HM-S088FR1-8AP1-TG30

8 7 6 5 4 3 2 1 NOTES * * * * * * * * 3MTM HM PRESS-FIT SOCKET, 8-ROW, HM SERIES FOR HARD METRIC APPLICATIONS MODULAR/SCALABLE FORMAT: IEC 61076-101. 101 MATED LINES PER LINEAR INCH. DUAL BEAM CONTACT CONSTRUCTION FOR HIGH RELIABILITY. FOUR INTEGRATED 8.25A POWER BLADES. MULTI-PURPOSE CENTER (MPC) FOR KEYING AND GUIDANCE. END-TO-END STACKABLE WITH 8 ROW 3MTM, HM AND HSHM PRODUCTS. INTEGRATED GUIDE FINGERS. MATES WITH 3MTM HSHM HEADERS. D 1. MATERIAL: PLASTIC: HIGH TEMP LCP, UL94V-0 CONTACTS: COPPER ALLOY. 2. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY) D 3 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. C C B MECHANICAL: NORMAL FORCE (NOMINAL): ENGAGEMENT FORCE (NOMINAL): SEPARATION FORCE (NOMINAL): WIPE (NOMINAL, SHORTEST CONTACT): MATE/UNMATE CYCLES: APPLICATION: B 3 HM-S088FL1-8AP1 HM-S176DPWR1-8AP1 HM-S088FR1-8AP1 SOCKET POSITION AND TYPE .57N [58g] SIGNAL .32N [33g] SIGNAL .20N [20g] SIGNAL 2.67 [.105] SIGNAL 250 THIS MODULE IS NOT SUITABLE FOR STAND-ALONE USE. ELECTRICAL: ENVIRONMENTAL: TEMPERATURE RATING: -55 C TO 125 C B DIMENSIONS: MM [INCHES] DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES DIVISION DO NOT SCALE DRAWING TG50 = 1.27 M [50 IN] MIN. GOLD ON CONTACT AREA, LUBRICATED 2.54 M [100 IN] MIN. TIN/LEAD ON TERMINAL AREA (RIA C2 & E3 APPLY) 1.27 M [50 IN] MIN. NICKEL ALL OVER. NON-STANDARD OPTION (AVAILABLE WITH LONGER LEAD TIMES AND HIGHER MAKE ORDER QUANTITIES, MOQ) R UL FILE NO: E68080 3 1 THIRD ANGLE PROJECTION ALL SURFACES MARKED ONLY 6 5 4 39778 3 REV MAR 23,2012 ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE MAR 23,2012 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE MAX SURFACE ROUGHNESS 7 A DIVISION CODE INTERPRET PER ASME Y14.5 - 1994 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 JNC TS JNC TS DRFT CHKD PRODUCTION RELEASE Interconnect Solutions 3MTM ELECTRONIC SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com OCT 07,2013 REMOVED KR PLATING. REVISE RIA CALLOUT TG30 = .76 M [30 IN] MIN. GOLD ON CONTACT AREA 2.54 M [100 IN] MIN. TIN/LEAD ON TERMINAL AREA (RIA C2 & E3 APPLY) 1.27 M [50 IN] MIN. NICKEL ALL OVER. STANDARD OPTION. A 50345 2 INCHES .0 .00 .01 .000 .005 .0000 MILLIMETERS 0 .0 .3 .00 .13 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA MAR 26,2012 3M COPYRIGHT 2012 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE HM PRESS-FIT 8-ROW SOCKET CONNECTORS, HM SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2516-2 DET. LISTS 1 YES NO B SHT 1 OF 4 Imaged: B.1 10/7/2013 2:10 PM UTC-05:00 PLATING: TG30L = .76 M [30 IN] MIN. GOLD ON CONTACT AREA, LUBRICATED 2.54 M [100 IN] MIN. TIN/LEAD ON TERMINAL AREA (RIA C2 & E3 APPLY) 1.27 M [50 IN] MIN. NICKEL ALL OVER. TYPICALLY HIGHER MAKE ORDER QUANTITIES AS COMPARED TO TG30. 