page 1 of 3
Ultimate FX Full Facepiece
Reusable Respirator FF-400 Series
Issue Date 5/1/10
Flexibility in X-treme Conditions.
3M™ Ultimate FX Full Facepiece
Reusable Respirator FF-400 is
a reusable respirator that offers
comfort, durability, and ease
of cleaning.
Features/Benefits
Large Lens Featuring
Scotchgard™ Protector
• Paint and stain resistant lens
causes some liquids to bead
up on the surface so they can
be wiped off easily
• Provides a wide field of view
for excellent visibility
• Meets all requirements of ANSI
Z87.1-2003 for high impact (Z87+)
Passive Speaking Diaphragm
• Optimally positioned passive
speaking diaphragm for clearer
and easier communications
3M™ Cool Flow™ Valve
• Cool Flow™ valve helps make
breathing easier
• Helps provide cool, dry comfort
Comfort
• Silicone faceseal and nose cup
enhances comfort and durability
• Respirators are available in three
sizes (small, medium and large)
to comfortably fit many face sizes
• Comfort Cradle positions the
respirator comfortably on head
Easy to Use
• Bonded silicone gaskets to eliminate
loose gaskets that can be lost
The 3M™ Ultimate FX Full Facepiece Reusable Respirator FF-400
with replaceable cartridges/filters
• Respirator attachments twist on
and off for quick assembly
and disassembly
Multiple Mode Capacity
• Available in two different modes:
Negative Pressure Air Purifying
and Dual Airline Supplied Air
The FF-400 Series respirators
can be used in dual airline mode:
• Available with both back-mounted
and front-mounted breathing tubes
• Systems can be used in
combination with NIOSH
approved 3M™ Filters 2000/2200
Series, 3M™ Cartridges 6000
Series and 3M™ Filter/Cartridges
7000 Series
• Cartridge/filter connections
provide pressure and powered
and supplied air capability in one
respirator assembly
*Employer must provide a minimum of Grade D breathing air in accordance with OSHA requirements.
•C
an be used on both high and low
pressure systems*
•W
earer can disconnect the
airline at the air regulating
valve and the system is changed
to a filter/cartridge air purifying
mode— then back to supplied
air system with a simple
reconnection of the airline
•S
mall diameter breathing tubes
are simple to work with and easy
to clean and decontaminate
WARNING
These respirators help reduce
exposure to certain airborne
contaminants. Misuse may result
in sickness or death. Before
use, the wearer must read and
understand User Instructions
provided as a part of product packaging. Time use
limitations may apply. For proper use, see supervisor,
packaging or call 3M OH&ESD Technical Service at
1-800-243-4630. In Canada, call 1-800-267-4414 or
1-800-265-1840, ext. 6137.
3M™ Ultimate FX Full Facepiece
Reusable Respirator FF-400 Series
page 2 of 3
3M™ Filters and Accessories 2000 and 2200 Series, 7093, 5N11, 5P71
2071
2076HF
P95 Filter
P95 Filter with hydrogen
fluoride, nuisance level
acid gas relief*
2291
P100 Filter
2078
2091/07000
P95 Filter with nuisance
level organic vapor and
acid gas relief*
2296
P100 Filter with nuisance
level acid gas relief*
P100 Filter
2297
P100 Filter with nuisance
level organic vapor relief*
2096
2097/07184
P100 Filter with
nuisance level acid
gas relief*
7093
P100 Filter
P100 Filter with
nuisance level organic
vapor relief*
7093C/37173
P100 Cartridge/Filter
with hydrogen fluoride,
nuisance level organic vapor
and acid gas relief*
*Nuisance levels refer to concentrations below the OSHA PEL or other government standard, whichever is lower.
603
Filter Adapter (Use with the
5N11 or 5P71 Filters and
501 Filter Retainer)
5N11
N95 Filter (Use with the
501 Filter Retainer and
6000 Series cartridges)
5P71/07194
501
502
P95 Filter (Use with the Filter Retainer (Use with
Filter Adapter (Use with 2000
501 Filter Retainer and 5N11 and 5P71 Filters and and 2200 Series and 7093 Filters
6000 Series cartridges)
6000 Series cartridges)
and 6000 Series cartridges)
3M™ Cartridges 6000 Series
Product
Number
NIOSH Approval*
Product
Number
NIOSH Approval*
6001
Certain organic vapors (a)(b)
60921
P100/Certain organic vapors (a)(b)
6002
60922
6004
Chlorine, hydrogen chloride, and sulfur dioxide
or chlorine dioxide or hydrogen sulfide (a)(b)
Certain organic vapors, chlorine, hydrogen chloride,
and sulfur dioxide or hydrogen sulfide or hydrogen
fluoride (a)(b)
Ammonia and methylamine (a)(b)
60924
P100/Chlorine, hydrogen chloride, and sulfur dioxide or
chlorine dioxide or hydrogen sulfide (a)(b)
P100/Certain organic vapors, chlorine, hydrogen
chloride, and sulfur dioxide or hydrogen sulfide or
hydrogen fluoride (a)(b)
P100/Ammonia and methylamine (a)(b)
6005
Formaldehyde and certain organic vapors (a)(b)
60925
P100/Formaldehyde and certain organic vapors (a)(b)
6006
Certain organic vapors, chlorine, hydrogen chloride,
chlorine dioxide, sulfur dioxide, hydrogen sulfide
ammonia/methylamine, formaldehyde or hydrogen
fluoride (a)(b)(c)
60926
6009
Mercury vapor or chlorine gas (a)(b)
P100/Certain organic vapors, chlorine, hydrogen
chloride, chlorine dioxide, sulfur dioxide, hydrogen
sulfide ammonia/methylamine, formaldehyde or
hydrogen fluoride (a)(b)(c)
P100/Organic vapor/Acid gas (d)
P100/Mercury vapor or chlorine gas (a)(b)
6003
60923
60928
60929
* For respiratory protection against the following contaminants up to 10X PEL with half facepiece respirators and full facepiece respirators when qualitatively fit
tested, or 50X PEL with full facepiece respirators when quantitatively fit tested.
