Communication Markets Division
3M™ SLiC™ Aerial Closures and Terminals
The Network of Networks
Reliable
Protection
and Easy
Access
3M™ SLiC™ Closures and
Terminals for Copper Networks
Copper is the foundation of your network, now and for the foreseeable
future. It is your key to provide quality service to both new and existing
customers.
In the face of rising costs and increased customer demands, the proper
protection and upkeep of your outside plant architecture is crucial–at the
regional level, in the neighborhood and at the last mile.
3M™ SLiC™ Closures
The integrity of your aerial network plays a critical role in delivering
the bandwidth and uncompromised triple play service your customers
want. You need cutting-edge reliability, accessibility and expandability
as never before.
For the last 20 years, 3M SLiC closures and terminals have protected
aerial networks, globally, in more than 30 different countries.
3M™ SLiC™ Terminals 319, 328, 530
Features and Benefits
Features and Benefits
One-piece construction
Provides easy installation; no loose parts
Double walled, molded construction
Resists breaking or cracking
Interlocking ends
Extendible for long sheath openings
Hanger/bonding system
No external or additional bonding material required
Quick release latch
Easy re-entry
Attached sheath retention (SR) bracket (only for rigid bond)
Protects cable sheath pull-out or movement
Rubber and spiral end seals
One size fits multiple cable configurations
One-piece
construction
with no loose parts
Free-breathing Aerial Closures
3M™ SLiC™ Closures and Terminals are free-breathing, meaning they are purposely
built to allow for free air circulation of ambient outdoor air through the splice,
allowing condensation to drain away. At the same time, your
connections are protected from UV sunlight, animals and
weather.
3M SLiC Closures are double-wall molded,
single-piece closures that are easily installed
in construction or maintenance situations.
The one-piece construction permits complete
splice access after placement without removal
of the closure or bonding from the cables. All
components attach to the closure, so there are no
parts to lose.
Available in seven sizes that can accommodate splice bundles from 2.2
inches to 9.6 inches, the SLiC closure can be easily extended. Take one or more
additional (same size) closures, cut them in half and connect to the left or right side
of your existing closures via the interlocking ends. Because of these interlocking
ends, the 3M SLiC Closure (2.6x29, 3.6x33, 5.6x33, 7.6x33 models) can expand to
meet virtually any size sheath opening without a need to stock special kits.
End Seals for the 3M™ SLiC™ Aerial Closures
and Terminals
The 3M™ SLiC™ Aerial Closures and Terminals are offered with two types of end
seals. Both options ensure a snug fit on the cables and virtually eliminate the need
for drip collars.
• 3M SLiC Rubber End Seal (RES) – These are offered in one-, two- and threeport configurations and can accommodate cables ranging from 0.5 to 3.8 inches.
They can be applied in new construction by measuring the cable and cutting
the appropriate ring. In the case of existing cables, slit the end seal from outside
3M™ SLiC™ Rubber End Seals for the 3M™ SLiC™ Aerial
Closures and Terminals
and tear out the center section. Additional drop can be added by puncturing the
smaller circles in the front side of the end seal.
• 3M SLiC Spiral End Seal (SES) – These are offered in three-, four- or five-port
configurations based on diameter. End seals can be used in new construction or
with existing cables by simply removing the right-sized plugs. The cable range is
molded in the end seal.