8 B CURRENT RATING (FULLY LOADED): 1A @ 70 C SIGNAL INSULATION RESISTANCE: 1 X 104 MO @ 100 VDC WITHSTANDING VOLTAGE: 750VRMS 3 ORDERING INFORMATION HM-SXXXXX1-8AP1-XXXXX 78-5100-2516-2 3 REVISION HM-S176D1-8AP1 HM-S200DE1-8AP1 DRAWING NUMBER HM-S200E1-8AP1 A 8 7 6 5 4 3 2 1 3MTM HM PRESS-FIT SOCKET, 8-ROW, HM SERIES FOR HARD METRIC APPLICATIONS D D 50.00 1.969 50.00 1.969 46.00 1.811 48.00 1.890 24X 2.00 .079 24X 2.00 .079 I H H G G F E E D .685 D C C B B A A Z 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 7 6 5 4 3 2 2.00 .079 23X 2.00 .079 .079 Z 2.00 1 .079 7X 7X 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2.00 .079 23X 2.00 .079 7X 7X 46.00 1.811 46.00 1.811 HM-S200E1-8AP1 B 2.00 8 HM-S200DE1-8AP1 B REVISION .685 C F 17.40 DRAWING NUMBER 17.40 78-5100-2516-2 C I B 22.40 .882 16.95 50.00 1.969 .667 20X 2.00 .079 8.80 I 3.30 .346 H 1.50 G .059 F 17.40 A .685 E 10.70 D .421 B 3.70 50345 OCT 07,2013 A 39778 MAR 23,2012 TAILS DESIGN REFERENCE 7X NEXT ASSEMBLY ACCESS CODES DIVISION B REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE MAR 23,2012 CHKD DATE 11 10 9 8 7 6 5 2.00 .079 7X 18X 2.00 .079 4 3 2 1 DO NOT SCALE DRAWING TYPICAL SIDE VIEW DIMENSIONS FOR THE SOCKETS ON THIS DRAWING 2.00 3 1 THIRD ANGLE PROJECTION 7X INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS HM-S176D1-8AP1 7 ALL SURFACES MARKED ONLY 6 5 4 3 C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE .079 46.00 1.811 8 DIVISION CODE Interconnect Solutions Z 25 24 23 22 21 20 19 18 17 16 15 JNC TS DRFT CHKD PRODUCTION RELEASE C A TS REMOVED KR PLATING. REVISE RIA CALLOUT .146 .130 JNC 2 INCHES .0 .00 .01 .000 .005 .0000 MILLIMETERS 0 .0 .3 .00 .13 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA MAR 26,2012 3M COPYRIGHT 2012 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE HM PRESS-FIT 8-ROW SOCKET CONNECTORS, HM SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2516-2 DET. LISTS 1 YES NO B SHT 2 OF 4 Imaged: B.1 10/7/2013 2:10 PM UTC-05:00 48.00 1.890 A 8 7 6 5 4 3 2 1 3MTM HM PRESS-FIT SOCKET, 8-ROW, HM SERIES FOR HARD METRIC APPLICATIONS D D 25.00 .984 50.00 1.969 46.00 1.811 20.00 .787 18X 2.00 .079 10X 2.00 .079 P2 P1 I I H H G G F .685 D E .685 D C C B B A A Z 2.00 25 24 23 22 21 20 19 18 17 16 15 .079 P4 P3 11 10 9 8 7 6 5 4 3 2 1 Z 11 10 9 2.00 8 7 6 5 4 3 2 1 7X 2.00 .079 2.00 .079 20X 2.00 .079 .079 9X 2.00 .079 7X 7X C 7X 48.00 1.890 B 18.00 .709 78-5100-2516-2 HM-S176DPWR1-8AP1 HM-S088FL1-8AP1 B REVISION E F 17.40 DRAWING NUMBER C 17.40 B 25.00 .984 20.00 .787 10X 2.00 .079 H B 50345 OCT 07,2013 G E .685 D A 39778 MAR 23,2012 DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES B REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE MAR 23,2012 CHKD DATE A DIVISION Z 11 10 9 8 7 6 5 4 3 2 1 7X 2.00 .079 DIVISION CODE Interconnect Solutions 2.00 DO NOT SCALE DRAWING .079 3 1 THIRD ANGLE PROJECTION 18.00 .709 INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS HM-S088FR1-8AP1 ALL