3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
PRODUCT SPECIFICATION
3M High Routability Internal MiniSAS Cable Assembly, Series 8F36
PS-0082 Rev. 01
Page 1 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
Table of Contents
Section Content
Cover page Contents 1. 1.1. Scope Content
Page
1 2 3 3
2. 2.1.
Applicable Documents Commercial Standards, Specifications and Report
3 3
3. 3.1. 3.2. 3.3. 3.4. 3.5.
Requirements Design and Construction Materials Ratings Performance and Test Description Test Requirements and Procedures Summary
3 3 3 4 4 5
PS-0082 Rev. 01
Page 2 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the 3M High-Routability MiniSAS Cable Assemblies, Series 8F36. 2. APPLICABLE DOCUMENTS The following documents form a part of this specification to the extent specified herein. Unless otherwise specified, latest edition of the specification applies. In the event of conflict between requirements of this specification and product drawing, product drawing shall take precedence. 2.1. Commercial standards, specifications and report 2.1.1. 2.1.2. 2.1.3. 2.1.4. EIA-364 SAS2 SFF-8086 SFF-8087
3. REQUIREMENTS 3.1. Design and Construction Product shall be of design, construction and physical dimensions specified on applicable product drawing. 3.2. Materials 3.2.1. Plug overmold Material: High Temperature Thermoplastic Flammability: UL94V-0 Paddlecard Material: FR4 Mating pad underplating: Min 100u” Ni Mating pad finish: Min 30u” Au High-speed Ribbon Twin Ax Cable See related specification PS-0079 for ribbon twin ax cable material information
3.2.2.
3.2.3.
PS-0082 Rev. 01
Page 3 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
3.3. Ratings 3.3.1. 3.3.2. Current rating: 0.5 A/contact Operating temperature: -20 to +80 deg C
3.4. Performance and Test Description Product is designed to meet electrical, mechanical and environmental performance requirements specified in section 3.5. All tests are performed at ambient environmental conditions per EIA-364 unless otherwise specified. The mated boardmount connector used in these tests was the 3M MiniSAS internal right-angle connector, series 8AB36 (found on tech sheet TS-2208). 3.5. Test Requirements and Procedures Summary
PS-0082 Rev. 01
Page 4 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
Test Description
Withstanding voltage
Test Condition ELECTRICAL
300 V DC applied for 1 minute between adjacent signal wires, between signal wire and shield, and between sideband and shield per EIA-364-20 100V applied for 1 minute between adjacent signal wires, between signal wire and shield, and between sideband and shield per EIA-364-21 Measured with 3 meter sample per SFF-8416 sect 8.2.7.3
Requirement
No breakdown; Current leakage < 1 mA
Insulation resistance
< 1000 Megohms
Propagation delay
4.95 ns/m (typical)
Intrapair skew (within pair)
Measured with TDR method using < 10 ps/meter 3 meter samples. Risetime of 40 ps (10-90%). Skew measured at 70 ohm crossing point..
PS-0082 Rev. 01
Page 5 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
SIGNAL INTEGRITY
Impedance, mated cable assembly Risetime of 70 ps (20/80%) 100 +/- 10 ohms
Differential insertion loss, SDD21
1 meter assembly measured over frequency range 50 MHz to 4.5 GHz Half and one meter assemblies measured from 50 MHz to 6 GHz
Meets SAS2 limit line: -6dB up to 4.5 GHz
Differential reflection loss, SDD22
Differential-to-common mode Half and one meter assemblies conversion, SCD21 measured from 50 MHz to 6 GHz
Meets SAS2 limit line: < -10 dB up to 2.075 GHz < -7.9+13.3 x log( f / 3 GHz) between 2.075 and 6 GHz Meets SAS2.1 limit line: < -18 dB up to 6 GHz
Differential to common mode Half and one meter assemblies reflection, SCD22 measured from 50 MHz to 6 GHz
Near End Crosstalk
Meets SAS2 limit line: < -26 dB up to 300 MHz < -12.7+13.3 x log( f / 3 GHz) between 300 MHz and 6 GHz < -10 dB between 4.8 and 6 GHz Meets SAS2 limit line: Half and one meter assemblies measured from 50 MHz to 6 GHz . < -26 dB up to 6 GHz Total NEXT calculated as described in table 52 of SAS2 standard (rev 16)
PS-0082 Rev. 01
Page 6 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
MECHANICAL
Static (one-time) fold Bend Radius: 1.0 mm Bend Types: 45°, 90°,180° (flat fold) Meets signal integrity specifications (impedance, s- parameters) after a onetime 1 mm minimum bend radius fold Product shall meet requirements of applicable product drawing. Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms No physical abnormalities after test. No electrical discontinuity > 1 us. Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms
Critical Dimension Measurement
Measure dimensions specified in applicable product drawing.
Durability
250 cycles Measured according to EIA-36409 Mated connectors tested according to EIA-364-27, Test Condition “H”. Normal duration 11 ms, 30g peak acceleration, ½ sine wave, 3 times each in +/- X, Y, & Z (18 shocks total) Mated connectors tested according to EIA-364-28, Test Condition VII, letter D. Frequency 20 – 500 Hz, 3.10 g RMS, 15 min duration Measured according to EIA-36413
Mechanical Shock
Random Vibration
Removal Force
49 N Maximum
Insertion Force
Measured according to EIA-36413
55.5 N Maximum
PS-0082 Rev. 01
Page 7 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
ENVIRONMENTAL
Aging (flat) 70°C for 500 hours per EIA-36417 method II, test condition A No visual changes and meets signal integrity specifications (impedance, s- parameters). Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms No visual changes and meets signal integrity specifications (impedance, s- parameters). Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms No visual changes and meets signal integrity specifications (impedance, s- parameters). Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms No visual changes and meets signal integrity specifications (impedance, s- parameters). Maximum initial R of 80 milliohms and maximum delta R of 20 milliohms
Aging (folded)
85°C for 1000 hours per EIA-36417 method A condition 2 with 1 mm radius 180° fold.
Humidity
10 cycles (10 days) between 25°C and 65°C at 80% to 100% RH, per EIA-364-31, table 1, test condition B, method III, figure 1. No bias and no sub-cycle. -55°C to +85°C, 10 cycles, 1/2
hour at each temperature extreme, per EIA-364-32, Table 2, Test Condition I
Thermal shock
PS-0082 Rev. 01
Page 8 of 9
3MTM High Routability Internal MiniSAS Cable Assembly, Series 8F36
Electronic Solutions Division 6801 River Place Blvd Austin, TX 78726 http://www.3Mconnector.com Document No. Revision Revised Date Issued Date : PS-0082 : 01 : 04-Aug-2010 : 04-Aug-2010
3M is a Trademark of 3M Company.
Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
Warranty; Limited Remedy; Limited Liability 3M’s product warranty is for one (1) year from the date of manufacture. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal
PS-0082 Rev. 01
Page 9 of 9
