3M™ 4-Wall, Tripolarized Header
.050″ × .100″ Latch/Ejector, Right Angle, 4 Rows of Solder Tails
•
•
•
•
•
•
•
•
810 Series
Tripolarization to mating socket
50 mil × 100 mil halves the connector length
Latch and eject for rugged high performance applications
4 row tail design
High temperature plastic
Four-wall shroud provides contact protection
Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100
See the Regulatory Information Appendix (RIA) in the
“RoHS compliance” section of www.3Mconnector.com
for compliance information
TS-0334-B
Sheet 1 of 3
Physical
U
E
D
Date Modified: June 15, 2012
Insulator:
Material: High Temperature Plastic (LCP)
Contact:
Plating:
100 µ" [2.54 mm] Nickel
30 µ" [0.76 mm] Gold
See Ordering Information
e3 (ref JESD97)
Marking: 3M Logo, Part Number and Orientation Triangle
C
O
Underplating:
Wiping Area:
Solder Tails:
Terminal Finish Indicator:
N
T
Material: Copper Alloy
IN
Flammability: UL 94V-0
Color: Black (RB Plating only) or Natural
IS
Electrical
D
Current Rating: 0.5 A
Insulation Resistance: > 1 × 109 Ω at 500 VDC
Withstanding Voltage: 500 VRMS at Sea Level
Environmental
Operating Temperature Rating: -55°C to +105°C
Process Rating: Maximum 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050″ × .100″ Latch/Ejector, Right Angle, 4 Rows of Solder Tails
810 Series
Table 1
C
B
B
C
C
X ..015
.015 .015
X ..015
X [0.38]
[0.38][0.38]
X [0.38]
.092
.092
[2.34]
[2.34]
1
See See
NoteNote
1
Position
2 2
Position
Position 1
Position 1
.100 Ref
.100 Ref
[2.54]
[2.54]
.050 Typ
.050 Typ
[1.27]
[1.27]
.015 X ..015
X ..015
[0.38].015
X [0.38]
.310
.310
[7.87]
[0.38] X [0.38]
D
Short Latch
D
Short Latch
Position 1
Orientation
Position 1
Triangle
Orientation
Triangle
.165 ± .010
[4.19]
.165 ± .010
Long Latch
Inch
[Imm]
Tolerance Unless Noted
.0
.00
.000
±.1
±.01
±.005
1.060
[26.92]
0.722
[18.34]
0.500
[12.70]
1.671
[42.44]
1.842
[46.79]
026
1.210
[30.73]
0.872
[22.15]
0.650
[16.51]
1.821
[46.25]
1.992
[50.60]
036
1.460
[37.08]
1.122
[28.50]
0.900
[22.86]
2.071
[52.60]
2.242
[56.95]
040
1.560
[39.62]
1.222
[31.04]
1.000
[25.40]
2.171
[55.14]
2.342
[59.49]
050
1.810
[45.97]
1.472
[37.39]
1.250
[31.75]
2.421
[61.49]
2.592
[65.84]
060
2.060
[52.32]
1.722
[43.74]
1.500
[38.10]
2.671
[67.84]
2.842
[72.19]
068
2.260
[57.40]
1.922
[48.82]
1.700
[43.18]
2.871
[72.92]
3.042
[77.27]
080
2.560
[65.02]
2.222
[56.44]
2.000
[50.80]
3.171
[80.54]
3.342
[84.89]
100
3.060
[77.72]
2.722
[69.14]
2.500
[63.50]
3.671
[93.24]
3.842
[97.59]
.015
[0.38]
.265
[6.73]
.405
[10.29]
.015
[0.38]
.020 [0.51]
.122 ± .010
[3.10]
.098 ± .010
[2.49]
.120 Ref
[3.05]
.075
[1.90]
.105
[2.67]
.378
[9.60]
.075
[1.90]
.107 ± .010
[2.72]
.107 ± .010
.083 ± .010[2.72]
.098 ± .010 [2.11]
[2.49]
.083 ± .010
[2.11]
PTH Right Angle Header, 4 Rows of Solder Tails
81XXX - MX0203 - XX
Contact Quantity
(See Table 1)
Ejector/Latch System:
0 = None
5 = With Short Ejectors Installe
6 = With Long Ejector Latches Installed
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
[2.95]
.105
[2.67]
.265
[6.73]
.122 ± .010
.020 [0.51]
[3.10]
[ ] Dimensions for Reference Only
3
2 X Ø .116
[2.95]2 X Ø .116
.120 Ref
[3.05]
Notes:
1. This polarization bump does not exist on the 20 position header.
2. Recommended to be mated to the .050" X .100" Wiremount Socket 820 Series.
Ordering Information
[3.56]
.378
[9.60]
D
Inch
IS
C
O
.620 Ref
[15.75]
020
[21.03]
.405
[10.29]
.620 Ref
[15.75]
D Long
(Ref.)
.828 Ref
[21.03] .828 Ref
N
T
[11.18]
D Short
(Ref.)
IN
[4.19]
C
.140 ± .010
[3.56] .140 ± .010
Long Latch
.440 ± .010
[11.18]
.440 ± .010
B
U
E
[7.87]
A
D
A
A
Dimensions
Contact
Quantity
Plating suffix:
blank = Tin lead tails
(RIA E3 & C2 apply)
RB = Matte tin tails
(RIA E1 & C1 apply)
Ejector Latch
Long
3505-28 (natural)
3505-28B (black)
Short
3505-29 (natural)
3505-29B (black)
TS-0334-B
Sheet 2 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall, Tripolarized Header
.050″ × .100″ Latch/Ejector, Right Angle, 4 Rows of Solder Tails
810 Series
Table 2
Recommended Mounting Hole Pattern
for Even Number of Contacts/Rows
Ejector Latches
Dimension E Min
None
.575 [14.61]
Long
1.010 [25.65]
Short
.885 [22.48]
(shown for mounting side of PC Baord)
C ± .002
E
.025 ± .003 Typ
[0.64]
.050 ± .002 Typ
[1.27]
Tolerance Noncumulative
Edge of Board
N
T
IN
U
E
D
.305 to .355
[7.75] [9.02]
Position 1
Position 2
O
2X Ø .109 ± .002
[2.77]
Ø .025 ± .003 Typ
[0.64]
C
(See Note 3)
.075 ± .003 Typ
[1.90]
.120 ± .003
[3.05]
IS
D
.225 ± .003
[5.72]
Recommended Mounting Hole Pattern
for Odd Number of Contacts/Row
(Shown for mounting side of PC Board)
Position 2
Position 1
Notes:
1. In order to facilitate flow soldering, it is recommended that ejector latches be installed after the soldering process.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
TS-0334-B
Sheet 3 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
D
U
E
IN
N
T
O
C
Important Notice
IS
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
D
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within
the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product,
regardless of the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
很抱歉,暂时无法提供与“81100-M00203-RB”相匹配的价格&库存,您可以联系我们找货
免费人工找货