951101-8622-AR

8 7 6 5 4 3 2 1 NOTES 3MTM PIN STRIP HEADER, 951 SERIES 1. REGULATORY INFORMATION: VISIT 3M.com/regs OR CONTACT YOUR 3M REPRESENTATIVE TO FIND THE RoHS COMPLIANCE STATUS OF THE 3M PART YOU ARE INTERESTED IN. 2MM AND 2MM X 2MM STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. D N = THE NUMBER OF POSITIONS. 3 2 INSULATOR: MATERIAL: FLAMMABILITY: COLOR: CONTACT: MATERIAL: PLATING: UNDER PLATING: WIPING AREA: SOLDER TAILS: MARKINGS: C 2 HIGH TEMP THERMOPLASTIC UL94V-0 BLACK BRASS 50 " [1.27 m] NICKEL-OVERALL GOLD FLASH 40-118 " [1-3 m] ORIENTATION TRIANGLE ELECTRICAL: CURRENT RATING: CONTACT RESISTANCE: INSULATION RESISTANCE: WITHSTANDING VOLTAGE: B DUAL ROW RIGHT ANGLE VERSION 2A < 20m > 1000M 500VRMS 1mA, 60s 2 MECHANICAL: RETENTION FORCE: > 4.5N PER PIN 2 ENVIRONMENTAL: DRAWING NUMBER SINGLE ROW RIGHT ANGLE VERSION C REVISION DUAL ROW STRAIGHT VERSION PHYSICAL: 78-5100-2653-3 SINGLE ROW STRAIGHT VERSION D TEMPERATURE RATING: -55 C TO 125 C HUMIDITY: < 93% AT 40 C RESISTANCE TO SOLDERING HEAT: PBT, 245 C 5 C, 10s B SINGLE ROW SURFACE MOUNT VERSION DUAL ROW SURFACE MOUNT VERSION B 76546 NOV 08,2017 JNC SC JNC TS DRFT CHKD REVISE SHT 4 A 72044 MAR 06,2017 REVISE ELECTRICAL NOTES 3-2-17 REMOVED 2 CONNECTORS DIMENSIONS: INCH [MM] [MM] FOR REF. ONLY DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION PRODUCTION RELEASE REV CASTIGLIONE FEB 23,2015 CHKD DATE DIVISION CODE R 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 8 UL FILE NO: E68080 TOLERANCE - UNLESS NOTED X. .X .XX MM .5 .20 [INCH] .02 .008 [] = DIM. FOR REFERENCE ONLY 4 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE MM [INCH] 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com ISSUE DATE AND DESCRIPTION DATE EMSD DO NOT SCALE DRAWING ECO DRFT 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA FEB 23,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE PIN STRIP HEADER, 2MM X 2MM, STRAIGHT, SMT & RA, SOLDER TAIL CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-2653-3 MODEL 951XXX DET. LISTS 1 YES NO B SHT 1 OF 5 Imaged: B.2 Central Standard Time11/27/2017UTC Offset B A 8 7 6 5 4 3 2 1 3MTM PIN STRIP HEADER, 951 SERIES 2MM AND 2MM X 2MM STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL DIM. "A" D DIM. "A" .079 +.008 -.016 +.20 -.40 D 2.00 DIM. "C" DIM. "B" DIM. "B" .006 DIM. "C" .15 +.008 -.016 +.20 -.40 .157 .020 .079 .006 2.00 0.50 0.15 4.00 .002 0.05 SQ. TYP. DIM. "D" .173 4.40 TYP. DIM. "D" MATE LENGTH .006 .15 .079 .079 .006 2.00 .059 .118 3.00 1.50 .020 0.50 0.15 2.00 .002 .006 0.15 0.05 SQ. TYP. TYP. .173 4.40 TAIL MATE LENGTH C C .059 1.50 .118 3.00 AFTER PLATING TYP. .003 TYP. 0.08 DIM. "B" DIM. "B" .003 .08 .031 RECOMMENDED PC BOARD LAYOUT (VIEWED FROM CONNECTOR SIDE) 0.80 DRAWING NUMBER 2.00 0.08 78-5100-2653-3 .079 TAIL B 0.80 .003 REVISION .031 .003 0.08 AFTER PLATING TYP. .079 B 2.00 .003 B 0.08 DIM. "D" TYP. .003 DIM. "D" .08 B ORDERING INFORMATION STRAIGHT VERSION 76546 NOV 08,2017 A 72044 MAR 06,2017 DRFT CHKD PRODUCTION RELEASE CONTACT QTY. 40 PINS = 1 ROW 80 PINS = 2 ROW DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES REV DIM. DIM. DIM. DIM. "A" "B" "C" "D" TABLE 1 .079 [2.00] .079 [2.00] .079 [2.00] .079 [2.00] SEE NOTE 3 X X X X DO NOT SCALE DRAWING N (N-1) (N/2) (N/2-1) DATE CASTIGLIONE FEB 23,2015 CHKD DATE 4 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE MARKED ONLY 4 ISSUE DATE AND DESCRIPTION DIVISION CODE ALL SURFACES 5 ECO DRFT EMSD 6 TS 3-2-17 REMOVED 2 CONNECTORS DIVISION 7 JNC REVISE ELECTRICAL NOTES A 8 