3M™ SLiC™ Spiral End Seals for the 3M™ SLiC™
Aerial Closures and Terminals
The choice
is
yours
3M™ SLiC™ Aerial Closures with Floating Bond and Rubber End Seal
SLIC-2.2X19
SLIC-2.6X29
SLIC-3.6X19-FB SLIC-3.6X33
SLIC-5.6X33
SLIC-7.6X33
SLIC-9.6X36
Max. splice opening
14”
17”
14”
21”
21”
21”
25”
Max. splice bundle
diameter
2.2”
2.6”
3.6”
3.6”
5.6”
7.6”
9.6”
Max. modular
pair count
100
(26 or 24 AWG)
0.4 or 0.5
200
(26 or 24 AWG)
0.4 or 0.5
200
(26 or 24 AWG)
0.4 or 0.5
400
(26 or 24 AWG)
0.4 or 0.5
1200
(26 AWG)
0.4
2400
(26 AWG)
0.4
3600
(26 AWG)
0.4
Max. discrete
pair count
50
100
100
200
400
900
1200
End seals included
(2) double port
(2) double port
(2) triple port
(2) triple port
(2) triple port
(2) triple port
(2) triple port
1 Port end seal
diameter port #1
NA
NA
NA
NA
NA
NA
NA
2 Port end seal
diameter port #1
0.2-1.0”
0.2-1.0”
NA
NA
NA
NA
NA
2 Port end seal
diameter port #2
0.2-0.6”
0.2-0.6”
NA
NA
NA
NA
NA
3 Port end seal
diameter port #1
NA
NA
0.2-1.6”
0.2-1.6”
0.6-2.2”
1.4-3.8”
1.4-3.8”
3 Port end seal
diameter port #2
NA
NA
0.2-1.0”
0.2-1.0”
0.2-1.4”
0.6-1.8”
0.6-1.8”
3 Port end seal
diameter port #3
NA
NA
0.2-1.0”
0.2-1.0”
0.2-1.4”
0.6-1.8”
0.6-1.8”
Extendable
No
Yes
No
Yes
Yes
Yes
No
3M ID
80-6104-1494-0 80-6104-1258-9 80-6104-6680-4 80-6104-1257-1
3M™ SLiC™ Aerial Closures with Sheath Retention
Rubber End Seal
80-6104-1256-3 80-6104-1255-5 80-6105-8169-8
3M™ SLiC™ Aerial Closures with
Terminal Brackets and Rubber End Seal
SLIC-3.6X33-SR/RES
SLIC-5.6X33-SR/RES
SLIC-3.6X19-TB/RES
Max. splice opening
21"
21"
21"
Max. splice bundle diameter
3.6"
5.6"
3.6"
Max. modular pair count
400 (26 or 24 AWG)
0.4 or 0.5
1200 (26 AWG)
0.4
NA
Max. discrete pair count
200
600
NA
End seals included
(2) triple port
(2) four port
(2) triple port
Bond assembly model number
4462
4462
NA
3 Port end seal diameter port #1
1.6"
0.2-1.6"
0.2-1.6"
3 Port end seal diameter port #2
0.2-1.0"
0.2-1.0"
0.2-1.0"
3 Port end seal diameter port #3
0.2-1.0"
0.2-1.0"
0.2-1.0"
Extendable
Yes
Yes
Yes
3M ID
80-6113-1049-3
80-6113-1051-9
80-6113-8179-1
3M™ SLiC™ Closures with Floating Bond and Spiral End Seal
SLIC-2.2X19SES
SLIC-2.6X29SES
SLIC-3.6X19SES
SLIC-3.6X33SES
SLIC-5.6X33SES
SLIC-7.6X33SES
SLIC-9.6X36SES
Max. splice opening
14"
17"
14"
21"
21"
21"
25"
Max. splice bundle
diameter
2.2"
2.6"
3.6"
3.6"
5.6"
7.6"
9.6"
Max. modular pair
count
100
(26 or 24 AWG)
0.4 or 0.5
200
(26 or 24 AWG)
0.4 or 0.5
200
(26 or 24 AWG)
0.4 or 0.5
400
(26 or 24 AWG)
0.4 or 0.5
1200
(26 AWG) 0.4
2400
(26 AWG) 0.4
3600
(26 AWG) 0.4
Max. discrete pair
count
50
100
100
200
400
900
1200
End seals included
(2) double port
(2) double port
(2) triple port
(2) four port
(2) five port
(2) five port
End seal diameter
range port #1
0.8-1.6"
0.8-1.6"
0.8-2.6"
0.8-2.6"
1.2-3.0"
1.5-3.8"
1.5-3.8"
End seal diameter
range port #2
0.5-1.0"
0.5-1.0"
0.5-1.0"
0.5-1.0"
0.8-1.4"
