3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
HDC Series
• High density, up to 240 contacts single bay and 366
contacts dual bay
• Early Mate Late Break (EMLB) grounding contacts
for hot swapping
• Mates with three-row and four-row sockets
• See Regulatory Information Appendix (RIA) for
chemical compliance information
Date Modified: March 25, 2008
TS-1136-C
Sheet 1 of 7
Physical
Insulation:
Material: Glass Filled Thermoplastic (LCP)
Flammability: UL 94V-0
Color: Black
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [ 1.27 μm ] min. Nickel
Wiping Area: See Ordering Information
Termination Area: See Ordering Information
Marking: Part Number and Date Code
Electrical
Current Rating: 3.0 A
Insulation Resistance: 1 x 103 M Ω min. at 500 VDC
Withstanding Voltage: 900 VAC for 1 minute
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: Maximum 260°C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
HDC Series
3-Row Single Bay
A
.100
2.54
B
Z
B A H
G
C
F
E
5 6
1
8
7
Z
2
3
4
ROW C
ROW B
ROW A
.480
12.19
.100
2.54
.100
2.54
C
PIN #1
.375
9.52
D
q
.210
5.33
.025
0.64
.275
6.98
.462
11.73
F
.030
0.76
SOLDER TAIL
SECTION Z-Z
PRESS-FIT TAIL
In c h
[m m ]
T o le ra n c e U n le s s N o te d
in c h
.0
.0 0
± .1
± .0 1 ± .0 0 5
.0 0 0
[ ] D im e n s io n s fo r R e fe re n c e
O n ly
O .037 - .043 PLATED-THRU HOLE, PRESS-FIT
O .041-.049 PLATED-THRU HOLE, SOLDER TAIL
l O .004 A B
2X .275
O .120 2 Plcs.
Body footprint
-B-
ROW C
ROW B
ROW A
.100 TYP.
.485
-A.100 TYP.
C
PIN #1
B
A
RECOMMENDED P.C.B. HOLE PATTERN
TS-1136-C
Sheet 2 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
Product Table/Dimensions for 3 Row, Single Bay
Description
A
B
C
D
HDC-H045-31XX-XXXX
45
2.250
[57.15]
1.950
[49.53]
1.400
[35.56]
1.550
[39.37]
HDC-H072-31XX-XXXX
72
3.150
[80.01]
2.850
[72.39]
2.300
[58.42]
2.300
[62.23]
HDC-H075-31XX-XXXX
75
3.250
[82.55]
2.950
[74.93]
2.400
[60.96]
2.550
[64.77]
90
3.750
[95.25]
3.450
[87.63]
2.900
[73.66]
3.050
[77.47]
HDC-H096-31XX-XXXX
96
3.950
[100.33]
3.650
[92.71]
3.100
[78.74]
3.250
[82.55]
HDC-H102-31XX-XXXX
102
4.150
[105.41]
3.850
[97.79]
3.300
[83.82]
3.450
[87.63]
120
4.750
[120.65]
4.450
[113.03]
3.900
[113.03]
4.050
[102.87]
135
5.250
[133.35]
4.950
[125.73]
4.400
[111.76]
4.550
[115.57]
HDC-H120-31XX-XXXX
HDC-H135-31XX-XXXX
Pin
Quantity
A
B
C
D
HDC-H150-31XX-XXXX
150
5.750
[146.05]
5.450
[138.43]
4.900
[124.46]
5.050
[128.27]
HDC-H165-31XX-XXXX
165
6.250
[158.75]
5.950
[151.13]
5.400
[137.16]
5.550
[140.97]
HDC-H180-31XX-XXXX
180
6.750
[171.45]
6.450
[163.83]
5.900
[149.86]
6.050
[153.67]
HDC-H195-31XX-XXXX
195
7.250
[184.15]
6.950
[176.53]
6.400
[162.56]
6.550
[166.37]
HDC-H210-31XX-XXXX
210
7.750
[196.85]
7.450
[189.23]
6.900
[175.26]
7.050
[179.07]
HDC-H225-31XX-XXXX
225
8.250
[209.55]
7.950
[201.93]
7.400
[187.96]
7.550
[191.77]
HDC-H228-31XX-XXXX
228
8.350
[212.09]
8.050
[204.47]
7.500
[190.50]
7.650
[194.31]
HDC-H240-31XX-XXXX
240
8.750
[222.25]
8.450
[214.63]
7.900
[200.66]
8.050
[204.47]
Description
Pin
Quantity
HDC-H090-31XX-XXXX
