3M™ CP2 Press-Fit Header
2 mm Type AB, 95, 110 and 125 Signal Contacts
•
•
•
•
•
•
•
•
•
•
CP2 Series
25 mm basic system unit
38, 44 and 50 mm module
2 mm grid spacing allows for high signal density at low cost
“Eye of the Needle” compliant pin press-fit design reduces manufacturing
time and cost
Three contact mating levels for Early Mate Late Break or “Hot Swap”
applications reduces manufacturing time and cost
Feed through termination available for midplane applications
Additional grounding rows available for improved ground bounce and
EMI immunity
Mates with 5-row 3M™ HSHM, UHM, and CP2 Sockets
End-to-end stackable with 5-row 3M™ HSHM, HM and CP2 Headers
See the Regulatory Information Appendix (RIA) in the “RoHS compliance”
section of www.3Mconnectors.com for compliance information
(RIA E1 & C1 apply)
Date Modified: July 16, 2015
Physical
TS-2263-B
Sheet 1 of 7
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL94V-0
Contact:
Material: Copper Alloy
Plating: See Ordering Information
Mechanical
Mating Force: ≤ 0.75N/PIN
Withdrawl Force: ≥ 0.15N/PIN
Mating and Un-mating Operations: 200 for KR plating
Electrical
Current Rating:
Contact Resistance:
Insulation Resistance:
Test Voltage:
1.0 Amperes at 70°C with all contacts powered
≤ 20 mΩ
≥ 10,000 MΩ
750 VACRMS
Environmental
Temperature Ratings: -55°C to 125°C
PCB Data
Recommended PCB Plated Through Hole:
Drill hole diameter:
Hole platings:
PCB thickness:
Press-In Force:
Retention Force:
Ө 0.6±0.05 mm
Ө 0.7±0.02 mm
Cu 25~50μm, Sn
很抱歉,暂时无法提供与“CP2-HAB110-A1-KR”相匹配的价格&库存,您可以联系我们找货
免费人工找货