9810-PLM0

8 7 6 5 4 3 2 1 NOTES 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) 1. REGULATORY INFORMATION: VISIT 3M.com/regs 2 ROW CARRIER HOUSING .100" ASSEMBLY HARDWARE 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. * CARRIERS AVAILABLE IN 3M .100" X .100" (2.54MM X 2.54MM) SOCKET. * COMPATIBLE WITH ALL 3M .100" X .100" (2.54MM X 2.54MM) HEADERS. * AVAILABLE IN SHORT OR LONG LATCH STYLES. CHECK STYLE FOR MATCH. D D 3 X 7 CARRIER HOUSING * INTEGRAL LOCKING FEATURE. * INCLUDES TWO RETENTION CLIPS. OPTIONAL CENTERBUMP PIN STRIP LATCH * AVAILABLE FOR THE RIGHT ANGLE SCI CONNECTOR. GROUND ROW * RoHS COMPLIANT SIGNAL ROW 98XX-PSMO NORMAL "MO" RETENTION STYLE 2 PHYSICAL: INSULATION MATERIAL: RETAINER IS FLIPPED 180 END TO END C COLOR: FLAMMABILITY: MARKINGS: CONTACTS: 2 ROW CARRIER: POLYCARBONATE 3 X 7 CARRIER: GLASS REINFORCED POLYESTER BLACK UL 94V-0 3M LOGO COPPER ALLOY C 98XX-PSMR REVERSE "MR" RETENTION STYLE DRAWING NUMBER .100 SCI CONNECTOR CARRIER VERSION TYPE 24 (SEE TECH SHEET TS-0803) GROUND ROW SIGNAL ROW 78-5100-0802-8 C REVISION OPTIONAL CENTERBUMP B C 92908 SEP 24,2020 JNC FJR REVISE ORDERING INFO SHT 2 B 44714 JAN 03,2013 JNC RS DRFT CHKD REVISED AND REDRAWN DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A NOTE: 1) PIN STRIP LATCH IS FOR USE WITH .100 SCI, RIGHT ANGLE CONNECTOR TYPE 22 ONLY. (SEE TECH SHEET TS-0803) DIVISION 2 ROW CARRIER 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect 8 INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLIONE JAN 03,2013 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 ECO DRFT DIVISION CODE Interconnect Solutions DO NOT SCALE DRAWING REV 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 MFG DATE APPVL DATE R. SCHERER JAN 03,2013 3M COPYRIGHT 2020 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) .100" ASSEMBLY HARDWARE CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-0802-8 DET. LISTS 1 YES NO C SHT 1 OF 4 Imaged: Central Standard Time 9/24/2020 -- UTC Offset (hrs) 6 B A 8 7 6 5 4 3 2 1 NOTES 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) 1 POLARIZING GROOVE OMITTED FOR POSITIONS 6 AND 8. .100" ASSEMBLY HARDWARE 2 POLARIZING GROOVE OMITTED FOR POSITIONS 6, 8, 10, 12 AND 14. 3 THE NORMAL "M0" RETENTION STYLE IS ILLUSTRATED. FOR THE REVERSE "MR" RETENTION STYLE THE CABLE ASSEMBLY RETAINER IS FLIPPED 180 END TO END AND THE "SIGNAL" AND "GROUND" ROWS OF CONTACTS ARE ALSO REVERSED. +.000 DIM. "D" -.008 SEE TABLE 1 .00 .559 DIM. "D" -.20 D +.000 DIM. "C" -.008 LOCKING WEDGE LOCKS "RELEASE LATCH" IN CLOSED POSITION SEE TABLE 1 14.20 LONG LATCH 4 OPTIONAL LOCKING WEDGE PREVENTS SCI REMOVAL. 25 POSITION (CUT TO LENGTH) 5 RELEASE LATCH CAN BE MOVED WITH FINGERNAIL TO ALLOW REPLACEMENT OF SCI CABLE LINE. .00 A DIM. "C" -.20 LONG LATCH CARRIER D CABLE ASSEMBLY RETAINER SEE NOTE 3 .711 2X .421 18.05 CARRIER BOTTOM HALF 10.70 SHORT LATCH A .240 6.10 +.000 DIM. "B" -.008 SEE TABLE 1 .100 SEE TABLE 1 .10 TYP. C DRAWING NUMBER DIM. "A" .004 REVISION * * * * * * * * * .00 DIM. "B" -.20 DIM. "A" C CONTACT QTY. DIM. "A" DIM. "B" DIM. "C" DIM. "D" 06 .20 [5.08] .41 [10.48] .32 [8.22] .46 [11.68] 08 .30 [7.62] .51 [13.02] .42 [10.76] .56 [14.22] 10 .40 [10.16] .61 [15.56] .52 [13.30] .66 [16.76] 12 .50 [12.70] .71 [18.10] .62 [15.84] .76 [19.30] 14 .60 [15.24] .81 [20.64] .72 [18.38] .86 [21.84] 16 .70 [17.78] .91 [23.18] .82 [20.92] .96 [24.38] 20 .90 [22.86] 1.11 [28.26] 1.02 [26.00] 1.16 [29.46] 26 1.20 [30.48] 1.41 [35.88] 1.32 [33.62] 1.46 [37.08] 30 1.40 [35.56] 1.61 [40.96] 1.52 [38.70] 1.66 [42.16] 34 1.60 [40.64] 1.81 [46.04] 1.72 [43.78] 1.86 [47.24] 40 1.90 [48.26] 2.11 [53.66] 2.02 [51.40] 2.16 [54.86] 50 2.40 [60.96] 2.61 [66.36] 2.52 [64.10] 2.66 [67.56] 60 2.90 [73.66] 3.11 [79.06] 3.02 [76.80] 3.16 [80.26] 64 3.10 [78.74] 3.31 [84.14] 3.22 [81.88] 3.36 [85.34] 78-5100-0802-8 C TABLE 1: CARRIER POSITIONS * TOOLED POSITIONS: CONTACT 3M SALES FOR ADDITIONAL POSITIONS 2.54 