8A26-2030-LJ-SAS

3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage • • • • • • • 8A26/8C26 Series Capable of 6 Gbps per channel data rate Available in 1x1, 1x2, and 1x4 configurations For external cable assembly applications Meets SFF-8086 and SFF-8087 specifications Meets SAS Specification, SAS-2 Multiple cage key options available See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: March 31, 2008  TS-2211-D Sheet 1 of 9 Physical Insulation Material: Flammability: Color: Contact Material: Underplate Plating: Wiping Area Plating: Solder Tails Plating: EMI Guide Cage Frame Material: Frame Plating: Cover Material: Cover Plating: EMI Gasket Material: High Temperature Thermoplastic UL94V-0 Black Copper Alloy 50 μ” min. [ 1.27 μm ] Nickel 30 μ” min. [ 0.76 μm ] Gold 100 μ” min. [ 2.54 μm ] Matte Tin Zinc Alloy 30 μ” min. [ 0.762 μm ] Nickel (RIA El and C1 apply) Stainless Steel 0.25 mm [ 0.010” ] 30 μ” min. [ 0.762 μm ] Nickel Conductive Foam Electrical Connector: Current Rating: Per Contact: 0.5 A Insulation Resistance: 103 MΩ min. Withstanding Voltage: 300 VDC min. for 1 minute Environmental Operating Temperature: -20°C to +85°C (Connector and metal cage) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series Receptacle Component mm [Inch] Tolerance Unless Noted .0 mm .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only Ordering Information 8A26 - 2030-LJ - XX (RIA E1 & C1 apply) blank = Packaged in trays PP = Packaged in trays with mylar for pick-and-place PR = Packaged tape and reel with mylar for pick-and-place TS-2211-D Sheet 2 of 9 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series Receptacle PC Board Component mm [Inch] Tolerance Unless Noted .0 mm .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only TS-2211-D Sheet 3 of 9 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series 1 x 1 EMI Cage Component mm [Inch] Tolerance Unless Noted .0 mm .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only Ordering Information 8C26 - 1X000 Available Key Option Port 1: 2 = single key, pos. 2 4 = single key, pos. 4 6 = single key, pos. 6 A = dual key, pos. 2 & 4 B = dual key, pos. 4 & 6 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ (RIA E1 & C1 apply) TS-2211-D Sheet 4 of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series 1 x 1 EMI Cage PC Board Layout mm [Inch] Tolerance Unless Noted .0 mm Notes: 1. Ground pad for port guide rail. Plate ground pad with immersion silver or gold. 2. See Receptacle PC Board Layout 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only TS-2211-D Sheet 5 of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series 1 x 2 EMI Cage Component mm [Inch] Tolerance Unless Noted .0 mm .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only Ordering Information Available Key Option Port 1& 2: (Left to Right as shown) 2 = single key, pos. 2 4 = single key, pos. 4 6 = single key, pos. 6 A = dual key, pos. 2 & 4 B = dual key, pos. 4 & 6 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 8C26 - 2XX00 (RIA E1 & C1 apply) TS-2211-D Sheet 6 of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series 1 x 2 EMI Cage PC Board Layout mm [Inch] Tolerance Unless Noted .0 mm Notes: 1. Ground pad for port guide rail. Plate ground pad with immersion silver or gold. 2. See Receptacle PC Board Layout 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only TS-2211-D Sheet 7 of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series 1x4 EMI PC Cage Component mm [Inch] Tolerance Unless Noted .0 mm .00 ± .25 ± .15 .000 ± .05 [ ] Dimensions for Reference only Ordering Information Available Key Options Port 1 to 4: (Left to Right as shown) 2 = single key, pos. 2 4 = single key, pos. 4 6 = single key, pos. 6 A = dual key, pos. 2 & 4 B = dual key, pos. 4 & 6 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 8C26 - 4XXXX (RIA E1 & C1 apply) TS-2211-D Sheet 8 of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Mini Serial Attached SCSI (miniSAS) Connector Right Angle Surface Mount Receptacle/Metal Cage 8A26/8C26 Series 1x4 EMI PC Board Layout mm [Inch] Tolerance Unless Noted .0 mm .00 .000 ± .25 ± .15 ± .05 [ ] Dimensions for Reference only Notes 1. Ground pad for port guide rail. Plate ground pad with immersion silver or gold. 2. See Receptacle PC Board Layout 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ TS-2211-D Sheet 9 of 9 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below. RIA-2217A-D Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217A-D Appendix C3: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217A-D 3M is a trademark of 3M Company.