3M™ CP2 Press-Fit Socket
2 mm Type B, 95, 110, and 125 Signal Contacts, Right Angle
CP2 Series
• 25 mm basic system unit
• 50 mm module
• Designed according to IEC 61076-4-101 and IEC 60352-5
Standards
• 2 mm grid spacing allows for high signal density at low cost
• “Eye of the Needle” compliant pin press-fit design helps
reduce manufacturing time and cost
• Additional grounding row available for improved ground
bounce and EMI immunity
• Mates with 5 row 3M™ HM, and CP2 Headers
• End-to-end stackable with 5 row 3M™ HSHM, UHM,
HM, and CP2 Sockets
• See the Regulatory Information Appendix (RIA) in the
“RoHS compliance” section of www.3Mconnectors.com
for compliance information (RIA E1 & C1 apply)
Date Modified: July 16, 2015
Physical
TS-2268-B
Sheet 1 of 2
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL94V-0
Contact:
Material: Copper Alloy
Plating: See Ordering Information
Mechanical
Mating Force:
Withdrawl Force:
Mating and Un-mating Operations:
Application:
≤ 0.75N/PIN
≥ 0.15N/PIN
200 for KR plating
This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101)
Electrical
Current Rating:
Contact Resistance:
Insulation Resistance:
Test Voltage:
1.0 Amperes at 70°C with all contacts powered
≤ 20 mΩ
≥ 10,000 MΩ
750 VACRMS
Environmental
Temperature Rating: -55°C to +125°C
PCB Data
Recommended PCB Plated Through Hole:
Drill hole diameter:
Hole platings
PCB thickness:
Press-In Force:
Retention Force:
Ө 0.6±0.05 mm
Ө 0.7±0.02 mm
Cu 25~50 μm, Sn
很抱歉,暂时无法提供与“CP2-SB125-1-FJ”相匹配的价格&库存,您可以联系我们找货
免费人工找货