3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination
DIN 41612 Series
C
R
ec e ON
p
h la T
S c IN
he e U
d
et b ED
y
23
05
• Multi-pin count socket for VME, VXI
and Multibus II daughter cards
• Early mate late break (EMLB) grounding
contacts for hot swapping
• Expanded pin counts
• Optional retention clips
• Mates with C-form and R-form sockets
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: March 26, 2007
Physical
D
IS
Insulation
Material:
Flammability:
Color:
Contact
Material:
Plating
Underplating:
Wiping Area:
Termination Area:
Marking:
Electrical
TS-1132-B
Sheet 1 of 4
Glass Filled Polyester (PCT)
UL 94V-0
Gray or Black
Copper Alloy
50 μ″ [ 1.27 μm ] Min. Nickel
(See Ordering Information)
(See Ordering Information)
Part Number and Date Code
Contact Resistance: 20 mΩ Max.
Current Rating: 3.0 A @ 30°C T-rise above ambient
Insulation Resistance: 1 x 10³ MΩ min. at 500 VDC
Environmental
T
Withstanding Voltage: 1 x 10³ VAC for 1 minute
Temperature Rating: -55°C to +125°C
Process Temperature Rating: 260°C per J-STD-020C
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination
DIN 41612 Series
D
F O R S P E C IA L P IN A R R A N G E M E N T S
C O N T A C T 3 M S A L E S R E P R E S E N T A T IV E S
"X"
"X "
A
.5 0 2
1 2.7 4
P IN A 1
.0 59
1.50
C
R
ec e ON
p
h la T
S c IN
he e U
d
et b ED
y
23
05
.3 43
8 .71
.43 3
1 1 .0 0
C
E
.0 25
0.64
B
.1 9 5
4 .9 5
.4 9 2
1 2 .5 0
.3 7 4
9 .5 0
.1 00
2 .54
.0 5 2
1 .3 2
.25 2
6 .4 0
.1 0 0
2.5 4
SE C T IO N X-X
.1 0 0
2.5 4
.15 0
3 .8 1
.1 20
3 .05
IS
In c h
D
RRX
'A ' S T Y L E R E T E N T IO N C L IP
F O R .0 6 2" A N D .0 9 3" P C B
T H IC K N E S S
T
Ordering Information
[m m ]
T o le ran c e U n le ss N o te d
R R XL
'B ' S T Y LE R E T E N T IO N C L IP
F O R .0 6 2" P C B T H IC K N E S S
in c h
.0
.0 0
.0 0 0
± .1
± .01 ± .0 0 5
[ ] D im en sio n s fo r R e fe re n ce
O n ly
DIN - XXX CP X - XXX - XXXX
Plating and Insulator Color Options:
See Table 3
Contact Quantity
See Table 1
Contact Loading Pattern:
A = A Row only
B = Rows A & C Filled
C = Rows A, B, & C Filled
D = Rows A & B Filled
E = B Row only
SRX
W IT H O U T R E T E N T IO N C LIP
Termination Options:
See Table 2
TS-1132-B
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination
DIN 41612 Series
Table 1
Load Pattern
A
B
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
2.100 [53.34]
1.754 [44.55]
1.900 [48.26]
1.500 [38.10]
2.100 [53.34]
1.754 [44.55]
1.900 [48.26]
1.500 [38.10]
2.100 [53.34]
1.754 [44.55]
1.900 [48.26]
1.500 [38.10]
2.100 [53.34]
1.754 [44.55]
1.900 [48.26]
1.500 [38.10]
2.100 [53.34]
1.754 [44.55]
1.900 [48.26]
1.500 [38.10]
3.700 [93.98]
3.354 [85.19]
3.500 [88.90]
3.100 [78.74]
3.700 [93.98]
3.354 [85.19]
3.500 [88.90]
3.100 [78.74]
3.700 [93.98]
3.354 [85.19]
3.500 [88.90]
3.100 [78.74]
3.700 [93.98]
3.354 [85.19]
3.500 [88.90]
3.100 [78.74]
016
032
048
032
016
032
064
096
064
032
040
080
120
080
040
050
100
150
100
050
C
R
ec e ON
p
h la T
S c IN
he e U
d
et b ED
y
23
05
Contact
Quantity
3.700 [93.98]
3.354 [85.19]
3.500 [88.90]
3.100 [78.74]
4.500 [114.30]
4.154 [105.51]
4.300 [109.22]
3.900 [99.06]
4.500 [114.30]
4.154 [105.51]
4.300 [109.22]
3.900 [99.06]
4.500 [114.30]
4.154 [105.51]
4.300 [109.22]
3.900 [99.06]
4.500 [114.30]
4.154 [105.51]
4.300 [109.22]
3.900 [99.06]
4.500 [114.30]
4.154 [105.51]
4.300 [109.22]
3.900 [99.06]
5.500 [139.70]
5.154 [130.91]
5.300 [134.62]
4.900 [124.46]
5.500 [139.70]
5.154 [130.91]
5.300 [134.62]
4.900 [124.46]
5.500 [139.70]
5.154 [130.91]
