HM-S110APWR1-5AP1-TG30L 数据手册
3M™ MetPak™ HM Press-Fit Power Socket
2 mm Type A, 110/4 Signal/Power Contacts, 5 Rows, Right Angle
HM Series
•
•
•
•
Modular/scalable format IEC 61076-4-101
63 mated lines per linear inch
Dual beam contact construction for high reliability
End-to-end stackable with 5 row 3M™ MetPak™ CP2,
HM and HSHM Products
• Mates with 3M™ MetPak™ HSHM headers
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3mconnector.com for compliance information
Date Modified: November 22, 2010
TS-2088-B
Sheet 1 of 3
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0
Color:
Material: Copper Alloy
Plating: See Ordering information
Marking: 3M Logo, Part Number, Revision, Date Code
Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.98 N [100 g] Power
Engagement Force (Nominal): 0.32 N [33 g] Signal, 1.42 N [145 g] Power
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.89 N [91 g] Power
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.93 mm [.076 in] Power
Mate/Unmate Cycles: 250
Application: This module is suitable for stand-alone use.
Limited capture of 0.75 mm in longitudinal and 1.00 mm transverse directions.
Electrical:
Current Rating (Fully Loaded): 1 A @ 70° C Signal, 8.25 A @ 70°C Power
Insulation Resistance: 1 x 104 MΩ @ 100 VDC
Withstanding Voltage: 750 Vrms
Environmental
Temperature Rating: -55° C to 125° C
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
MetPak is a trademark of 3M Company.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ HM Press-Fit Power Socket
2 mm Type A, 110/4 Signal/Power Contacts, 5 Rows, Right Angle
HM Series
21.80
.858
20.40
.803
mm
(Inch)
Tolerance Unless Noted
HM-SXXXXX-5AP1-XXXXX
REV X
XXYY
2.50
.098
50.00
1.969
48.00
1.890
2.00
.079
mm
0.0 0.00
±0.3 ±0.13
[ ] Dimensions for
Reference Only
P2 P1
ROW E
ROW C
2.00
.079
8.70
.343
7.25
.285
ROW D
ROW B
ROW A
25
24 23
22 21 20
19
18 17 16 15
P4 P3
11
10 9
8
7
6
5
4
3
2
1
8.80
.346
10.70
.421
46.00
1.811
6.50
.256
0
±3
2.50
.098
3.30
.130
5.00
.197
Boxed leads are omitted on row differential
pair connectors
Ordering Information
HM-S110APWR1 - 5AP1 - XXXXX
Plating μm [ μ” ]:
TG30 = 0.76 [30] Min. Au Contact Area
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Standard Option
TG30L = 0.76 [30] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Typically higher make order quantities as compared to TG30.
TG50 = 1.27 [50] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Non-Standard Option (Available with longer lead times and higher
make order quantities, MOQ)
TS-2088-B
Sheet 2 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ HM Press-Fit Power Socket
2 mm Type A, 110/4 Signal/Power Contacts, 5 Rows, Right Angle
HM Series
Hole Plating Table
Hole
Finished Hole Dia. “D”
Cu. Thickness
SnPb Thickness
Drilled Hole Dia.
A
0.550-0.650 [.0217-.0256]
0.025-0.045 [.0010-.0018]
0.008-0.018 [.0003-.0007]
0.686-0.727 [.0270-.0286]
B
0.690 - 0.790 [.0270 - .0310]
0.025 - 0.045 [.0010 - .0018]
0.008 - 0.018 [.0003 - .0007]
0.810 - 0.860 [.0320 - .0340]
TS-2088-B
Sheet 3 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
HM-S110APWR1-5AP1-TG30L 价格&库存
很抱歉,暂时无法提供与“HM-S110APWR1-5AP1-TG30L”相匹配的价格&库存,您可以联系我们找货
免费人工找货