FP-301H-3/4-GN

3M™ Heat Shrink Tubing FP-301 Flexible, Polyolefin Data Sheet Description November 2018 3M™ Heat Shrink Tubing FP-301 offers an excellent balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuous operation, all 3M FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow. 3M FP-301 tubing is rated for continuous operation at -55°C (-67°F) to 135°C (275°F), and is designed to withstand elevated temperatures to 300°C (572°F) for short periods. Minimum shrink temperature for all 3M FP-301 tubing is 100°C (212°F). Agency Approvals & Self Certifications Meets requirements of: • • • • AS23053/5, Class 1, Class 2 (Clear)* UL Recognized, File E-39100, at 600 volts maximum @ 125°C CSA Certified, CSA LR38227, at 600 volts maximum @ 125°C For RoHS and REACH information, please visit www.3M.com/regs *Formerly MIL-I-23053/5, MIL-DTL-23053/5 and SAE-AMS-DTL-23053/5 Applications 3M FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering. Shrink Ratio 3M FP-301 tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness is proportional to the degree of recovery. 1 of 4  3M™ Heat Shrink Tubing FP-301 Standard Sizes and Dimensions Ordering Size (Nominal) Expanded I.D. (Minimum) In. (mm) Recovered I.D. (Maximum In. (mm) Recovered Wall Thickness (Nominal) In. (mm) 3/64 .046 (1,17) .023 (0,58) .016 (0,41) 1/16 .063 (1,60) .031 (0,79) .017 (0,43) 3/32 .093 2,36) .046 (1,17) .020 (0,51) 1/8 .125 (3,18) .062 (1,57) .020 (0,51) 3/16 .187 (4,75) .093 (2,36) .020 (0,51) 1/4 .250 (6,35) .125 (3,18) .025 (0,64) 3/8 .375 (9,53) .187 (4,75) .025 (0,64) 1/2 .500 (12,70) .250 (6,35) .025 (0,64) 3/4 .750 (19,05) .375 (9,53) .030 (0,76) 1 1.000 (25,40) .500 (12,70) .035 (0,89) 1-1/2 1,500 (38,10) .750 (19,05) .040 (1,02) 2 2.000 (50,80) 1.000 (25,40) .045 (1,14) 3 3.000 (76,20) 1.500 (38,10) .050 (1,27) 4 4.000 (101,60) 2.000 (50,80) .055 (1,40) 2 of 4 3M™ Heat Shrink Tubing FP-301 Typical Properties Standard Colors Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured at room temperature 73°F (23°C) unless otherwise stated. Physical Property Typical Value US units (metric) Tensile Strength 2400 psi Ultimate Elongation 400% Longitudinal Change ±5% Secant Modulus (2%) 13,000 psi Specific Gravity 1.3 (Opaque) .93 (Clear) Operating Temperature -67° to 275°F (-55° to +135°C) Shrink Temperature (minimum) 212°F (100°C) Heat Aging (336 hrs. @ 175° C) Elongation 175% Heat shock (4 hrs. @ 250° C) No dripping, flowing, cracking, passes mandrel wrap test Low Temperature Flexibility (4 hrs @ -55° C) No cracking Scant Modules (2%) 13,000 psi Flammability Self-extinguish, Meets UL 224 All-Tubing Flame Test (Except Clear) Pass Electrical Property (Test Method) Typical Value Dielectric Strength 900 V/mil Volume Resistivity 1015 ohm/cm Chemical Property (Test Method) Typical Value Corrosion Resistance (Copper mirror) Non-corrosive Fungus Resistance Non-nutrient Water Absorption 0.2% Solvent Resistance Excellent Black, Clear Also available in Blue, Green, Red, White and Yellow. Price, MOQ and Lead Time will vary for these colors. Please contact Local Sales Representative or Customer Service Representative for more information. NOTE: The clear tubing is not flame retardant or UL listed. 3 of 4 3M™ Heat Shrink Tubing FP-301 Shelf Life & Storage 3M™ Heat Shrink Tubing FP-301 has a 10-year shelf life from date of manufacture when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and