HDC Series
Plating Description
Ordering Information
HDC - HXXX - XXXX - XXXX
Plating Chart (S1 & P1 Termination Styles ONLY)
Pin Quantity:
See Table
Row Options
3 = 3 Rows
4 = 4 Rows
Insulator Options
1 = Single bay
insulator
2 = Dual bay
insulator
Termination Style / Lead length - Dim. F
P1 - Press-fit / 0.200″ (5.08)
P2 - Press-fit / 0.533″ (13.54)
S1 - Solder Tail / 0.190″ (4.83)
Plating
Options:
(See Plating
Chart)
Plating
Suffix
Press-Fit
Terminations
Solder Tail
Terminations
TR
(RIA E2 & C2
apply)
(RIA E3 & C2
apply)
TG30
(RIA E2 & C2
apply)
(RIA E3 & C2
apply)
HM
(RIA E1 & C1
apply)
(RIA E1 & C1
apply)
KR
(RIA E1 & C1
apply)
(RIA E1 & C1
apply)
Plating
Suffix
Press-Fit
Terminations
Plating composition
3 μ” [0.08 μm] Min. Au over
7 μ” [0.18 μm] PdNi area 1
100 μ” [2.54 μm] Min. Tin Lead area 4
50 μ” [1.27 μm] Min. Ni all over
30 μ” [0.76 μm] Min. Au Area 1
100 μ” [2.54 μm] Min. Tin Lead Tail Area 4
50 μ” [1.27 μm] Min. Ni all over
3 μ” [0.08 μm] Min Au on Area 1
7 μ” [0.18 μm] PdNi on area 1
100 μ” [2.54 μm] Min. Whisker Mitigating
Matte Tin on Area 4
50 μ” [1.27 μm] Min. Ni all over
30 μ” [0.76 μm] Min. Au on Area 1
100 μ” [5.08 μm] Min. Whisker Mitigating
Matte Tin on Area 4
50 μ” [1.27 μm] Min. Ni all over
Plating Chart (P2 Termination Styles ONLY)
Solder Tail
Terminations
GG30
(RIA E2 & C2
apply)
(RIA E3 & C2
apply)
RR
(RIA E2 & C2
apply)
(RIA E3 & C2
apply)
Plating composition
30 μ” [0.76 μm] Min. Au on area 1
10 μ” [0.25 μm] Min. Au on area 2
100 μ” [2.54 μm] Min Tin Lead on area 3
50 μ” [1.27 μm] Ni all over
30 μ” [0.76 μm] Min. Au on area 1
10 μ” [0.25 μm] Min. Au on area 2
100 μ” [2.54 μm] Min Tin Lead on area 3
50 μ” [1.27 μm] Ni all over
TS-1136-C
Sheet 3 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
Inch
[mm]
Product Table/Dimensions for 3 Row, Dual Bay
Tolerance Unless Noted
Inch
HDC Series
.0
.00
.000
±.1
±.01
±.005
[ ] Dimensions for
Reference only
Description
Pin
Quantity
HDC-H228-32XX-XXXX
228
HDC-H240-32XX-XXXX
240
HDC-H258-32XX-XXXX
258
HDC-H276-32XX-XXXX
276
HDC-H294-32XX-XXXX
294
HDC-H312-32XX-XXXX
312
HDC-H330-32XX-XXXX
330
HDC-H348-32XX-XXXX
348
HDC-H366-32XX-XXXX
366
A
B
C
D
E
8.650
[219.71]
9.050
[229.87]
9.650
[245.11]
10.250
[260.35]
10.850
[275.59]
11.450
[290.83]
12.050
[306.07]
12.650
[321.31]
13.250
[336.55]
8.350
[212.09]
8.750
[222.25]
9.350
[237.49]
9.950
[252.73]
10.550
[267.97]
11.150
[283.21]
11.750
[298.45]
12.350
[313.69]
12.950
[328.93]
7.800
[198.12]
8.200
[208.28]
8.800
[223.52]
9.400
[238.76]
10.000
[254.00]
10.600
[269.24]
11.200
[284.48]
11.800
[299.72]
12.400
[314.96]
7.950
[201.93]
8.350
[212.09]
8.950
[227.33]
9.550
[242.57]
10.150
[257.81]
10.750
[273.05]
11.350
[288.29]
11.950
[303.53]
12.550
[318.77]
3.700
[93.98]
3.900
[99.06]
4.200
[106.68]
4.500
[114.30]
4.800
[121.92
5.100
[129.54]
5.400
[137.16]
5.700
[144.78]
6.000
[152.40]
TS-1136-C
Sheet 4 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
HDC Series
4-Row Single Bay
TS-1136-C
Sheet 5 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