(a) All respirators and respirator/filter assemblies can be used up to the NIOSH approval limits, 10X PEL for half facepiece respirators and full facepiece respirators
when qualitatively fit tested, or 50X PEL for full facepiece respirators when quantitatively fit tested or the maximum use concentration allowable in applicable OSHA
standards, whichever is lower.
(b) For specific usage, limitations and warning information, see respirator and/or filter packaging, or call 3M OH&ESD Technical Service 1-800-243-4630.
In Canada call 1-800-267-4414.
(c) OSHA regulations require that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
(d) As recommended by the California Department of Pesticide Regulation No. 01-099 Methyl Bromide Field Fumigation.
3M™ Ultimate FX Full Facepiece
Reusable Respirator FF-400 Series
page 3 of 3
To complete a 3M™ Dual Airline Respirator System, select a facepiece, an adapter kit and an air supply hose.
For example: FF-402 + SA-2000 + W-9435-100 = complete system
High
Pressure
Low
Pressure
Standard Back-Mounted Adapter Kit. Includes SA-2500 Breathing Tube, GVP-127 Belt and SA-1009
Air Regulator or SA-1029 Connector (low pressure).
SA-2000
SA-2000LP
Combination Back-Mounted Adapter Kit. Includes 2600 Breathing Tube, GVP-127 Belt and SA-1009
Air Regulator or SA-1029 Connector (low pressure). Cartridges/Filters not included.
SA-2100
SA-2100LP
Standard Front-Mounted Adapter Kit. Includes SA-1500 Breathing Tube, GVP-127 Belt and SA-1009
Air Regulator or SA-1029 Connector (low pressure).
SA-1000
SA-1000LP
Combination Front-Mounted Adapter Kit. Includes SA-1600 Breathing Tube, GVP-127 Belt and SA-1009
Air Regulator or SA-1029 Connector (low pressure). Cartridges/Filters not included.
SA-1100
SA-1100LP
Accessories and Replacement Parts
Replacement Parts FF-400 Series
Accessories FF-400 Series
FF-400-01
Head Harness Buckle
FF-400-08
Bayonet Assembly Inhalation Valve
FF-400-20
Spectacle Kit
FF-400-02
Head Harness Button
FF-400-09
Exhalation Valve Cover (Standard)
FF-400-15
Lens Cover
FF-400-03
Lens Assembly
FF-400-10
Exhalation Valve Cover (Solid)
FF-400-04
Head Harness
FF-400-11
Nose Cup Assembly
FF-400-17
Semi-Permanent
Lens Cover
FF-400-05
Frame Assembly w/Screw
FF-400-13
Speaking Diaphragm Assembly
FF-400-06
Comfort Cradle
7582
Inhalation Valve
FF-400-07
Exhalation Valve Assembly
7583
3M™ Cool Flow™ Valve
Full Facepiece FF-400 Series
Facepieces
per box
Facepieces
per case
1
4
FF-401 Small
FF-402 Medium
FF-403 Large
For more information, please contact:
3M Occupational Health and
Environmental Safety Division
(OH&ESD)
In the U.S., contact:
3M™ Quantitative
Fit Test Adapter 601
3M™ Fit Test Kits
• FT-10 Qualitative Fit Test
Apparatus
For use with all 3M bayonet
attachment facepieces.
• FT-20 Qualitative Training and
Fit Testing Case (sweet solution)
• FT-30 Qualitative Fit Test
Apparatus (bitter solution)
Occupational Health and Environmental Safety Division
3M Center, Building 235-2E-91
St. Paul, MN 55144-1000
Customer Service
1-800-328-1667
Technical Assistance
1-800-243-4630
Website
www.3M.com/OccSafety
For other 3M products
1-800-3M HELPS
In Canada, contact:
3M Canada Company, OH&ESD
P.O. Box 5757
London, Ontario N6A 4T1
Customer Care
1-800-364-3577
Technical Assistance (Canada only)
1-800-267-4414
Website
www.3M.ca/safety
Technical Assistance In Mexico
01-800-712-0646
5270-2255, 5270-2119 (Mexico City only)
Technical Assistance In Brazil
0800-132333