981515-027-19.7-C-1-25-1

3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series • Mates with Hard Metric/Compact PCI® IEC 61076-4-101 backplane connectors, UHM headers, HSHM headers • Hard Metric 2 mm × 2 mm grid spacing • Fully-shielded coaxial or twin axial interface • Standard or custom wafer stacks • Range of high performance cable - 50 Ω, 75 Ω coax, 85 Ω, 100 Ω twin axial • Power wafer • Semi-rigid stacking system reduces insertion force • Mix-and-match custom options Date Modified: October 15, 2010  TS-2364-A Sheet 1 of 5 Physical Connector/Insulation Material: LCP Flammability: UL 94V-0 Connector Contact Material: Copper alloy Plating: Underplating: 100 µ" (2.54 µm) Avg. Nickel Contact Interface: [30 μ″ ] Gold minimum wipe area Ground Shield Contact: Underplating: 100 µ" (2.54 µm) Avg. Nickel overall Overplating: 10 µ" (0.25 µm) Avg. Gold Electrical Cable Voltage Rating: 30 V Cable Current Rating: 1 A min. (Rating is application dependent) Cable Insulation Resistance: >100 Megohms at 500 VDC Cable Withstanding Voltage: 500 VDC for 1 minute Cable Characteristic Impedance: 50 Ω and 75 Ω single ended assemblies, 85 Ω and 100 Ω differential assemblies Environmental Cable Temperature Rating: -20 to +80°C Minimum UL File No.: E86982 Mechanical Cable Connector Insertion Force: 0.3 N [1.35 pounds]/Single wafer max Cable Connector Withdrawal Force: 0.11 N [0.50 pounds]/Single wafer max Cable Retention Force: 44.5 N [10 pounds] minimum Cable Connector Durability: 50 Mating Cycles 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Ultra Hard Metric (UHM) High-Performance Cable Assembly 2 mm 5×1 Column Stacked Wafers for Coax or Twin Axial Cable, Power UHM Series Shielded Controlled Impedance (SCI) Wafer Receptacle mm [Inch] Tolerance Unless Noted mm .0 .00 ±.3 ±.15 .000 [ ] Dimensions for Reference Only Assembly Tolerance