1.2-1.8"
1.2-1.8"
End seal diameter
range port #3
0.5-1.0"
0.5-1.0"
0.5-1.0"
0.5-1.0"
1.4-2.0"
0.5-1.2"
0.5-1.2"
End seal diameter
range port #4
NA
NA
NA
NA
0.5-1.2"
1.8-2.4"
1.8-2.4"
End seal diameter
range port #5
NA
NA
NA
NA
NA
0.5-1.2"
0.5-1.2"
Extendable
No
Yes
No
Yes
Yes
Yes
No
3M ID
80-61075998-9
80-61075999-7
80-61116678-8
80-61076000-3
80-61076001-1
80-61076002-9
80-61076003-7
3M™ SLiC™ Aerial Closures with Rigid Bond/Sheath Retention and Spiral End Seal
SLIC-2.2X19-SR/
SES
SLIC-2.6X29-SR/
SES
SLIC-3.6X33-SR/
SES
SLIC-5.6X33-SR/
SES
SLIC-7.6X33-SR/
SES
SLIC-9.6X36-SR/
SES
Max. splice opening
14"
17"
21"
21"
21"
25"
Max. splice bundle
diameter
2.2"
2.6"
3.6"
5.6"
7.6"
9.6"
Max. modular pair
count
100
(26 or 24 AWG)
0.4 or 0.5
200
(26 or 24 AWG)
0.4 or 0.5
400
(26 or 24 AWG)
0.4 or 0.5
1200
(26 AWG)
0.4
2400
(26 AWG)
0.4
3600
(26 AWG)
0.4
Max. discrete pair
count
50
100
200
400
900
1200
End seals included
(2) double port
(2) double port
(2) triple port
(2) four port
(2) five port
(2) five port
End seal diameter
range port #1
0.8-1.6"
0.8-1.6"
0.8-2.6"
1.2-3.0"
1.5-3.8"
1.5-3.8"
End seal diameter
range port #2
0.5-1.0"
0.5-1.0"
0.5-1.0"
0.8-1.4"
1.2-1.8"
1.2-1.8"
End seal diameter
range port #3
0.5-1.0"
0.5-1.0"
0.5-1.0"
1.4-2.0"
0.5-1.2"
0.5-1.2"
End seal diameter
range port #4
0.5-1.0"
0.5-1.0"
0.5-1.0"
0.5-1.2"
1.8-2.4"
1.8-2.4"
End seal diameter
range port #5
NA
NA
NA
0.5-1.0"
0.5-1.2"
0.5-1.2"
Extendable
No
Yes
Yes
Yes
Yes
No
3M ID
80-6107-6010-2
80-6107-6011-0
80-6107-6012-8
80-6107-6013-6
80-6107-6014-4
80-6107-6015-1
3M™ SLiC™ Aerial Closures with Shield Bond Assembly 4460S/4462 and Rubber End Seal
SLIC-2.2X194460S
SLIC-2.2X19-BA
SLIC-2.6X294460S
SLIC-2.6X29-BA
SLIC-3.6X334460S
SLIC-3.6X33-BA
SLIC-5.6X334460S
SLIC-5.6X33-BA
SLIC-7.6X334460S
SLIC-7.6X33-BA
SLIC-9.6X36-BA
Max. splice opening
14"
17"
21"
21"
21"
25"
Max. splice bundle
diameter
Max. modular
pair count
2.2"
2.6"
3.6"
5.6"
7.6"
9.6"
100
(26 or 24 AWG)
0.4 or 0.5
50
200
(26 or 24 AWG)
0.4 or 0.5
100
400
(26 or 24 AWG)
0.4 or 0.5
200
1200
(26 AWG)
0.4
400
2400
(26 AWG)
0.4
900
3600
(26 AWG)
0.4
1200
(2) double port
(2) double port
4460S
4460S
(1) double port/
(1) triple port
4460S
(1) double port/
(1) triple port
4460S
(1) double port/
(1) triple port
4460S
(1) double port/
(1) triple port
4462
BA version uses
4462
BA version uses
4462
BA version uses
4462
BA version uses
4462
BA version uses
4462
NA
NA
NA
NA
NA
NA
NA
0.2-1.0"
0.2-1.0"
0.2-2.0"
0.8-2.2"
1.6-3.2"
1.6-3.2"
0.2-0.6"
0.2-0.6"
0.2-0.6"
0.2-2.2"
0.2-3.2"
0.2-3.2"
NA
NA
0.2-1.6"
0.6-2.2"
1.4-3.8"
1.4-3.8"
NA
NA
0.2-1.0"
0.2-1.4"
0.6-1.8"
0.6-1.8"
Max. discrete
pair count
End seals included
Bond assembly (BA)
model number
Bond assembly
model number
(BA Version)
1 Port end seal
diameter port #1
2 Port end seal
diameter port #1
2 Port end seal
diameter port #2
3 Port end seal
diameter port #1