SURFACES MARKED ONLY 8 7 6 5 4 3 C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE 7X 9X 2.00 .079 JNC TS DRFT CHKD PRODUCTION RELEASE C A TS REMOVED KR PLATING. REVISE RIA CALLOUT F 17.40 JNC 2 INCHES .0 .00 .01 .000 .005 .0000 MILLIMETERS 0 .0 .3 .00 .13 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA MAR 26,2012 3M COPYRIGHT 2012 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE HM PRESS-FIT 8-ROW SOCKET CONNECTORS, HM SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2516-2 DET. LISTS 1 YES NO B SHT 3 OF 4 Imaged: B.1 10/7/2013 2:10 PM UTC-05:00 I A 8 7 6 5 4 3 2 1 3MTM HM PRESS-FIT SOCKET, 8-ROW, HM SERIES FOR HARD METRIC APPLICATIONS B B 48.00 1.890 48.00 1.890 D 24X 200X DIM. "D" .10 2X 2.00 20X 20.00 .079 .787 .079 176X D 2.00 DIM. "D" A B C .10 I, Z 7X 1.50 .059 A B C I, Z H H G F E D C B G F E D C B 7X 10.50 1.50 .059 .413 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 .413 A A C 10.50 C 1 25 24 23 22 21 20 19 18 17 16 15 11 10 9 8 7 6 5 4 3 2 1 1.50 HM-S200E1-8AP1 HM-S200DE1-8AP1 1.50 .059 HM-S176D1-8AP1 A .059 EDGE OF PC BOARD EDGE OF PC BOARD C A C B 48.00 1.890 B 23.00 .906 DIM. "D" 20.00 .787 20.00 20X .787 4X .079 2.00 88X .079 2.00 .079 .10 7X G F E D C B .472 10.50 B 6.00 25 24 23 22 21 20 19 18 17 16 15 11 10 9 8 7 6 5 4 3 2 G F E D C B 1.50 .413 C .059 22.50 .886 1.50 11 10 9 8 7 6 5 4 3 2 1 A B C .059 A A EDGE OF PC BOARD EDGE OF PC BOARD 23.50 .925 B 1.50 .059 DIM. "B" .10 .413 1 1.50 14X 10.50 A .236 7X A B C .059 A C 2.00 .079 I, Z H I, Z H 12.00 10X DIM. "D" B 3X 2.00 REVISION 2X A B C DRAWING NUMBER .10 78-5100-2516-2 176X HM-S088FL1-8AP1 HM-S088FR1-8AP1 RECOMMENDED PCB MOUNTING HOLE PATTERN (VIEWED FROM COMPONENT SIDE) B 50345 OCT 07,2013 JNC TS JNC TS DRFT CHKD REMOVED KR PLATING. REVISE RIA CALLOUT A 39778 MAR 23,2012 PRODUCTION RELEASE DESIGN REFERENCE NEXT ASSEMBLY ACCESS CODES A DIVISION HOLE PLATING TABLE HOLE (FINISHED HOLE) Cu THICKNESS SnPb THICKNESS DRILLED HOLE DIA. DIM. "B" .690-.790 [.0270-.0310] .025-.045 [.0010-.0018] .008-.018 [.0003-.0007] .810-.860 [.0320-.0340] DIM. "D" .550-.650 [.0217-.0256] .025-.045 [.0010-.0018] .008-.018 [.0003-.0007] .686-.727 [.0270-.0286] 3 1 THIRD ANGLE PROJECTION INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS MARKED ONLY 7 6 5 4 3 ISSUE DATE AND DESCRIPTION DATE CASTIGLIONE MAR 23,2012 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE ALL SURFACES 8 ECO DRFT DIVISION CODE Interconnect Solutions DO NOT SCALE DRAWING REV 2 INCHES .0 .00 .01 .000 .005 .0000 MILLIMETERS 0 .0 .3 .00 .13 .000 ANGLES MN 55144 MFG DATE APPVL DATE T. SUNIGA MAR 26,2012 3M COPYRIGHT 2012 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE HM PRESS-FIT 8-ROW SOCKET CONNECTORS, HM SERIES CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2516-2 DET. LISTS 1 YES NO B SHT 4 OF 4 Imaged: B.1 10/7/2013 2:10 PM UTC-05:00 HM-S176DPWR1-8AP1 A