ROW OF GROUND CONTACTS (SEE NOTE 3) B B .100 2.54 .14 3.5 SEE NOTE 1 CENTERBUMP (OPTIONAL) SEE NOTE 2 ASSEMBLY OF LOCKING WEDGE SEE NOTE 4 CABLE ASSEMBLY C ORDERING INFORMATION B NEXT ASSEMBLY ACCESS CODES 98XX-XXXX DIVISION MOLDED RETENTION FEATURE: M0 = NORMAL MR = REVERSE CONTACT QTY. SEE TABLE 1 DO NOT SCALE DRAWING SECTION A-A THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2018 ALL SURFACES MARKED ONLY 6 5 4 3 REV JAN 03,2013 ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE JAN 03,2013 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE MAX SURFACE ROUGHNESS 7 44714 DIVISION CODE Interconnect Solutions CARRIER STYLE: PS = CENTERBUMP, SHORT LATCHES NS = NO CENTERBUMP, SHORT LATCHES PL = CENTERBUMP, LONG LATCHES NL = NO CENTERBUMP, LONG LATCHES 8 JNC FJR JNC RS DRFT CHKD REVISED AND REDRAWN DESIGN REFERENCE A SEP 24,2020 REVISE ORDERING INFO SHT 2 RELEASE LATCH SEE NOTE 5 2 ROW CARRIER HOUSING 92908 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 MFG DATE APPVL DATE R. SCHERER JAN 03,2013 3M COPYRIGHT 2020 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) .100" ASSEMBLY HARDWARE CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-0802-8 DET. LISTS 1 YES NO C SHT 2 OF 4 Imaged: Central Standard Time 9/24/2020 -- UTC Offset (hrs) 6 ROW OF SIGNAL CONTACTS (SEE NOTE 3) A 8 7 6 5 4 3 2 1 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) .100" ASSEMBLY HARDWARE D D +.000 .492 -.004 0.00 12.50 -0.10 RETENTION CLIP 2X .100 SCI CONNECTOR CARRIER VERSION TYPE 24 .476 .025 12.10 0.63 .689 C SQ. PIN C 17.50 .232 5.90 INTERFACE 3.60 0.51 C 27.00 .142 .020 REVISION 1.063 0.20 .113 .100 2.86 .100 TAIL .276 B .746 18.94 7.00 +.000 .335 -.004 .004 0.10 DRAWING NUMBER 16.00 .008 78-5100-0802-8 .630 2.54 2.54 .233 .004 5.92 0.10 B ORDERING INFORMATION PIN STRIP WITH LATCH 2402-3505 RC C +.000 .039 -.004 +.00 [1.00 ] -.10 X 45 2 PLACES SEP 24,2020 JNC FJR REVISE ORDERING INFO SHT 2 B .100 JAN 03,2013 JNC RS DRFT CHKD REVISED AND REDRAWN DESIGN REFERENCE TYP. NEXT ASSEMBLY ACCESS CODES DIVISION DO NOT SCALE DRAWING THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 6 5 4 3 ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE JAN 03,2013 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 3 X 7 CARRIER HOUSING 9821-5000 REV DIVISION CODE Interconnect Solutions ORDERING INFORMATION 7 44714 2.54 A 8 92908 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 MFG DATE APPVL DATE R. SCHERER JAN 03,2013 3M COPYRIGHT 2020 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) .100" ASSEMBLY HARDWARE CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-0802-8 DET. LISTS 1 YES NO C SHT 3 OF 4 Imaged: Central Standard Time 9/24/2020 -- UTC Offset (hrs) 6 0.00 8.50 -0.10 A 8 7 6 5 4 3 2 1 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) .100" ASSEMBLY HARDWARE D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C 78-5100-0802-8 C REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. DRAWING NUMBER Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Company Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect B B C 92908 SEP 24,2020 JNC FJR REVISE ORDERING INFO SHT 2 B 44714 JAN 03,2013 JNC RS DRFT CHKD REVISED AND REDRAWN DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION INTERPRET PER ASME Y14.5 - 2018 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLIONE JAN 03,2013 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 8 ECO DRFT DIVISION CODE Interconnect Solutions DO NOT SCALE DRAWING REV 2 INCHES .0 .1 .00 .01 .000 .005 .0000 .0002 MILLIMETERS 0 2 .0 .3 .00 .13 .000 .005 ANGLES MN 55144 MFG DATE APPVL DATE R. SCHERER JAN 03,2013 3M COPYRIGHT 2020 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE 3MTM SHIELDED CONTROLLED IMPEDANCE (SCI) .100" ASSEMBLY HARDWARE CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-0802-8 DET. LISTS 1 YES NO C SHT 4 OF 4 Imaged: Central Standard Time 9/24/2020 -- UTC Offset (hrs) 6 C A