3 Port end seal
diameter port #2
3 Port end seal
diameter port #3
Extendable
NA
NA
0.2-1.0"
0.2-1.4"
0.6-1.8"
0.6-1.8"
No
Yes
Yes
Yes
Yes
No
3M ID
80-6105-7892-6
80-6105-7893-4
80-6105-7894-2
80-6105-7895-9
80-6105-7896-7
80-6105-8170-6
3M ID (BA Version)
80-6105-7831-4
80-6105-7832-2
80-6105-7833-0
80-6104-1597-0
80-6104-1598-8
NA
3M™ SLiC™ Aerial Closures with Shield Bond Assembly 4462 and Spiral End Seal
SLIC-2.2X19-BA/
SES
SLIC-2.6X29-BA/
SES
SLIC-3.6X19-BA/
SES
SLIC-5.6X33-BA/
SES
SLIC-7.6X33-BA/
SES
SLIC-9.6X36-BA/
SES
Max. splice opening
14"
17"
21"
21"
21"
25"
Max. splice bundle
diameter
2.2"
2.6"
3.6"
5.6"
7.6"
9.6"
Max. modular
pair count
100
(26 or 24 AWG)
0.4 or 0.5
200
(26 or 24 AWG)
0.4 or 0.5
400
(26 or 24 AWG)
0.4 or 0.5
1200
(26 AWG)
0.4
2400
(26 AWG)
0.4
3600
(26 AWG)
0.4
Max. discrete
pair count
50
100
200
400
900
1200
End seals included
(2) double port
(2) double port
(2) triple port
(2) four port
(2) five port
(2) five port
Bond assembly (BA)
model number
4462
4462
4462
4462
4462
4462
End seal diameter
range port #1
0.8-1.6"
0.8-1.6"
0.8-2.6"
1.2-3.0"
1.5-3.8"
1.5-3.8"
End seal diameter
range port #2
0.5-1.0"
0.5-1.0"
0.5-1.0"
0.8-1.4"
1.2-1.8"
1.2-1.8"
End seal diameter
range port #3
0.5-1.0"
0.5-1.0"
0.5-1.0"
1.4-2.0"
0.5-1.2"
0.5-1.2"
End seal diameter
range port #4
NA
NA
NA
0.5-1.2"
1.8-2.4"
1.8-2.4"
End seal diameter
range port #5
NA
NA
NA
NA
0.5-1.2"
0.5-1.2"
Extendable
No
Yes
Yes
Yes
Yes
No
3M ID
80-6107-6004-5
80-6107-6005-2
80-6107-6679-6
80-6107-6007-8
80-6107-6008-6
80-6107-6009-4
Terminals
3M™ SLiC™ Aerial Terminals are distribution terminals and closures contained within a lightweight, double-walled plastic
housing. All three sizes of terminals are offered with rubber end seal (RES) or spiral end seal (SES) versions to ensure a snug fit
on cables, virtually eliminating the need for drip collars. The 3M SLiC terminal with spiral end seals comes packaged with fourport end seals.
The interlocking ends of this SLiC terminal can be extended to accommodate the splice opening by cutting a standard 3.6x33
(or) 5.6x33 closure in half. Each respective half can be used to extend the terminal to the left or the right.
3M Terminal Blocks
The 3M™ SLiC™ Aerial Terminal system won’t block your creativity. You can build your system in 5-, 10- or 25-pair blocks, or
build it one pair at a time.
• 3M™ Multi-Pair Terminating System ATS/TR Dual IDC Terminal Blocks (18-24AWG)
• 3M™ Termination Module MX2000 Single-Pair Terminal Blocks ( 18-24AWG)
• 3M™ Quick Connect System (QCS) 2810 Multi-Pair Blocks (22-24AWG)
3M™ Multi-Pair Terminating System ATS/TR Dual IDC
Terminal Blocks Family
3M™ Quick Connect System (QCS) 2810
3M™ Termination Module MX2000 Single-Pair Terminal Block
3M™ SLiC™ Aerial Terminals 319 with Spiral End Seals
319-MT-DIN/MX/SES
319-MTPI/MX/SES
319-MX-10-SES
319-PI-10-TR/SES
