C1700SS

3M MicroTouch Display C1700SS ™ ™ The Clear Choice for Optics, Reliability, and Ease of Integration The 3M MicroTouch Display C1700SS (17”), a robust metal chassis display using 3M's industry-standard surface capacitive touch technology, provides a durable, optically-enhanced, and cost competitive alternative to 5-wire resistive displays used in industrial automation equipment and kiosk enclosures. The C1700SS display offers multiple mounting options to make integration easy and a variety of bezel options for sealing against liquids and other contaminants. The Clear Choice The C1700SS display utilizes an all-glass surface capacitive touch sensor with the proprietary 3M ClearTek Hard Coat to deliver superior durability, 91.5% light transmission, 225-nit brightness (with touch sensor), 500:1 contrast ratio and an ultra-fast 5.4 millisecond touch contact time. TM TM Multiple Mounting and Bezel Options Multiple mounting and bezel options enable customers to meet their application needs at minimal cost. The C1700SS display offers a 75mm VESA pattern to provide arm mounting capability for industrial automation equipment. This minimizes the capital expenditure needed to upgrade equipment with touch. L-brackets are included for installations requiring the touch display to be fully enclosed. The C1700SS display offers two bezel options. The Slimline bezel (optional) is flush with the edges of the display and is ideal for armmounted applications and is ideal for solutions that require a NEMA 1 seal rating. The Industrial Flanged bezel (optional), a metal-gasketed bezel, enables kiosks or others enclosures to support NEMA 4X / IP66 seal ratings. Cost Effective The C1700SS display uses an all-glass touch sensor with no moving parts, whereas 5-wire resistive solutions rely on compressing the top film layer against a conductive coating to recognize touch. Since force is required to activate a resistive touch sensor it is susceptible to mechanical wear and the appearance of “Newton Rings” which can potentially reduce product life and optical performance. The C1700SS touch display operates reliably in the presence of on-screen contaminants and carries a 3-year “unlimited touches” warranty. Recommended Applications • Industrial Automation • Self Service • Hospitality • Security Systems • Point-of-Information (POI) • Home Automation Feature All-Glass, One-Layer Solution Benefit • • • • Provides 91.5% light transmission as compared to 80% for certain 5-wire resistive solutions Unaffected by UV light that can cause degradation of optics and yellowing of film-based touch sensors over time No moving parts improves reliability Inherently free from the appearance of “Newton Rings” 3M ClearTek Hard Coat • Proprietary coating is uniformly heat infused into the glass creating a non-permeable barrier for increased scratch and chemical resistance • Low surface energy coating promotes smooth finger drag • Unaffected by surface contaminants • Unlike other touch display manufacturers that utilize 3rd party touch sensors, electronics, and or software in their design, 3M owns, understands, and warranties the entire system for an unlimited amount of touches for 3 years Total Touch Solution 3M MicroTouch Display C1700SS Specifications ™ ™ Functional Features LCD Technology Display Colors Pixel Pitch Brightness without touch sensor Brightness with touch sensor (max.)1 Contrast Ratio Video Response Time Touch Response Time Viewing Angle2 Control Type Maximum Resolution Operating Environment Storage Environment TFT, Active Matrix 16.2 million .264mm 250 cd/m2 (nit) typical 225 cd/m2 (nit) typical 1000:1 typical 5 ms typical 5.4 ms typical Horizontal: +/-80 degrees typical Vertical: +/-80 degrees typical OSD 1280 x 1024 0 to +40 degrees C Relative Humidity, non-condensing 90% -25 to +60 degrees C With optional Slimline Bezel (Part Number: 2709122) Optional Industrial Flange Bezel (Part Number: 5021104) On Screen Display Controls Standard rear mounted controls. Physical Features Physical Dimensions (Enclosure) (WxHxD) Display Area (WxH) Video Cable Connector Power Supply Internal Power Savings Power Consumption Backlight Life Weight RoHS Compliant Agency Approvals Mounting Options Warranty 405.7 x 335.1 x 49 mm 15.98 x 13.18 x 1.93 inches 337.9 x 270.3 mm 13.3 x 10.6 inches 15 Pin D-Sub 12V DC Power Supply DPMS, VESA Compliant 30 watts normal operation 50,000 hrs. typical 4.6kg/10.1 lbs Yes FCC B, CE, UL/cUL Set of 2, side or top/bottom mounting brackets, VESA 75 mm 3 years of unlimited touches ™ ™ Mounting L-brackets (standard) Standard Part Numbers Part Number 11-4945-227-00 11-4945-225-00 Description Serial (no bezel) USB (no bezel) (1) Brightness measured on a display with 3M MicroTouch Sensor SCT3250 surface capacitive sensor. (2) Measured at a contrast ratio of 10. NOTE: Mechanical Drawings available at www.3m.com/touch 3M Touch Systems Subsidiary of 3M Company 501 Griffin Brook Park Drive Methuen, MA 01844 U.S.A. 1-888-659-1080 www.3M.com/touch RoHS Directive compliant: In accordance with European Directive 2002/95/EC, “RoHS Directive compliant” means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s knowledge and belief based on information provided by third party suppliers to 3M. (9/06) IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems’ Products and software are warranted to meet their published specifications from the date of shipment and for the period stated in the specification. 3M Touch Systems makes no additional warranties, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products and software are fit for User’s particular purpose and suitable for its method of production, including intellectual property liability for User’s application. If the Product, software or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch Systems’ sole obligation and User’s and Purchaser’s exclusive remedy, will be, at 3M Touch Systems’ option, to repair or replace that Product quantity or software mediator to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Systems’ warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or software for any loss or damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted. (7/02) 3M, MicroTouch, and ClearTek are trademarks of 3M Company. Printed in USA © 3M 2010 C1700SS -0410