HF759/15SF

8 TM 3M 7 6 5 4 3 1 NOTES ROUND JACKETED, FLAT CABLE, HF759 SERIES .050" 28 AWG STRANDED, MASS TERMINATED, HALOGEN FREE PO/PO 2.4 61 REF. SPLIT 1.0 25 REF. BONDED D 2 POLYESTER FILM 1. REGULATORY INFORMATION: VISIT 3M.com/regs OR CONTACT YOUR 3M REPRESENTATIVE TO FIND THE RoHS COMPLIANCE STATUS OF THE 3M PART YOU ARE INTERESTED IN. * LOW SMOKE ZERO HALOGEN (LSZH) INSULATION. ADVANTAGES OF LSZH INSULATION ARE THE LOW SMOKE (IEC 61034-2-2005) AND LOW TOXICITY OF COMBUSTION GASES (NF X 70-100-2-2006), REDUCING THE RISK TO FIREFIGHTERS AND REDUCING THE SOOT AND CORROSION DAMAGE TO NEARBY EQUIPMENT. * ROUND CONSTRUCTION PERMITS MORE EASY ROUTING. * 28 AWG WIRE ON .050 INCH CENTERS PERMITS MASS TERMINATION TO BROAD LINE OF IDC CONNECTORS. PAPER (MFG OPTION) CONDUCTORS 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 3 BLUE MARKING ON ONE EDGE OF PRIMARY CABLE DESIGNATES WIRE #1. 4 DIMENSION "B" PERTAINS TO BONDED AREA ONLY. * CONTINUOUS SPLIT/BOND REPEAT ALLOWS FOR MASS TERMINATIONS OF IDC CONNECTORS. DIM. "B" SEE NOTE 4 DIM. "A" PO PRIMARY INSULATION * PRIMARY CABLE IS ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATION. D PO JACKET POLYESTER FILM .035 .005 [.89] PO JACKET THICKNESS .050 PO PRIMARY INSULATION 1.27 TYP. C 2 JACKET MATERIAL: COLOR: PRIMARY MATERIAL: COLOR: ORDERING INFORMATION HF759/XX XX XX BLANK = STANDARD SF = SPLICE FREE F ELECTRICAL: CHARACTERISTIC IMPEDANCE: CAPACITANCE: INDUCTANCE: PROPAGATION DELAY: VELOCITY OF PROPAGATION: UNBALANCED 75 22.6 pF/ft [74.3 pF/m] .13 H/ft [.43 H/m] 1.69 ns/ft [5.54 ns/m] 60% DRAWING NUMBER VOLTAGE RATING: USA 150V CANADIAN 150V EU: 1 X 10 /10ft. [3m] BALANCED 136 12.4 pF/ft [40.6 pF/m] .23 H/ft [.75 H/m] 1.69 ns/ft [5.54 ns/m] 60% B NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. BALANCED IS MEASURED BETWEEN CONDUCTORS WITHIN A PAIR. "MEASURED VALUES ARE TYPICAL" 3M PART DIM. "B" DIM. "A" NUMBER SEE NOTE 4 HF759/09 0.26 [6.6] 0.40 [10.2] HF759/10 0.26 [6.6] 0.45 [11.4] HF759/14 0.27 [6.9] 0.65 [16.5] HF759/15 0.27 [6.9] 0.70 [17.8] HF759/16 0.27 [6.9] 0.75 [19.1] HF759/20 0.30 [7.6] 0.95 [24.1] HF759/24 0.33 [8.4] 1.15 [29.2] HF759/25 0.33 [8.4] 1.20 [30.5] HF759/26 0.33 [8.4] 1.25 [31.8] HF759/30 0.37 [9.4] 1.45 [36.8] HF759/34 0.37 [9.4] 1.65 [41.9] HF759/36 0.39 [9.9] 1.75 [44.5] HF759/37 0.39 [9.9] 1.80 [45.7] HF759/40 0.39 [9.9] 1.95 [49.5] HF759/50 0.44 [11.2] 2.45 [62.2] HF759/60 0.47 [11.9] 2.95 [74.9] HF759/64 0.50 [12.7] 3.15 [80.0] 2 ENVIRONMENTAL: TEMPERATURE RATING: -40 C TO +105 C (EIA-364-32G, METHOD A, TEST CONDITION 2) -10 C TO +75 C (UL TEMPERATUE RATING) FLAMMABILITY RATING: INTERNAL: HORIZONTAL FLAME PER UL758 EXTERNAL: CABLE FLAME (VERTICAL) PER UL758 HALOGEN FREE IS DEFINED AS BOTH 1) NO HALOGN COMPOUNDS THAT ARE INTENTIONALLY ADDED TO THE PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT AND 2) ANY IMPURITIES PRESENT ARE LESS THAN 900ppm BROMINE, LESS THAN 900ppm CHLORINE AND/OR LESS THAN 1500ppm TOTAL BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTIAN INDUSTRY STANDARDS FOR PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21 