Terminal block pair count
provided
Empty (for use with
MX2000 with/without
protection)
Empty (for use with ATS/TR
and MX2000 blocks with/
without protection)
10-pair MX2000 without
protection
10-pair ATS block
Terminal block max. pair
count capability
10 pair
10 pair
10 pair
10 pair
Connection type
IDC
IDC
IDC
IDC
Block type
NA
NA
Single pair
Multi pair
Max. incoming cable ports
4
4
4
4
Max. outgoing cable ports
4
4
4
4
End seal diameter range
0.5-2.6"
0.5-2.6"
0.5-2.6"
0.5-2.6"
3M ID
80-6113-2152-4
80-6113-1771-2
80-6113-1775-3
80-6113-1773-8
3M™ SLiC™ Aerial Terminals 319 with Rubber End Seals
319-MTPI/MX/RES
319-PI-5-TR/RES
319-PI-10-TR/RES
Terminal block pair count provided
Empty (for use with ATS/TR and
MX2000 blocks with/without
protection)
5-pair ATS block
10-pair ATS block
Terminal block max. pair count
capability
10 pair
10 pair
10 pair
Connection type
IDC
IDC
IDC
Max. incoming cable ports
1
1
1
Max. outgoing cable ports
1
1
1
End seal diameter range
0.2-2.6"
0.2-2.6"
0.2-2.6"
3M ID
80-6113-1770-4
80-6113-1950-2
80-6113-1772-0
3M™ SLiC™ Aerial Terminals 328 with Rubber End Seals
328-MT
328-MTA/RES
328-MTPI-TR/
RES
328-PI-10-TR/
RES
328-PI-20-SR/
RES
328-PI-25-TR/
RES
328-PI-50-TR/
RES
Terminal block
pair count
provided
Empty
Empty
Empty (for use
with ATS block)
10-pair ATS
block
20-pair ATS
block
25-pair ATS
block
50-pair ATS
block
Terminal block
max. pair count
capability
25 pair
25 pair
25 pair
25 pair
25 pair
25 pair
50 pair
Connection type
Binding Post
IDC
IDC
IDC
IDC
IDC
IDC
Sheath
retention
No
No
No
No
Yes
No
No
Max. incoming
cable ports
1
1
1
1
1
1
1
Max. outgoing
cable ports
1
1
1
1
3
1
1
End seal
diameter range
0.2-2.6"
0.2-2.6"
0.2-2.6"
0.2-2.6"
0.2-2.6"
0.2-2.6"
0.2-2.6"
3M ID
80-6107-4688-7
80-6113-2180-5
80-6113-1217-6
80-6113-0396-9
80-6113-1044-4
80-6113-0397-7
80-6113-0399-3
3M™ SLiC™ Aerial Terminals 328 with Sprial End Seals
328-MT/MX/
SES
328-MT/SES
328-MTA/SES
328-MTPITR/SES
328-PI-5-TR/ 328-PI-10SES
TR/SES
328-PI-25TR/SES
328-PI-50TR/SES
Terminal block
pair count
provided
Empty (for
use with
MX2000 with
and without
protection)
Empty
Empty
Empty (for
use with ATS
block)
5-pair ATS
block
10-pair ATS
block
25-pair ATS
block
50-pair ATS
block
Terminal block
max. pair count
capability
25 pair
25 pair
25 pair
25 pair
25 pair
25 pair
25 pair
50 pair
Connection type
IDC
Binding Post
IDC
IDC
IDC
IDC
IDC
IDC
Sheath retention
No
No
No
No
No
No
No
No
Max. incoming
cable ports
3
3
3
3
3
3
3
3
Max. outgoing
cable ports
3
3
3
3
3
3
3
3
End seal
diameter range
0.5-2.6"
0.5-2.6"
0.5-2.6"
0.5-2.6"
0.5-2.6"
0.5-2.6"
0.5-2.6"
0.5-2.6"
3M ID
80-61132386-8
80-61076034-2
80-61136079-7
80-61135692-0
80-61130703-6
80-61130700-2
80-61130702-8
80-61130704-4
3M™ SLiC™ Aerial Terminals 530 with Spiral End Seals
530-MT/SES
530-MTA/SES
530-MTPI-TR/
SES
Terminal block pair
count provided
Empty
Empty
Terminal block max.