HDC Series
Product Table/Dimensions for 4-Row, Single Bay
Description
Pin
Quantity
HDC-H060-41XX-XXXX
60
HDC-H076-41XX-XXXX
76
HDC-H080-41XX-XXXX
80
HDC-H100-41XX-XXXX
100
HDC-H120-41XX-XXXX
120
HDC-H128-41XX-XXXX
128
HDC-H140-41XX-XXXX
140
HDC-H160-41XX-XXXX
160
HDC-H168-41XX-XXXX
168
HDC-H180-41XX-XXXX
180
HDC-H200-41XX-XXXX
200
HDC-H216-41XX-XXXX
216
HDC-H220-41XX-XXXX
220
HDC-H240-41XX-XXXX
240
HDC-H260-41XX-XXXX
260
HDC-H280-41XX-XXXX
280
HDC-H300-41XX-XXXX
300
HDC-H320-41XX-XXXX
320
A
B
C
D
2.250
[57.15]
2.650
[67.31]
2.750
[69.85]
3.250
[82.55]
3.750
[95.25]
3.950
[100.33]
4.250
[107.95]
4.750
[120.65]
4.950
[125.73]
5.250
[133.35]
5.750
[146.05]
6.150
[156.21]
6.250
[158.75]
6.750
[171.45]
7.250
[184.15]
7.750
[196.85]
8.250
[209.55]
8.750
[222.25]
1.950
[49.53]
2.350
[59.69]
2.450
[62.23]
2.950
[74.93]
3.450
[87.63]
3.650
[92.71]
3.950
[100.33]
4.450
[113.03]
4.650
[118.11]
4.950
[125.73]
5.450
[138.43]
5.850
[148.59]
5.950
[151.13]
6.450
[163.83]
6.950
[176.53]
7.450
[189.23]
7.950
[209.55]
8.450
[214.63]
1.400
[49.53]
1.800
[45.72]
1.900
[48.26]
2.400
[60.96]
2.900
[73.66]
3.100
[78.74]
3.400
[86.36]
3.900
[99.06]
4.100
[104.14]
4.400
[111.76]
4.900
[124.46]
5.300
[134.62]
5.400
[137.16]
5.900
[149.86]
6.400
[162.56]
6.900
[175.26]
7.400
[187.96]
7.900
[200.66]
1.550
[39.37]
1.950
[49.53]
1.900
[52.07]
2.550
[60.96]
3.050
[87.63]
3.250
[82.55]
3.550
[90.17]
4.050
[102.87]
4.250
[107.95]
4.550
[115.57]
5.050
[128.27]
5.450
[138.43]
5.550
[140.97]
6.050
[149.86]
6.550
[166.37]
7.050
[179.07]
7.550
[191.77]
8.050
[204.47]
Product Table/Dimensions for 4-Row, Dual Bay
Description
Pin Quantity
A
B
C
D
E
HDC-H320-42XX-XXXX
320
HDC-H344-42XX-XXXX
344
HDC-H352-42XX-XXXX
352
HDC-H360-42XX-XXXX
360
HDC-H368-42XX-XXXX
368
HDC-H392-42XX-XXXX
392
HDC-H416-42XX-XXXX
416
HDC-H440-42XX-XXXX
440
HDC-H464-42XX-XXXX
464
HDC-H488-42XX-XXXX
488
9.050
[229.87]
9.650
[245.11]
9.850
[250.19]
10.050
[255.27]
10.250
[260.35]
10.850
[275.59]
11.450
[290.83]
12.050
[306.07]
12.650
[321.31]
13.250
[336.55]
8.750
[222.25]
9.350
[237.49]
9.550
[242.57]
9.750
[247.65]
9.950
[252.73]
10.550
[267.97]
11.150
[283.21]
11.750
[298.45]
12.350
[313.69]
12.950
[328.93]
8.200
[208.28]
8.800
[237.49]
9.000
[228.60]
9.200
[233.68]
9.400
[238.76]
10.000
[254.00]
10.600
[269.24]
11.200
[284.48]
11.800
[299.72]
12.400
[314.96]
8.350
[212.09]
8.950
[237.49]
9.150
[232.41]
9.350
[237.49]
9.550
[242.57]
10.150
[257.81]
10.750
[273.05]
11.350
[288.29]
11.950
[303.53]
12.550
[318.77]
3.900
[99.06]
4.200
[106.68]
4.300
[109.22]
4.400
[111.76]
4.500
[114.30]
4.800
[121.92]
5.100
[129.54]
5.400
[137.16]
5.700
[144.78]
6.000
[152.40]
TS-1136-C
Sheet 6 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ HDC Header
.100” Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit
HDC Series
4-Row Dual Bay
TS-1136-C
Sheet 7 of 7
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
legal theory asserted.
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217A-D
3M is a trademark of 3M Company.
