3M™ Heat Shrink Tubing FP-301
Flexible, Polyolefin
Data Sheet
Description
November 2018
3M™ Heat Shrink Tubing FP-301 offers an excellent balance of electrical, physical
and chemical properties for a wide variety of industrial and military applications.
Rated for 135°C continuous operation, all 3M FP-301 tubing is split resistant,
mechanically tough, easily marked and resists cold flow.
3M FP-301 tubing is rated for continuous operation at -55°C (-67°F) to 135°C
(275°F), and is designed to withstand elevated temperatures to 300°C (572°F) for
short periods. Minimum shrink temperature for all 3M FP-301 tubing is 100°C
(212°F).
Agency Approvals &
Self Certifications
Meets requirements of:
•
•
•
•
AS23053/5, Class 1, Class 2 (Clear)*
UL Recognized, File E-39100, at 600 volts maximum @ 125°C
CSA Certified, CSA LR38227, at 600 volts maximum @ 125°C
For RoHS and REACH information, please visit www.3M.com/regs
*Formerly MIL-I-23053/5, MIL-DTL-23053/5 and SAE-AMS-DTL-23053/5
Applications
3M FP-301 tubing is typically used as a shrink-fit electrical insulation over cable
splices and terminations. It is also used for lightweight wire harness covering, wire
marking, wire bundling, component packaging and fire-resistant covering.
Shrink Ratio
3M FP-301 tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink
to 50% of its as-supplied internal diameter. The recovered wall thickness is
proportional to the degree of recovery.
1 of 4
3M™ Heat Shrink Tubing FP-301
Standard Sizes and
Dimensions
Ordering
Size
(Nominal)
Expanded I.D.
(Minimum)
In.
(mm)
Recovered I.D.
(Maximum
In.
(mm)
Recovered Wall Thickness
(Nominal)
In.
(mm)
3/64
.046
(1,17)
.023
(0,58)
.016
(0,41)
1/16
.063
(1,60)
.031
(0,79)
.017
(0,43)
3/32
.093
2,36)
.046
(1,17)
.020
(0,51)
1/8
.125
(3,18)
.062
(1,57)
.020
(0,51)
3/16
.187
(4,75)
.093
(2,36)
.020
(0,51)
1/4
.250
(6,35)
.125
(3,18)
.025
(0,64)
3/8
.375
(9,53)
.187
(4,75)
.025
(0,64)
1/2
.500
(12,70)
.250
(6,35)
.025
(0,64)
3/4
.750
(19,05)
.375
(9,53)
.030
(0,76)
1
1.000
(25,40)
.500
(12,70)
.035
(0,89)
1-1/2
1,500
(38,10)
.750
(19,05)
.040
(1,02)
2
2.000
(50,80)
1.000
(25,40)
.045
(1,14)
3
3.000
(76,20)
1.500
(38,10)
.050
(1,27)
4
4.000
(101,60)
2.000
(50,80)
.055
(1,40)
2 of 4
3M™ Heat Shrink Tubing FP-301
Typical Properties
Standard Colors
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated.
Physical Property
Typical Value
US units (metric)
Tensile Strength
2400 psi
Ultimate Elongation
400%
Longitudinal Change
±5%
Secant Modulus (2%)
13,000 psi
Specific Gravity
1.3 (Opaque)
.93 (Clear)
Operating Temperature
-67° to 275°F (-55° to +135°C)
Shrink Temperature (minimum)
212°F (100°C)
Heat Aging (336 hrs. @ 175° C)
Elongation 175%
Heat shock (4 hrs. @ 250° C)
No dripping, flowing, cracking,
passes mandrel wrap test
Low Temperature Flexibility
(4 hrs @ -55° C)
No cracking
Scant Modules (2%)
13,000 psi
Flammability
Self-extinguish, Meets UL 224 All-Tubing
Flame Test (Except Clear)
Pass
Electrical Property (Test Method)
Typical Value
Dielectric Strength
900 V/mil
Volume Resistivity
1015 ohm/cm
Chemical Property (Test Method)
Typical Value
Corrosion Resistance (Copper mirror)
Non-corrosive
Fungus Resistance
Non-nutrient
Water Absorption
0.2%
Solvent Resistance
Excellent
Black, Clear
Also available in Blue, Green, Red, White and Yellow. Price, MOQ and Lead Time
will vary for these colors. Please contact Local Sales Representative or Customer
Service Representative for more information.
NOTE: The clear tubing is not flame retardant or UL listed.
3 of 4
3M™ Heat Shrink Tubing FP-301
Shelf Life & Storage
3M™ Heat Shrink Tubing FP-301 has a 10-year shelf life from date of manufacture
when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and