pair count capability
25 pair
25 pair
530-PI-5-TR/
SES
530-PI-10-TR/
SES
530-PI-25-TR/
SES
530-PI-50-TR/
SES
Empty (for use 5-pair ATS
with ATS block) block
10-pair ATS
block
25-pair ATS
block
50-pair ATS
block
25 pair
25 pair
25 pair
50 pair
25 pair
Connection type
Binding Post
IDC
IDC
IDC
IDC
IDC
IDC
Max. incoming
cable ports
4
4
4
4
4
4
4
Max. outgoing
cable ports
4
4
4
4
4
4
4
End seal diameter
range port #1
1.2-3.0"
1.2-3.0"
1.2-3.0"
1.2-3.0"
1.2-3.0"
1.2-3.0"
1.2-3.0"
End seal diameter
range port #2
0.8-1.4"
0.8-1.4"
0.8-1.4"
0.8-1.4"
0.8-1.4"
0.8-1.4"
0.8-1.4"
End seal diameter
range port #3
1.4-2.0"
1.4-2.0"
1.4-2.0"
1.4-2.0"
1.4-2.0"
1.4-2.0"
1.4-2.0"
End seal diameter
range port #4
0.5-1.2"
0.5-1.2"
0.5-1.2"
0.5-1.2"
0.5-1.2"
0.5-1.2"
0.5-1.2"
3M ID
80-6107-6035-9 80-6107-6078-9 80-6111-5693-8 80-6113-0708-5 80-6113-0705-1 80-6113-0707-7
80-6113-0709-3
3M™ SLiC™ Aerial Terminals 530 with Rubber End Seals
530-MTPI-TR/RES
530-PI-10-TR/RES
530-PI-20-SR/RES
530-PI-25-TR/RES
530-PI-50-TR/RES
Terminal block pair
count provided
Empty (for use with
ATS block)
10-pair ATS block
20-pair ATS block
25-pair ATS block
50-pair ATS block
Terminal block max.
pair count capability
25 pair
25 pair
25 pair
25 pair
50 pair
Connection type
IDC
IDC
IDC
IDC
IDC
Max. incoming
cable ports
1
1
1
1
1
Max. outgoing
cable ports
1
1
3
1
1
End seal
diameter range
0.2-4.0"
0.2-4.0"
0.2-4.0"
0.2-4.0"
0.2-4.0"
3M ID
80-6113-1218-4
80-6113-1220-0
80-6113-1047-7
80-6113-1221-8
80-6113-1222-6
3M™ SLiC™ Stubbed Aerial Terminal
The 3M SLiC Stubbed Aerial Terminals are designed to provide flexibility
to the installer. They offer fixed-count termination for aerial drop wires in
a weatherproof, non-metallic housing.
The stubbed aerial terminals can be installed on the left or right side of an
aerial closure, offered with a 12-foot cable tail. The terminal is offered with
10- or 25-pair 3M™ Multi-Pair Terminating System ATS/TR termination
block or 10-pair 3M™ Termination Module MX2000 Single-Pair Terminal
Block (protected or unprotected). The unprotected version can be upgraded
3M™ SLiC™ Stubbed Aerial Terminal with 3M™ Multi-Pair
Terminating System ATS/TR termination block
by switching the blocks to protected version in the same terminal if needed.
3M™ SLiC™ Stubbed Aerial Terminal with 3M™ SLiC™ Aerial Closure
3M™ SLiC™ Stubbed Aerial Terminal with 3M™ Termination
Module MX2000 unprotected/protected Terminal Block
3M™ SLiC™ Stubbed Aerial Terminals
SAT-MX-10-R
SAT-MXP-10-L
SAT-PI-10-L
SAT-PI-10-R
SAT-PI-25-L
SAT-PI-25-R
Terminal block pair
count provided
10-pair MX2000
block
10-pair MX2000
block with
protection
10-pair ATS/TR
block
10-pair ATS/TR
block
25-pair ATS/TR
block
25-pair ATS/TR
block
Connection type
IDC
IDC
IDC
IDC
IDC
IDC
Cable entry
Right
Left
Left
Right
Left
Right
Protected
No
Yes
No
No
No
No
3M ID
80-6113-2386-8
80-6107-6034-2
80-6113-6079-7
80-6113-5692-0
80-6113-0700-2
80-6113-0702-8
Extension of 3M™ SLiC™ Closures or Terminals
3M SLiC Aerial Closures and Terminals can be extended to cover sheath damage or longer splice opening by simply cutting a
second closure in the middle. Each cut half section will only fit over the similar end of the main closure/terminal body. The 3M
SLiC Closures that can be extended are 2.6x29, 3.6x33, 5.6x33 and 7.6x33.
The 3M SLiC Aerial Terminals 319 and 328 can be extended by cutting the 3.6x33 closure in the middle and attaching it to the
terminal. 3M SLiC Terminal 530 can be extended by using the 5.6x33 closure.
Secure Your Investment
The 3M™ SLiC™ Aerial Closure can be sealed and secured against unauthorized access. This can be done by slitting through the
thin plastic membrane (Fig. 1) and placing a heavy duty cable tie (Fig. 2) or hose clamp (Fig. 3).
The 3M™ SLiC™ Aerial Terminal can also be sealed and secured against unauthorized access by placing a lock or cable tie (Fig. 4).
