8R25-N001

8 7 6 5 4 3 2 1 3MTM Solder Cup D Sub Socket, 8000 Series NOTES 1 POSITION 9 15 25 37 50* STANDARD D C B A [.642] 16.30 [.969] 24.60 [1.508] 38.30 [2.157] 54.80 [2.055] 52.20 B [.984] 25.00 [1.311] 33.30 [2.248] 57.10 [2.500] 63.50 [2.402] 61.00 C [1.213] [1.543] [2.091] [2.732] [2.638] 30.80 39.20 53.10 69.40 67.00 MATERIAL: THERMAL PLASTIC UL94V-0 CONTACTS: COPPER ALLOY SHELL: G3141 SPCC OR EQUIVALENT D [.756] 19.20 [1.091] 27.70 [1.618] 41.10 [2.256] 57.30 [2.169] 55.10 2 PLATING: 50 " NICKEL UNDERPLATE 1 " AU WIPING AREA OR 30 " AU WIPING AREA 100-200 " TIN(BRIGHT TIN)SOLDERTAIL *50 POSITION AVAILABLE IN STANDARD ONLY A PERFORMANCE OPERATION VOLTAGE: 250V MAX. CURRENT: 3A MAX. INSULATION RESISTANCE: 3000 MOhm MIN @ 500VDC WITHSTANDING VOLTAGE: 1000 VAC / MIN. TEMPERATURE RATING: -55 C to 105 C CONTACT RESISTANCE: 15 mOhms MAX. .492 12.50 .311 7.90 .122 3.10 D 3 MATES WITH: 8PXX-X00X 4 SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN "RoHS" COMPLIANCE SECTION OF WWW.3MCONNECTOR.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY) .109 2.77 .112 2.84 .236 6.00 EMI C C .303 7.70 C B A .112 2.84 .492 12.50 C .272 6.90 78-5100-2402-5 .109 2.77 50 POSITION .236 6.00 C B .122 3.10 A B REVISION .059 1.50 DRAWING NUMBER D B D .112 2.84 .602 15.30 .429 10.90 .112 2.84 .109 2.77 .236 6.00 C 46292 MAR 28,2013 SJS ARM CORRECT SHELL MATL 8RXX-X00X B 34516 AUG 29,2011 SJS ARM CHANGE MOHMS TO mOHMS, UPDATE ROHS A 34511 MAY 18,2011 SJS ARM MAY 18, 2011 .224 5.68 A NUMBER OF CONTACTS (SEE TABLE) D DESIGN REFERENCE PLATING 1 - AU FLASH 2 - 30 " AU NEXT ASSEMBLY ACCESS CODES DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE SJS MAY 18,2011 CHKD DATE ARM MAY 18,2011 DIVISION CODE C 3M Center EMI N - STANDARD E - EMI Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. Such references should not be construed as a guarantee of compliance to all requirements in a given specification. 3M ELECTRONIC SOLUTIONS DIVISION INTERCONNET SOLUTIONS http://www.3mconnectors.com 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION, CALL 800-225-5373 DO NOT SCALE DRAWING 1 1 THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 8 7 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 1 .0 .5 .00 .05 .000 .005 ANGLES 1 MN 55144 DRFT MFG DATE APPVL DATE CHKD A 3M COPYRIGHT 2013 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 8RXX-X00X D-SUB SOLDER CUP SOCKET TS-2402 CAGE SIZE NUMBER MODEL 8R DRAWING NO. REV. 78-5100-2402-5 DET. LISTS 1 YES NO C SHT 1 OF 2 8 7 POSITION D 9 15 25 37 50 MOUNTING METHOD FRONT REAR FRONT REAR FRONT REAR FRONT REAR FRONT REAR 6 5 4 A B C D E F G H J .874[22.2] .806[20.5] 1.202[30.5] 1.134[28.8] 1.743[44.3] 1.674[42.5] 2.391[60.7] 2.326[59.1] 2.297[58.3] 2.218[56.3] .437[11.1] .403[10.2] .601[15.3] .567[14.4] .872[22.2] .837[21.3] 1.196[30.4] 1.163[29.5] 1.149[29.2] 1.109[28.2] .984[25.0] .984[25.0] 1.312[33.3] 1.312[33.3] 1.852[47.0] 1.852[47.0] 2.500[63.5] 2.500[63.5] 2.406[61.1] 2.406[61.1] .492[12.5] .492[12.5] .656[16.7] .656[16.7] .926[23.5] .926[23.5] 1.250[31.8] 1.250[31.8] 1.203[30.6] 1.203[30.6] .513[13.0] .449[11.4] .513[13.0] .449[11.4] .513[13.0] .449[11.4] .513[13.0] .449[11.4] .623[15.8] .555[14.1] .257[6.5] .225[5.7] .257[6.5] .225[5.7] .257[6.5] .225[5.7] .257[6.5] .225[5.7] .312[7.9] .278[7.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .120[3.1] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .060[1.5] .083[2.1] .132[3.4] .083[2.1] .132[3.4] .083[2.1] .132[3.4] .083[2.1] .132[3.4] .083[2.1] .132[3.4] 3 2 1 D C C R0.81 MAX TYP A B H J RADIUS TYP G F C 10 D C CUTOUT FOR FRONT MOUNT B DRAWING NUMBER 78-5100-2402-5 FULL RADIUS REVISION E B G D C 46292 MAR 28,2013 SJS ARM CORRECT SHELL MATL C B 34516 AUG 29,2011 SJS ARM CHANGE MOHMS TO mOHMS, UPDATE ROHS CUTOUT FOR REAR MOUNT A 34511 MAY 18,2011 SJS ARM MAY 18, 2011 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE SJS MAY 18,2011 CHKD DATE ARM MAY 18,2011 DIVISION CODE C 3M Center DO NOT SCALE DRAWING 1 1 THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 8 7 6 5 4 3 St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 2 INCHES .0 .00 .000 .0000 MILLIMETERS 0 1 .0 .5 .00 .05 .000 .005 ANGLES 1 MN 55144 DRFT MFG DATE APPVL DATE CHKD A 3M COPYRIGHT 2013 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 8RXX-X00X D-SUB SOLDER CUP SOCKET TS-2402 CAGE SIZE NUMBER MODEL 8R DRAWING NO. REV. 78-5100-2402-5 DET. LISTS 1 YES NO C SHT 2 OF 2