3M™ CP2 Press-Fit Header
2 mm Type B, 95, 110 and 125 Signal Contacts
•
•
•
•
•
•
•
•
•
•
CP2 Series
25 mm basic system unit
38, 44 and 50 mm module
2 mm grid spacing allows for high signal density at low cost
“Eye of the Needle” compliant pin press-fit design helps reduce
manufacturing time and cost
Three contact mating levels for Early Mate Late Break or “Hot
Swap” applications help reduce manufacturing time and cost
Feed through termination available for midplane applications
Additional grounding rows available for improved ground bounce
and EMI immunity
Mates with 5 row 3M™ HSHM, UHM and CP2 Sockets
End to end stackable with 5 row 3M™ HSHM, HSM, HM, and
CP2 Headers
See the Regulatory Information Appendix (RIA) in the “RoHS
compliance” section of www.3Mconnectors.com for compliance
information. (RIA E1 & C1 apply)
Date Modified: July 16, 2015
TS-2267-C
Sheet 1 of 7
Physical
Insulation:
Material: Glass Filled Polyester (PBT)
Flammability: UL94V-0
Contact:
Material: Copper Alloy
Plating: See Ordering Information
Mechanical
Mating Force:
Withdrawl Force:
Mating and Un-mating Operations:
Application:
≤ 0.75N/PIN
≥ 0.15N/PIN
200 for KR plating
This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101)
Electrical
Current Rating:
Contact Resistance:
Insulation Resistance:
Test Voltage:
1.0 Amperes at 70°C with all contacts powered
≤ 20 mΩ
≥ 10,000 MΩ
750 VACRMS
Environmental
Temperature Ratings: -55°C to +125°C
PCB Data
Recommended PCB Plated Through Hole:
Drill Hole Diameter:
Hole platings:
PCB thickness:
Press-In Force:
Retention Force:
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
ϴ 0.6±0.05 mm
Ө 0.7±0.02 mm
Cu 25~50 μm, Sn
很抱歉,暂时无法提供与“CP2-HB125-E1-FJ”相匹配的价格&库存,您可以联系我们找货
免费人工找货