FIP-NOZZLE

3M™ Fire Barrier Rated Foam FIP 1-Step Product Data Sheet 1. Product Description 4 4 4 4 SOUND BARRIER SMOKE SEAL 57 In STC 57-rated wall assembly Meets Air Leakage Requirements FIRE BARRIER TEMPERATURE UP TO 2 HOUR T RATED F Is a Rated Firestop Foam Is UL Listed Meets ASTM E 814 Meets the International Building Code for passive fire protection L RATED FILL, VOID OR CAVITY MATERIAL RATED ATTENTION: CODE OFFICIALS FIP 1-Step FILL, VOID OR CAVITY MATERIAL FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY 50L6 STC 3M™ Fire Barrier Rated Foam FIP 1-Step is a smoke, sound and firestopping foam for wall and floor penetrations. Premium two-part, easy-to-handle formulation. Expands up to five times during installation and bonds to most construction substrates including, but not limited to, concrete, metal, wood, plastic and cable jacketing. Dries to a flexible solid. During a fire, product maintains a tight firestop against smoke and flame. • Re-enterable/repairable • Sag-resistant formulation • Excellent adhesion • Paintable with primer • Quick cure and eliminates the need for mineral wool and caulk UP TO 1 HOUR PLEASE SEE APPROPRIATE UL SYSTEM FOR ASSOCIATED RATING. 2. Applications Typical applications include: blank openings, metal pipe, cables, cable tray, insulated pipe, combination penetrations through concrete floor/wall and gypsum wall board assemblies. 3. Specifications FIP 1-Step shall be a two-component, ready-to-use, gun-grade, firestopping foam. FIP 1-Step shall be tested to the criteria of ASTM E 814/UL 1479 Standard Test Method for Fire Tests of Penetration Firestop Systems, ASTM E 84/UL 723 Standard Test Method for Surface Burning Characteristics of Building Materials, ASTM E 90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements, and ASTM E 413 Classification for Rating Sound Insulation. FIP 1-Step shall meet the requirements of the IBC, IRC, IFC, IPC, IMC, NFPA 5000, NEC (NFPA 70), NFPA 101 and NBCC. Typically Specified Divisions Division 7 Section 07 84 00 – Firestopping Section 07 27 00 – Air Barriers Related Sections Section 07 86 00 – Smoke Seals Section 07 87 00 – Smoke Containment Barriers Section 21 00 00 – Fire Suppression Section 22 00 00 – Plumbing Section 26 00 00 – Electrical 4. Storage and Shelf Life Storage:  IP 1-Step should be stored indoors in dry conditions between 40°F and 85°F (5°C and 30°C). Avoid freeze/thaw F exposures of the FIP 1-Step while still in the packaging. If product freezes, then product must be fully thawed and brought to ideal application temperature prior to use (See Section 5). Shelf Life: FIP 1-Step shelf life is 16 months in original unopened containers from date of packaging when stored above 68°F (20°C) and below 90°F (32.2°C). Lot numbering: First to fourth digit = Date of Production (YYMM); Fifth digit = 4 (Production Code); Sixth and Seventh digit = (Batch #); (Note: Expiration Date marked on cartridge) For technical support relating to 3M™ Fire Protection Products and Systems, call: 1-800-328-1687 For more information on 3M™ Fire Protection Products, visit: www.3M.com/firestop 5. Performance and Typical Physical Properties Maroon 50° to 120°F (10° to 49°C) Flame Spread 10, Smoke Development 50 57 when tested in STC 57 rated wall assembly 12.85 fl. oz. Cartridge (380mL)