SC REVISE SHT 4 951XXX-8622-AR No. OF ROWS: 1 = 1 ROW 2 = 2 ROW JNC 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA FEB 23,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE PIN STRIP HEADER, 2MM X 2MM, STRAIGHT, SMT & RA, SOLDER TAIL CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-2653-3 MODEL 951XXX DET. LISTS 1 YES NO B SHT 2 OF 5 Imaged: B.2 Central Standard Time11/27/2017UTC Offset RECOMMENDED PC BOARD LAYOUT (VIEWED FROM CONNECTOR SIDE) A 8 7 6 5 4 3 2 1 3MTM PIN STRIP HEADER, 951 SERIES 2MM AND 2MM X 2MM STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL D DIM. "C" +.008 DIM. "A" -.016 DIM. "C" +.20 DIM. "A" -.40 +.008 -.016 D +.20 -.40 .079 2.00 .157 4.00 DIM. "B" DIM. "B" .006 DIM. "D" .15 DIM. "D" .020 .006 .079 .15 2.00 .006 0.15 .002 .079 0.50 2.00 SQ. TYP. .079 0.05 TYP. 2.00 DIM. "F" MATE LENGTH .020 .006 0.50 0.15 .002 0.05 DIM. "F" MATE LENGTH SQ. TYP. TYP. .059 C .059 1.50 .050 1.50 1.27 .031 0.80 2.00 0.08 AFTER PLATING TYP. .003 .010 0.25 .031 .118 .079 3.00 2.00 TAIL TYP. 0.08 .003 0.80 0.08 .003 0.08 AFTER PLATING TYP. .118 3.00 .079 TAIL 2.00 .006 0.15 B .079 1.27 .003 0.25 REVISION .050 C .010 DIM. "B" .079 .003 2.00 .08 .003 DIM. "D" 0.08 DIM. "D" .003 DRAWING NUMBER DIM. "B" 78-5100-2653-3 TYP. .08 RECOMMENDED PC BOARD LAYOUT (VIEWED FROM CONNECTOR SIDE) RECOMMENDED PC BOARD LAYOUT (VIEWED FROM CONNECTOR SIDE) B B 76546 NOV 08,2017 JNC SC JNC TS DRFT CHKD REVISE SHT 4 A ORDERING INFORMATION RIGHT ANGLE VERSION 951XXX-7X22-AR No. OF ROWS: 1 = 1 ROW 2 = 2 ROW A DIM. "F" MATING PIN LENGTH: 6 = .173 [4.40] 7 = .295 [7.50] DIM. DIM. DIM. DIM. "A" "B" "C" "D" TABLE 2 .079 [2.00] .079 [2.00] .079 [2.00] .079 [2.00] SEE NOTE 3 X X X X N (N-1) (N/2) (N/2-1) 3-2-17 REMOVED 2 CONNECTORS PRODUCTION RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES DIVISION DO NOT SCALE DRAWING 4 1 INCHES ALL SURFACES MARKED ONLY 4 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLIONE FEB 23,2015 CHKD DATE 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED MAX SURFACE ROUGHNESS 5 ECO DRFT EMSD SCALE INTERPRET PER ASME Y14.5 - 2009 6 REV DIVISION CODE THIRD ANGLE PROJECTION 7 MAR 06,2017 REVISE ELECTRICAL NOTES CONTACT QTY: 40 PINS = 1 ROW 80 PINS = 2 ROW 8 72044 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA FEB 23,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE PIN STRIP HEADER, 2MM X 2MM, STRAIGHT, SMT & RA, SOLDER TAIL CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-2653-3 MODEL 951XXX DET. LISTS 1 YES NO B SHT 3 OF 5 Imaged: B.2 Central Standard Time11/27/2017UTC Offset B A 8 7 6 5 4 3 2 1 3MTM PIN STRIP HEADER, 951 SERIES 2MM AND 2MM X 2MM STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL DIM. "A" D DIM. "A" DIM. "C" +.008 -.016 DIM. "C" +.20 -.40 +.008 -.016 D +.20 -.40 .157 4.00 .079 DIM. "B" DIM. "B" 2.00 .006 DIM. "D" .15 DIM. "D" OPTIONAL VACUUM CAP .079 2.00 .020 TYP. 0.05 SQ. TYP. .15 .079 2.00 OPTIONAL VACUUM CAP .079 .002 0.50 .006 .157 4.00 2.00 MATE LENGTH TYP. .020 .002 0.50 0.05 .157 4.00 SQ. TYP. MATE LENGTH .059 1.50 .051 .059 .002 1.30 1.50 .102 .217 5.50 2X .039 0.25 .004 1.00 0.10 DIM. "E" 2X OPTIONAL GUIDE POST .039 .003 2.00 .083 2.10 1.00 0.08 5.50 0.08 DIM. "B" DIM. "B" 0.05 0.05 TYP. .276 7.00 .003 .083 0.08 2.10 .003 .002 0.05 .08 2X .047 1.20 RECOMMENDED PC BOARD LAYOUT (VIEWED FROM CONNECTOR SIDE) B .002 .002 TYP. .003 0.25 B .079 TYP. .217 7.00 .010 0.05 TYP. TYP. .276 .15 .002 0.80 0.08 2.60 REVISION 2.00 .003 .006 DRAWING NUMBER .079 .006 >40 POS. .102 DIM. "E" .031 .004