6111
UL94
Short Term (Hours-Days)
Long Term (Weeks-Months)
2.1 (g/cm3)
V-0
-40°C to 130°C
-40°C to 110°C
Methods listed as ASTM are tested in accordance with the ASTM method noted. Sample thickness are 2-8mm. Sample size is
33mmφ. Pressure condition is fixed at 200kPa, with thickness control.
*2
Test results are based on a 6mm thickness sample. Sample tested to soft layer side of sample pad.
*1
3M™ Thermally Conductive Acrylic Interface Pad 5590H
Heat Resistance *
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes. Final product specifications and testing methods will be outlined in the product’s Certificate of Analysis
(COA) that is shipped with the commercialized product. This value is a measured value, not a guaranteed value.
As tested on 3M™ Thermally Conductive Acrylic Interface Pad 5590H
Duration (hrs)
Thermal conductivity (W/m-K)
Hardness (Asker C)
Appearance
Initial
3.0
30
-
1000
3.0
33
No effect
2000
3.0
34
No effect
*Note1: Aged by dwelling at 110℃ in high temperature chamber.
*Note2: Thermal conductivity for aging tested using the 3M Method.
Storage and Shelf Life
The shelf life of 3M™ Thermally Conductive Acrylic Interface Pad 5590H is 24 months from the date of manufacture
when stored in the original packaging materials and stored at 21°C (70°F) and 50% relative humidity.
Certificate of Analysis (COA)
The 3M Certificate of Analysis (COA) for this product is established when the product is manufactured and deemed
commercially available from 3M. The COA contains the 3M test methods, specifications limits and test results for the
product’s performance attributes that the product will be supplied against. Contact your local 3M representative for
this product’s COA.
3M™ Thermally Conductive Acrylic Interface Pad 5590H
Regulatory: For regulatory information about this product, contact your 3M representative.
Technical Information: The technical information, recommendations and other statements contained in this document are based
upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M
product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is
solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s
method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product
packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M
ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If
the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M
product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,
negligence or strict liability.
Electronics Materials Solutions Division
3M Center, Building 224-3N-11
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
3M is a trademark of 3M Company.
Please recycle.
©3M 2020. All rights reserved.
60-5005-0122-0
8.3MM-25MM-25-5590H-05 价格&库存
很抱歉,暂时无法提供与“8.3MM-25MM-25-5590H-05”相匹配的价格&库存,您可以联系我们找货
免费人工找货