HDCW-80/25-750

Page 1 of 1 Heat Shrink HDCW Wraparound Cable Repair Sleeve Data Sheet __________________________________________________________________________________ Product Description The HDCW Wraparound Heat Shrink Cable Repair Sleeve is designed to repair damaged cable sheaths. It is also suitable for use with cable joints and as additional corrosion protection on undamaged cables. Quick and easy to apply, it provides maximum protection against mechanical stress, even in the most aggressive environments. The inner wall of the sleeve is coated with hot melt adhesive to achieve a safe and watertight bond with the cable and give a perfect seal when heat is applied, while a corrosion proof metal clip is used to fully close the sleeve. Heat shrinkable Cable Repair Sleeves are available in a range of sizes to fit cable diameters from 10 - 140mm and in four lengths from 250 – 1000mm. Application Range Cable diameter max/min (mm) Expanded Inner Diameter (mm) Recovered Inner Diameter (mm) 35/10 50 8 55/15 75 13 80/25 100 23 110/30 132 25 140/40 145 32 Key Features and Benefits Feature Benefit Heat shrink technology Easy to install Less applied costs Thick wall sheet Reliable and tough Saves down time No open cable needed Quick installation Selected adhesive system Good bonding to PE and PVC Applications HDCW is ideal to quickly and safely repair damaged cable sheaths. It may also be used with joints and as additional corrosion protection on undamaged cables. Technical Information HDCW is made from modified cross-linked polyolefin with a hot-melt adhesive coated to the inner side of the sleeve. Upon heating, the sleeve shrinks and the adhesive melts, thereby achieving a safe and watertight bond between the sleeve and the cable. A corrosion proof metal clip is used to fully close the sleeve. Reference Number Length (mm) HDCW 35/10–250 HDCW 35/10-500 HDCW 35/10-750 HDCW 35/10-1000 HDCW 55/15-250 HDCW 55/15-500 HDCW 55/15-750 HDCW 55/15-1000 HDCW 80/25-250 HDCW 80/25-500 HDCW 80/25-750 HDCW 80/25-1000 HDCW 110/30-250 HDCW 110/30-500 HDCW 110/30-750 HDCW 110/30-1000 HDCW 140/40-250 HDCW 140/40-500 HDCW 140/40-750 HDCW 140/40-1000 250 500 750 1000 250 500 750 1000 250 500 750 1000 250 500 750 1000 250 500 750 1000 Minimum Recovered Wall Thickness (mm) 2.0 2.0 2.0 2.0 1.8 Important Notice Technical information provided by 3M is based on experience and/or tests believed to be reliable, but their accuracy is not guaranteed and the results may not be relevant to every user’s application. For this reason 3M does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s liability for death or personal injury arising from its negligence. All questions of liability relating to 3M products are governed by the seller’s terms of sale subject where applicable to the prevailing law. If any goods supplied or processed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the price paid for the goods or services. Except as set our above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. 3M is a trademark of the 3M Company. Printed in the UK. © 3M United Kingdom PLC, 2003 __________________________________________________________________________________________ 3M UK PLC Electrical Products 3M Centre, Cain Road Bracknell, Berkshire RG12 8HT Telephone: 01344 858616 Fax: 01344 858758 3M Ireland Sales Office 3M House, Adelphi Centre Dun Laoghaire, Co Dublin, Ireland Telephone: 353 1 280 3555 Fax: 353 1 280 3509 3M UK PLC Sales Office PO Box 393 Bedford MK41 0YE Telephone: 01234 229462 Fax: 01234 229433