DIN-096SH-457-Q

3M™ DIN C-Form and R-Form Shroud .100” Backplane, Rear Plug DIN 41612 Series • Pinless shroud for double-sided backplane interconnects • Dimensionally compatible with DIN41612 specifications • Optional hand-press variation does not require arbor-press • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3M.com/ Interconnects for compliance information (RIA E1 & C1 apply) Date Modified: February 2, 2010  TS-2318-C Sheet 1 of 2 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL 94V-0 Color: Gray Contact: Material: N/A Pinless Electrical Current Rating: N/A Insulation Resistance: ≥1,000 MΩ,100VDC Withstanding Voltage: 1,000 VAC for 1 minute Environmental Temperature Rating: -55°C to +125°C Process Temperature Rating: Maximum Insulator Temperature 191°C (solder wave process only) 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ DIN C-Form and R-Form Shroud .100” Backplane, Rear Plug DIN 41612 Series mm [inch] Tolerance Unless Noted mm X. .X .XX ± 0.50 ± 0.25 ± 0.15 HAND SLIP-ON OPTION [ ] Dimension for Reference Only Ordering Information DIN - XXX SH - XXX - X Contact Quantity 096 = 3*32 Pin Fit Option: Q = Hand Press-Fit Body Height: 457 = 11.6 [.457”] This diagram serves only for Part Number descriptive definitions. PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS. 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com TS-2318-B Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. © 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.