3M™ CP2 Press-Fit Socket
2 mm Type AB, 95, 110 and 125 Signal Contacts Right Angle
CP2 Series
• 25 mm basic system unit
• 38, 44 and 50 mm module
• Designed according to IEC 61076-4-101 and IEC 60352-5
Standards
• 2 mm grid spacing allows for high signal density at low cost
• “Eye of the Needle” compliant pin press-fit design reduces
manufacturing time and cost
• Additional grounding row available for improved ground bounce
and EMI immunity
• Mates with 5-row 3M™ HM and CP2 Headers
• End-to-end stackable with 5-row 3M™ HSHM, UHM and
CP2 Sockets
• See the Regulatory Information Appendix (RIA) in the “RoHS
compliance” section of www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: July 16, 2015
TS-2264-C
Sheet 1 of 2
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL94V-0
Contact:
Material: Copper Alloy
Plating: See Ordering Information
Mechanical
Mating Force: ≤ 0.75N/PIN
Withdrawl Force: ≥ 0.15N/PIN
Mating and Un-mating Operations: 200 for KR plating
Electrical
Current Rating:
Contact Resistance:
Insulation Resistance:
Test Voltage:
1.0 Amperes at 70°C with all contacts powered
≤ 20 mΩ
≥ 10,000 MΩ
750 VACRMS
Environmental
Temperature Ratings: -55°C to +125°C
PCB Data
Recommended PCB Plated Through Hole:
Drill hole diameter:
Hole platings:
PCB thickness:
Press-In Force:
Retention Force:
3
Electronics Materials Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
Ө 0.6±0.05 mm
Ө 0.7±0.02 mm
Cu 25~50 μm, Sn
很抱歉,暂时无法提供与“CP2-SAB095-G1-KR”相匹配的价格&库存,您可以联系我们找货
免费人工找货