3M™ Flame Barrier FRB-WT Series
Data Sheet
Description
January 2013
3M™ Flame Barrier FRB-WT Series is a high, diffuse reflectance coated version of 3M
Flame Barrier FRB-NT. The white coating provides greater light reflectance, while the base
3M FRB-NT substrate material from 3M provides high flammability resistance, arc resistance,
and dielectric strength to safely contain electrical hazards.
These thin and flexible flame barriers are available in roll or sheet form, can be easily
converted to produce quality die-cut parts, and assembled into a finished product.
The flame barrier FRB-WT series provides the reliability you need from 3M, a trusted
company with over 30 years of experience providing insulating solutions that protect people,
equipment, and property around the globe.
Applications
The flame barrier FRB-WT series combines a high, diffuse reflectance surface to maximize
light output with both electric shock and flame protection for lighting luminaires (particularly
LED type). The excellent thermal stability of the flame barrier FRB WT series is also useful for
high temperature labels.
Features
The flame barrier FRB-WT series is:
An inorganic-based, halogen-free material (see regulatory section)
Coated to provide a white, 90% diffuse reflectance surface
UL 94 5VA rated – the most flame-retardant UL 94 rating, even better than UL 94 V-0
Available in thicknesses of 5.8 and 8.8 mil (0.145 and 0.225 mm)
Dimensionally stable – minimal to no shrinkage at elevated temperatures
Low volatile outgassing
Regulatory
The flame barrier FRB-WT series is:
REACH compliant. Product contains no Substances of Very High Concern (SVHC’s) on the
REACH candidate lists according to article 59 of Regulation (EC) No 1970/2006 up to June 2012.
For current status, go to www.3M.com/REACH
RoHS Meets MCVs 2011/65/EU. "RoHS meets MCVs" means that the product or part does
not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU
RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials.
Halogen Free
defined as both 1) no halogen compounds are intentionally added to the product or used in
the manufacturing process for the product and 2) any impurities present are less than 900 ppm bromine, less
than 900 ppm chlorine, and/or less than 1500 ppm total bromine and chlorine. The latter are the levels set forth
in certain industry standards, such as the International Electrotechnical Commission (IEC) 61249-2-21 standard.
The above information represents 3M’s knowledge
and belief which may be based in
whole or in part on information provided by 3rd party suppliers to 3M.
UL component recognized in accordance with UL 746 file E65069.
Flammability
The UL 94 test method is used to classify materials based on results from specified smallscale flame tests. These classifications (5VA, 5VB, V-0, V-1, V-2, HB), listed in decreasing
order of flame resistance, are used to distinguish a material's burning characteristics after
test specimens have been exposed to a specified test flame under controlled laboratory
conditions. These classifications typically apply to materials used in manufacturing
enclosures, structural parts, and insulators found in consumer electronic products.
A material classified as 5VA or 5VB is subjected to a flame ignition source that is
approximately five times more severe than that used in the V-0, V-1, V-2 and HB tests.
Furthermore, specimens in 5VA or 5VB may not drip any flaming particles and 5VA rated
specimens may not develop any burn-through holes during the test.
1 of 6
3
3M™ Flame Barrier FRB-WT Series
Typical Properties – Flame Barrier FRB-WT
Technical information provided consists of typical product data and should not be used for specification
purposes. All tests are performed at room temperature unless otherwise noted.
Property
Nominal Thickness
Units
mm
Test Method
ASTM D-645
mil
Color
Construction
FRB-WT145
FRB-WT225
0.145
0.225
5.8
8.8
White
White
FRB-NT102 base
with white coating
on both sides
FRB-NT178 base
with white coating
on both sides
Physical Properties
Basis Weight
Density
g/m
2
lb/yd
2
233
351
0.43
0.63
1.6
1.5
UL 94
V-0, 5VA
V-0, 5VA
ASTM D-202
g/cc
Flame Rating (UL File E65069)
Relative Thermal Index, Component,
Electrical
°C
UL 746B
140
140
Relative Thermal Index, Component,
Mechanical without impact
°C
UL 746B
130
130
Reflectance
%
Photovolt Model 577
Reflectance Meter
90
90
Moisture Absorption
%
ASTM D-644
很抱歉,暂时无法提供与“FRB-WT145-8.5X11”相匹配的价格&库存,您可以联系我们找货
免费人工找货