924227-28-17-EU

3M™ Pin Strip Header .100″ and .100″ × .100″ Dual Insulator, Board Stacking 36 sizes (1 to 36) position Standard .025 inch square posts .100 inch spacing between posts Dual insulation Board pin retention feature available See Regulatory Information Appendix (RIA) for chemical compliance information. 1/ 17 • • • • • • 929 Series E D Date Modified: March 8, 2007 Insulation Glass Filled Polyester (PBT) or PCT UL 94V-0 Black Copper Alloy 50 μ″ [ 1.27 μm ] Nickel 10 μ″ [ 0.25 μm ] Gold None Electrical C O N Material: Flammability: Color: Contact Material: Plating Underplating: Wiping Area: Marking: T IN U Physical TS-0817-05 Sheet 1 of 3 IS Current Rating: 2.5 A Insulation Resistance: > 5 × 109Ω at 500 VDC D Withstanding Voltage: 1500 VRMS at Sea Level Environmental -40°C to +105°C Process Rating: 260°C (per J-STD-020C) for PCT insulator parts (PBT insulator version), maximum insulator temperature 191°C (Wave Solder Process Only) Moisture Sensitivity Level: 1 (per J-STD-020C) for PCT insulator parts Temperature Rating: UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pin Strip Header .100″ and .100″ × .100″ Dual Insulator, Board Stacking 4217 4217 Dimensions A B D 24 .238 [6.05] .110 [2.79] .380 [9.65] 28 .235 [5.97] .110 [2.79] .500 [12.70] 4217 32 .240 [6.10] .110 [2.79] .630 [16.00] 6121 01 .100 [2.54] .355 [9.02] .390 [9.91] 6581 01 .100 [2.54] .465 [11.81] .400 [10.16] 6781 01 .100 [2.54] .545 [13.84] .600 [15.24] 6101 01 .100 [2.54] .350 [8.89] .900 [22.86] C See Note One Row .115 [2.92] 2X .05 Max [1.27] (See Note 1) 17 Tail Length Code A ± .008 .050 [1.27] E D .100 [2.54] 1/ Mating Length Code 929 Series .100 [2.54] T IN U D ± .015 B ± .015 .100 Typ [2.54] .115 [2.92] ∅ .040 ± .003 After Plating N .025 Sq Typ [0.64] .060 [1.52] C O [1.02] .100 [2.54] Recommended Hole Pattern Inch IS [mm] Tolerance Unless Noted .0 D Inch Note: C = .10" [2.5] × pin quantity per row. Dimension C is a maximum when the pin strip is cut to length, not when the strip is broken to length. Breaking strips to length not recommended. ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only Ordering Information 9XXXXX-XX-XX-XX Board Retention Feature 2 = None R = Kinked Tails Mating Length Code (See Table) 3M Interconnect Solutions http://www.3M.com/interconnects/ Tail Length Code (See Table) Pin Quantity (01-36) Plating Suffix I = 10μ″ [0.25μm] all over, PBT insulator (RIA E1 & C1 apply) EU = 10μ″ [0.25um] all over, PCT insulator (RIA E1 & C1 apply) TS-0817-05 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Pin Strip Header .100″ and .100″ × .100″ Dual Insulator, Board Stacking Two Row 929 Series Mating Length Code Tail Length Code 4227 4227 Dimensions A B 24 .238 [6.05] .110 [2.79] .380 [9.65] 28 .235 [5.97] .110 [2.79] .500 [12.70] 4227 32 .240 [6.10] .110 [2.79] .630 [16.00] 6122 01 .100 [2.54] .355 [9.02] .390 [9.91] 6582 01 .100 [2.54] .465 [11.81] .400 [10.16] 6782 01 .100 [2.54] .545 [13.84] .600 [15.24] 6102 01 .100 [2.54] .350 [8.89] .900 [22.86] 17 C See Note D 1/ .215 [5.46] A ± .015 T IN U .100 [2.54] .100 [2.54] .060 [1.52] E D 2X .05 Max [1.27] (See Note 1) D ± .008 .100 [2.54] C O D IS .100 [2.54] N .025 Sq Typ [0.64] B ± .015 .100 Typ [2.54] Ø .040 ± .003 After Plating [1.02] Inch [mm] Tolerance Unless Noted .100 [2.54] .0 Inch Recommended Hole Pattern ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only Note: C = .10" [2.5] × pin quantity per row. Dimension C is a maximum when the pin strip is cut to length Breaking dual row strips to length is not recommended. Ordering Information 9XXXXX-XX-XX-XX Board Retention Feature 2 = None R = Kinked Tails Mating Length Code Tail Length Code (See Table) (See Table) 3M Interconnect Solutions http://www.3M.com/interconnects/ Plating Suffix I = 10μ″ [0.25μm] all over, PBT insulator (RIA E1 & C1 apply) EU = 10μ″ [0.25um] all over, PCT insulator (RIA E1 & C1 apply) Pin Code TS-0817-05 (Pins per Row) Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS 17 Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. 1/ Appendix E2: European Union RoHS T IN U E D Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS C O N Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. IS In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS D Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. “RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-B CHINA Appendix C1: China RoHS Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. Appendix C2: China RoHS 17 In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. 20 T IN U E D 1/ Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the product Warranty stated below. IS C O N Name and Content of Hazardous Substances or Elements Important Notice D All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-B © 3M 2007