5.300 [134.62]
4.900 [124.46]
5.500 [139.70]
5.154 [130.91]
5.300 [134.62]
4.900 [124.46]
5.500 [139.70]
5.154 [130.91]
5.300 [134.62]
4.900 [124.46]
Table 2
DIM "C" in (mm)
0.114 (2.90)
0.180 (4.57)
0.114 (2.90)
0.180 (4.57)
0.114 (2.90)
0.180 (4.57)
Comments
No retention clips
No retention clips
With "A" style retention clips
With "A" style retention clips
With "B" style retention clips
With "B" style retention clips
Table 3
Plating
Suffix
Plastic
Color
TG30
Gray
TR
Gray
T
D
IS
SOLDER TERMINATION OPTION No
SR1
SR2
RR1
RR2
RR1L
RR2L
PRESS-FIT TERMINATION OPTION No
NA
MH
HS
KT
3M
Interconnect Solutions
http://www.3M.com/interconnects/
Black
Solder Tail
Terminations
Plating Composition
0.76 µm [30 µ"] Min. Au Contact Area
(RIA E3 & C2 apply) 2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
0.08 µm [3 µ"] Min. Au Contact Area
0.18 µm [7 µ"] Min. PdNi Contact Area
(RIA E3 & C2 apply)
2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
0.76 µm [30 µ"] Min. Au Contact Area
5.08 µm [200 µ"] Min. Reflowed Matte Whisker
(RIA E1 & C1 apply)
Mitigating Sn Term. Area
1.27 µm [50 µ"] Min. Ni all over
Black
0.08 µm [3 µ"] Min. Au over 0.18 µm
[7 µ"] Min. PdNi Contact Area
(RIA E1 & C1 apply) 5.08 µm [200 µ"] Min. Reflowed Matte Whisker
Mitigating Sn Term. Area
1.27 µm [50 µ"] Min. Ni all over
Black
0.25 µm [10 µ"] Min. Au Contact Area
5.08 µm [200 µ"] Min. Reflowed Matte Whisker
(RIA E1 & C1 apply)
Mitigating Sn Term. Area
1.27 µm [50 µ"] Min. Ni all over
TS-1132-B
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination
DIN 41612 Series
A
.100
2.54
.209
5.31
0.200
5.08
C
B
A
X
2 1
.100
2.54
0.100 TYP.
2.54
DRILLED HOLE. 2X
l O 0.006 M A B C
C
R
ec e ON
p
h la T
S c IN
he e U
d
et b ED
y
23
05
-B-
±.004
O .110
2.79 ±0.10
E
O DIM "F"
D
-C-
PLATED THRU HOLE
l O 0.004 M A B C
RECOMMENDED PCB HOLE PATTERN
DRILLED HOLE DIA. Cu THICKNESS
in (mm)
in (mm)
HOLE
"F"
HOLE PLATING TABLE For TG and TR (Solder Tail Leads)
OSP ENTEK
Electrolitic Au
Immersion Ag
Thickness (µin) µm Thickness µin (µm) Thickness µin (µm)
SnPb THICKNESS
in (mm)
FINISHED DIA. in (mm)
0.041 - 0.049 (1.04 - 1.24)
T
D
IS
HOLE PLATING TABLE For MH, HS and KT (Solder Tail Leads)
Immersion Matte Sn
DRILLED HOLE DIA. Cu THICKNESS
OSP ENTEK
Electrolitic Au
Immersion Ag
Thickness
µin (µm)
in (mm)
in (mm)
Thickness µin (µm) Thickness µin (µm) Thickness µin (µm)
HOLE
"F"
FINISHED DIA. in (mm)
0.041 - 0.049 (1.04 - 1.24)
TS-1132-B
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
C
R
ec e ON
p
h la T
S c IN
he e U
d
et b ED
y
23
05
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
D
IS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
T
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
C
R
ec e ON
p
h la T
S c IN
he e U
d
et b ED
y
23
05
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
D
IS
Name and Content of Hazardous Substances or Elements
Important Notice
T
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for
any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects
RIA-2217-A
© 3M 2007
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
DIN-064CSD-S1-TR DIN-096CSC-S1L-TR DIN-096CSC-R1L-TR DIN-096CSC-PSL-TR DIN-096CPC-SR1-TR DIN096CPC-RR1-TR DIN-064CSB-S1L-TR DIN-064CPB-SR1-TR DIN-048CSC-PSL-TR DIN-048CPC-SR1-TR DIN096CSC-S1-TG30 DIN-096RSC-SR1-TG30 DIN-096CSC-S1L-TG30 DIN-096CPC-SR1-TG30 DIN-096CPC-SR14ATR DIN-096CPC-RR1-TG30 DIN-064CSB-R1L-TG30 DIN-96CPC-CES70052 DIN-120CPC-SR1-TR DIN-120RSCSR1-TR DIN-150CPC-SR1-TR DIN-150CSC-PW1-RR