STANDARDS. THIS INFORMATION REPRESENTS 3M'S KNOWLEDGE AND BELIEF WHICH MAY BE BASED IN WHOLE OR IN PART ON INFORMATION PROVIDED BY 3RD PARTY SUPPLIERS TO 3M. F 86110 E 79568 JUL 31,2018 JNC BM DRFT CHKD REVISED & REDRAWN DESIGN REFERENCE A NEXT ASSEMBLY DIVISION REV DO NOT SCALE DRAWING UL FILE NO: E42769 STYLE NO: 22170 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 INCH [MM] TOLERANCE - UNLESS NOTED .X .XX .XXX INCH .1 .05 .010 [] = DIM. FOR REFERENCE ONLY DATE CASTIGLIONE JUN 14,2018 CHKD DATE C 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE INCHES THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 6 ISSUE DATE AND DESCRIPTION DIVISION CODE R 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect ECO DRFT EMSD 7 JNC SAN REVISSE NOTES ACCESS CODES 8 AUG 19,2019 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE B. MIZE JUN 14,2018 3M COPYRIGHT 2019 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE ROUND JACKETED, FLAT CABLE, HF759 SERIES, HALOGEN FREE CAGE SIZE NUMBER MODEL HF759 DRAWING NO. REV. 78-5100-2336-5 DET. LISTS 1 YES NO F SHT 1 OF 2 Imaged: Central Standard Time 8/23/2019 -- UTC Offset (hrs) 6 2 NOTE: AVAILABLE IN STANDARD 275FT ROLLS. CONTACT 3M FOR AVAILABILITY OF ADDITIONAL CONDUCTOR COUNTS AND/OR CUSTOM ROLL LENGTHS. NUMBER OF CONDUCTORS 9 10 14 15 16 20 24 25 26 30 34 36 37 40 50 60 64 .127] TINNED STRANDED COPPER REVISION MARKING: STANDARD: NONE CONDUCTORS: 28 AWG, 7 X 36 AWG [7 X SHIELDING: POLYESTER FILM BLANK = STANDARD SO = CONTINUOUSLY BONDED WIRE (NO SPLIT) B HALOGEN FREE POLYOLEFIN (PO) DARK GRAY HALOGEN FREE POLYOLEFIN (PO) DARK GRAY 78-5100-2336-5 NUMBER OF CONDUCTORS (SEE TABLE 1) C PHYSICAL: A 8 7 6 5 4 3 2 1 3MTM ROUND JACKETED, FLAT CABLE, HF759 SERIES .050" 28 AWG STRANDED, MASS TERMINATED, HALOGEN FREE PO/PO D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C F REVISION Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. DRAWING NUMBER 78-5100-2336-5 Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3M Company Electronics Materials Solutions Division 13011 McCallen Pass, Bldg. C Austin, TX 78753-5380 1-800-225-5373 www.3M.com/interconnect B B F 86110 AUG 19,2019 JNC SAN REVISSE NOTES E 79568 JUL 31,2018 JNC BM DRFT CHKD REVISED & REDRAWN DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION REV 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3M.com/interconnect CASTIGLIONE JUN 14,2018 CHKD DATE DIVISION CODE C 8 INCHES INTERPRET PER ASME Y14.5 - 2009 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE THIRD ANGLE PROJECTION 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 ISSUE DATE AND DESCRIPTION DATE EMSD DO NOT SCALE DRAWING ECO DRFT 2 .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .000 ANGLES MN 55144 MFG DATE APPVL DATE B. MIZE JUN 14,2018 3M COPYRIGHT 2019 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE ROUND JACKETED, FLAT CABLE, HF759 SERIES, HALOGEN FREE CAGE SIZE NUMBER MODEL HF759 DRAWING NO. REV. 78-5100-2336-5 DET. LISTS 1 YES NO F SHT 2 OF 2 Imaged: Central Standard Time 8/23/2019 -- UTC Offset (hrs) 6 C A