Figure 1
Figure 2
Figure 3
Figure 4
3M™ SLiC™ Aerial Closures and Terminals Accessories
Product Number/Packaging Info
Description
SLIC-SR-3
3M™ SLiC™ Sheath Retention Kit For
3" Terminals and 2", 3" Closures
Packaging: 10 kits per box
Min. Order: 10 kits
3M ID: 80-6108-6428-4
SLIC-SR-5
Packaging: 10 kits per box
Min. Order: 10 kits
3M ID: 80-6108-6429-2
SLIC-AC-HB1
Packaging: 10 sets per box
Min. Order: 10 set
3M ID: 80-6101-3353-2
SLIC-AC-HB2
Packaging: 10 sets per box
Min. Order: 10 sets
3M ID: 80-6108-4677-8
AC-HB4
Packaging: 2 each
Min. Order: 2 each
3M ID: 80-6113-1470-1
4460-S
Packaging: 100 each per box
Min. Order: 100 each
3M ID: 80-6100-6312-7
4460-DS
Packaging: 100 each per box
Min. Order: 100 each
3M ID: 80-6113-1641-7
4462-SN
Packaging: 500 each per box
Min. Order: 500 each
3M ID: 80-6104-1542-6
4462-SNA
Packaging: 500 each per box
Min. Order: 500 each
3M ID: 80-6105-8211-8
SLIC-2-SES
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6107-6046-6
Sheath Retention Kit adds sheath retention to 3" SLiC terminals and closures.
These are used to restrict the cable movement.
3M™ SLiC™ Sheath Retention Kit For
5" Terminals and 5", 7", 9" Closures
Sheath Retention Kit adds sheath retention to 5" SLiC terminals and closures.
These are used to restrict the cable movement.
3M™ SLiC™ Offset Hanger Bracket
Designed to support and bond the SLiC closures and terminals to the messenger strand
when more than one cable is supported by the messenger.
3M™ SLiC™ Extended Hanger Bracket
Stainless steel aerial offset hanger bracket 3.0" for the SLiC 530 Fiber Terminal Closures,
SLiC 533 & 733 Fiber Closures, and the SLiC Copper Closures and Terminals.
Aerial Offset Hanger Bracket, 4.0"
For overlashing application.
3M™ Scotchlok™ Shield Bond Connector
The 4462-SNA shield bond connector has a longer stud, deepened nuts and an insulating
shoe. Suitable for cable size 100 pair or less.
3M™ Scotchlok™ Shield Bond Connector
The 4460-DS connector is similar to 4460-D shield connector and is supplied with a small
piece of pair saver to aid connector insertion and to protect conductors. This connector is
suitable for a cable size of 100 pair or less.
3M™ Scotchlok™ Shield Bond Connector
The 4462-SN shield bond connector is an improved version of the popular 4462 shield
bond connector, with a longer and stronger stud to easily accommodate two bond braids
(with eyelets).
3M™ Scotchlok™ Shield Bond Connector
The 4462-SNA shield bond connector has a longer stud, deepened nuts and an insulating
shoe.
3M™ SLiC™ Spiral End Seal For 2" Closures
Triple port spiral end seal for 2.6x19 or 2.6x29 closures.
3M™ SLiC™ Aerial Closures and Terminals Accessories
Product Number/Packaging Info
Description
SLIC-3-SES
3M™ SLiC™ Spiral End Seal For
3" Closures and Terminals
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6107-6047-4
SLIC-5-SES
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6107-6048-2
SLIC-7-SES
Packaging: 5 each per box
Min. Order: 5 each
3M ID: 80-6107-6049-0
SLIC-ES/2DC
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6104-1487-4
SLIC-ES/2SC
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6105-8173-0
SLIC-ES/3DC
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6105-8175-5
SLIC-ES/3SC
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6105-8174-8
SLIC-ES/3TC
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6104-1490-8
SLIC-ES/5DC
Packaging: 5 each per box
Min. Order: 5 each
3M ID: 80-6105-7816-5
SLIC-ES/5SC
Packaging: 5 each per box
Min. Order: 5 each
3M ID: 80-6107-7196-8
SLIC-ES/5TC
Packaging: 5 each per box
Min. Order: 5 each
3M ID: 80-6104-1489-0
SLIC-ES/7DC
Packaging: 5 each per box
Min. Order: 5 each
3M ID: 80-6104-1699-4
SLIC-ES/7TC
Packaging: 5 each per box
Min. Order: 5 each
3M ID: 80-6104-1488-2
Triple-port spiral end seal for 3.6x19 and 3.6x33 closures and 319 and 328 terminals..
