966260-2000-AR-PR

8 TM 3M 7 6 5 4 3 2 1 NOTES THROUGH-BOARD SOCKET, 96X SERIES 1. MATERIAL: PLASTIC: HIGH TEMP LCP, UL94V-0 CONTACT: COPPER ALLOY. 2.54MM X 2.54MM, LOW PROFILE SURFACE MOUNT 2. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY). D 3 C 3 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 4 N = THE NUMBER OF CONTACTS. PHYSICAL: INSULATOR: MATERIAL: FLAMMABILITY: COLOR: CONTACT: MATERIAL: PLATING: UNDER PLATING: WIPING AREA: SOLDER TAILS: DUAL ROW, LOW PROFILE SERFACE MOUNT VERSION 4.57MM TALL BODY "9662XX" 3 D HIGH TEMP THERMOPLASTIC UL94V-0 BLACK COPPER ALLOY 1.27-2.54 m [50-100 "] NICKEL-OVERALL GOLD FLASH 1-3 m [40-118 "] MATTE TIN C ELECTRICAL: CURRENT RATING: 3A INSULATION RESISTANCE: >5 X 108 OHm AT 100VDC WITHSTANDING VOLTAGE: 1000VAC AT 60s 3 MECHANICAL: A 78-5100-2652-5 3 REVISION INSERTION FORCE: < 3N PER PIN EXTRACTION FORCE: > 0.3N PER PIN RETENTION FORCE: > 7N PER PIN ENVIRONMENTAL: PACKING & STORING: METHOD OF PACKING: TAPE AND REEL, OUTER BOX STORING CONDITION: TEMPERATURE OF -10 C TO 40 C BELOW 80% RELATIVE HUMIDITY B B A 72044 MAR 06,2017 JNC TS DRFT CHKD REVISE ELECTRIC, MECHANICAL & ENVIROMENTAL NOTES 2-2-17 REMOVED 4 CONNECTOR DIMENSIONS: MM [INCH] PRODUCTION RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO DATE CASTIGLIONE JAN 12,2015 CHKD DATE DIVISION CODE EMSD MM [INCH] 3MTM ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com TOLERANCE - UNLESS NOTED X. .X .XX MM .5 .20 [INCH] .02 .008 [] = DIM. FOR REFERENCE ONLY 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 8 DO NOT SCALE DRAWING 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 4 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 ISSUE DATE AND DESCRIPTION DRFT 2 MN ANGLES DATE APPVL DATE T. SUNIGA JAN 12,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE THRU-BOARD SKT, 2.54MM X 2.54MM, SURFACE MOUNT .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 55144 MFG CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-2652-5 MODEL 96XX DET. LISTS 1 YES NO A SHT 1 OF 3 Imaged: A.7 3/6/2017 2:46 PM UTC-06:00 3 DRAWING NUMBER TEMPERATURE RATING: -55 C TO 125 C PROCESSING TEMPERATURE: MAX. 260 C (PROFILE PER J-STD-020C) MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) A 8 7 6 5 4 3 2 1 3MTM THROUGH-BOARD SOCKET, 96X SERIES 2.54MM X 2.54MM, LOW PROFILE SURFACE MOUNT ORDERING INFORMATION 9662XX-2000-AR-XX D DIM. "C" DIM. "C" PACKAGING: TP = TUBE WITHOUT CLIP (04 TO 60 POS) PT = TUBE WITH CLIP (10 TO 60 POS) PR = TAPE AND REEL WITH CLIP (10 TO 60 POS) CONTACT QUANTITY: 04-60 .25 .010 PLATING: AR = 1.27 M [50 IN] MIN. NICKEL ALL OVER WIPING AREA: GOLD FLASH SOLDER TAIL AREA: 1-3 M [40-118 IN] MIN. MATTE TIN DIM. "B" .50 .05 .020 D .002 TYP. 5.00 .15 .197 2.54 .100 .006 .15 .006 C C 6.50 1.45 8.00 .256 .057 .315 MATE POINT 4.57 .187 .010 .05 .010 TYP. 4 .002 6.35 .250 .25 DRAWING NUMBER .25 .004 A .10 N40 REVISION .006 .10 .100 .25 .15 .180 2.54 4.75 78-5100-2652-5 OPTIONAL VACUUM CLIP .010 B B 2.54 .040 .08 .059 .004 .002 TYP. TYP. .003 .05 NON-PLATED THRU HOLE TYP. 7.35 .289 2.54 .100 .08 .003 .08 1.00 .003 .039 DIM. "B" DIM. "B" .10 .05 A TYP. TABLE 1 DIM. "A" 2.54 [.100] X (N/2) DIM. "B" 2.54 [.100] X (N/2-1) DIM. "C" 2.54 [.100] X (N/2) +.50 SEE NOTE 3 DRFT CHKD PRODUCTION RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES DIVISION 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLIONE JAN 12,2015 CHKD DATE 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED 4 1 INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MARKED ONLY 4 ECO DRFT EMSD SCALE ALL SURFACES 5 REV DIVISION CODE MAX SURFACE ROUGHNESS 6 TS 2-2-17 REMOVED 4 CONNECTOR .004 TABLE 2 CONTACT QTY. 10 12-16 18-24 26-34 36-44 46-56 58-60 TAPE WIDTH [MM] 24 32 44 56 72 88 104 7 JNC REVISE ELECTRIC, MECHANICAL & ENVIROMENTAL NOTES DO NOT SCALE DRAWING 8 MAR 06,2017 .002 RECOMMENDED PC BOARD LAYOUT (VIEWED FROM COMPONENT SIDE) A 72044 2 MN ANGLES DATE APPVL DATE T. SUNIGA JAN 12,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE THRU-BOARD SKT, 2.54MM X 2.54MM, SURFACE MOUNT .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 55144 MFG CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-2652-5 MODEL 96XX DET. LISTS 1 YES NO A SHT 2 OF 3 Imaged: A.7 3/6/2017 2:46 PM UTC-06:00 1.02 .100 1.50 .10 A 8 7 6 5 4 3 2 1 D D Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C C 78-5100-2652-5 A REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. DRAWING NUMBER Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B A 72044 MAR 06,2017 JNC TS DRFT CHKD REVISE ELECTRIC, MECHANICAL & ENVIROMENTAL NOTES 2-2-17 REMOVED 4 CONNECTOR PRODUCTION RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV ECO DATE CASTIGLIONE JAN 12,2015 CHKD DATE DIVISION CODE EMSD DO NOT SCALE DRAWING 2 1 INCHES INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 8 ISSUE DATE AND DESCRIPTION DRFT 2 MN ANGLES DATE APPVL DATE T. SUNIGA JAN 12,2015 C 3M COPYRIGHT 2017 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE THRU-BOARD SKT, 2.54MM X 2.54MM, SURFACE MOUNT .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 55144 MFG CAGE SIZE DRAWING NO. NUMBER REV. 78-5100-2652-5 MODEL 96XX DET. LISTS 1 YES NO A SHT 3 OF 3 Imaged: A.7 3/6/2017 2:46 PM UTC-06:00 B A