8KH9-0968-0250

8 5 4 3 2 1 NOTES TWIN AXIAL PCI EXPRESS X8 EXTENDER ASSEMBLIES GEN 4.0, 8KH9 SERIES 10.6 1. DIMENSIONS ARE IN MILLIMETERS. 3.7 2. 3M TWIN AXIAL CABLE DESCRIPTION: 30 AWG, SILVER PLATED SIGNAL WIRE IMPEDANCE: 85 5 OHM OVERALL RIBBON WIDTH: 24.90 MM OVERALL RIBBON THICKNESS: 0.75 MM 5.1 6.4 1.1 PCB 1.2 CONN 2.0 PCB 3.0 CABLE 4.0 CABLE 5.0 6.0 STRAIN RELIEF LABEL ADHESIVE SEE ASSEMBLY PART DETAIL QTY 1 POS. A1 1 1 5 81.3 ADHESIVE ENCAPSULANT APPLIED TO END OF EACH CABLE ON BOTH SIDES, 8 PLACES 7. PRODUCT SPECIFICATION: PS-0390. 8. FLAMMABILITY RATING -TWINAX/AUX RIBBONS: UL94 HB HORIZONTAL FLAME TEST FOR INTERNAL WIRING -PCBS: UL94V-0 6 POS. B49 C 6. THIS CABLE CONSTRUCTION HAS A THIN ALUMINUM LAYER AT EACH EDGE. USER SHOULD EVALUATE ITS USE IN THEIR APPLICATION AND, IF NECESSARY, INSULATING TAPE MAY BE APPLIED TO COVER THE ALUMINUM LAYER, AS USER DEEMS APPROPRIATE. 1 AS REQUIRED AS REQUIRED AS REQUIRED 1 D POS. A49 POS. B49 PART LABEL (WRAP AROUND) 3M LOGO 3M PART NO. DATE CODE: WWYY WW = WEEK YY = YEAR ORDERING INFORMATION 8KH9-0968-XXXX 9. PADDLECARD PLATING: 30 " MIN. GOLD PLATING 50 " MIN. NICKEL UNDERPLATING. 10 UNLESS OTHERWISE NOTED, REFERENCES TO INDUSTRY SPECIFICATIONS ARE INTENDED TO INDICATE SUBSTANTIAL COMPLIANCE TO THE MATERIAL ELEMENTS OF THE SPECIFICATION. SUCH REFERENCES SHOULD NOT BE CONSTRUED AS A GUARANTEE OF COMPLIANCE TO ALL REQUIREMENTS IN A GIVEN SPECIFICATION. 6.4 STANDARD LENGTHS DIM. "A" 0250 = [250 MM] 0500 = [500 MM] 5.0 2X 3.7 11.2 NOTE: NON-STANDARD LENGTHS AVAILABLE UPON REQUEST. MAY REQUIRE HIGHER MOQ'S AND LONGER LEAD TIMES. C 25 11 CLOTH TAPE WRAPPED AROUND CABLE RIBBONS AT BACK OF EACH CONNECTOR. ALSO, UP TO TWO ADDITIONAL TAPE PIECES WILL BE WRAPPED AROUND THE TWO CABLE RIBBONS SPACED EQUIDISTANT FROM THE CONNECTOR ENDS AND EACH OTHER, DEPENDING ONASS'Y LENGTH (L): L