3M™ SLiC™ Spiral End Seal For 5" Closures & Terminals
Four-port spiral end seal for 5.6x33 closure and 530 terminal.
3M™ SLiC™ Spiral End Seal For 7" Closures
Five-port spiral end seal for 7" and 9" closures.
3M™ SLiC™ Closure Rubber End Seal Double Port
2" double-port rubber end seal for 2.6X19 and 2.6X29 closures.
3M™ SLiC™ Closure Rubber End Seal Single Port
2" single-port rubber end seal for 2.6X19 and 2.6X29 closures.
3M™ SLiC™ Closure Rubber End Seal Double Port
Double-port rubber end seal for 3.6x19 and 3.6x33 closures and 319 and 328 terminals.
3M™ SLiC™ Closure Rubber End Seal Single Port
Single-port rubber end seal for 3.6x19 and 3.6x33 closures and 319 and 328 terminals.
3M™ SLiC™ Closure Rubber End Seal Triple Port
Triple-port rubber end seal for 3.6x19 and 3.6x33 closures and 319 and 328 terminals.
3M™ SLiC™ Closure Rubber End Seal Double Port
Double-port rubber end seal for the 5.6x33 closure and the 530 terminal.
3M™ SLiC™ Closure Rubber End Seal Single Port
Single-port rubber end seal for the 5.6x33 closure and the 530 terminal.
3M™ SLiC™ Closure Rubber End Seal Triple Port
Triple-port rubber end seal for the 5.6x33 closure and the 530 terminal.
3M™ SLiC™ Closure Rubber End Seal Double Port
Double-port rubber end seal. Also fits in a 9" closure for 7.6x33 and 9.6x36 closures.
3M™ SLiC™ Closure Rubber End Seal Triple Port
Triple-port rubber end seal. Also fits in a 9" closure for 7.6x33 and 9.6x36 closures.
3M™ SLiC™ Aerial Closures and Terminals Accessories
Product Number/Packaging Info
Description
SLIC-TB
3M™ SLiC™ Terminal Bracket
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6113-8197-3
3900-A
Terminal bracket for 6-pair Emerson Block. Can be used with 3.6x19, 3.6x33, 5.6x33
and 7.6x33 closures.
3M™ Aerial Service Wire Closure Kit 3900-A
Packaging: 100 each per box
Min. Order: 100 each
3M ID: 80-6107-5739-7
The 3900-A Aerial Service Wire Closure is a free-breathing aerial butt splice for 2 pair
drop-wire applications that can be pole- or wall-mounted. Utilizing 3M Scotchlok™
Connectors UY2 or UR2 connectors the 3900-A provides primary physical protection that
is resistant to UV rays.
SLIC-SACS
3M™ SLiC™ Cable Spacers
Packaging: 100 each per box
Min. Order: 1 box
3M ID: 80-6113-9056-0
SLIC-DCS
Packaging: 10 each per box
Min. Order: 10 each
3M ID: 80-6113-9057-8
SLIC-DLH
Packaging: 100 each per box
Min. Order: 1 box
3M ID: 80-6113-9058-6
These aerial cable spacers are stackable so the desired height can be achieved.
3M™ SLiC™ Cable Strap
Delrin cablestrap in a 50-foot reel.
3M™ SLiC™ Locking Heads
Delrin locking heads to use with Delrin strap.
3M, SLiC and Scotchlok are trademarks of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or
effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 12 months from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated
above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
will not be liable for any loss or damage arising from this 3M product, whether indirect, special, incidental or consequential regardless of the legal theory asserted.
3
Communication Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/426 8688
Fax 800/626 0329
www.3M.com/Telecom
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
80-6113-8637-8
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
328-MT/SES SAT-PI-10-L 319-MTPI/MX/RES 319-MT-DIN/MX/SES 530-MTA/SES SAT-MXP-10-L 530-PI-20SR/RES 530-PI-50-TR/RES 530-PI-25-TR/RES 4462-SN 62-SN 8173 SAT-PI-25-R SAT-MX-10-R 328-MTA/SES
530-PI-10-TR/RES 530-MT/SES 319-PI-10-TR/SES SAT-PI-10-R 328-MT 319-PI-10-TR/RES 328-MTA/RES
MX2000 SAT-PI-25-L