HT-752-250-32

Specialty Terminals HT-752-250-32 High Temperature Female Flag Disconnect, Non-Insulated, Butted Seam Data Sheet Product Number Wire Range (AWG) Mates with Male Tab Width (W') x Thickness HT-752-250-32 16-14 0.250 x 0.032 Specifications Wire Size: Barrel Seam: Maximum Operating Temp: Maximum Current: Terminal Material: Plating: L Barrel Length Barrel I.D. 0.51 0.26 0.095 Installation Information 16-14 AWG Copper Butted 900˚F (482˚C) Same as Wire Steel Nickel WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-450 (scissor style) hand tools. Barrel Crimp (Required) Engineering Specification Crimp-type female quick-slide connectors shall, electrically and mechanically, connect permanently to a pre-stripped end of a stranded copper wire, and have a tongue portion with fingers which grip a male disconnect in a separable, reusable manner, forming a quick connect wiring termination. The non-insulated, butted seam, high temperature 0.250˝ female disconnect shall be nickel-plated steel, with a tongue for gripping a 0.250˝ wide x 0.030˝ or 0.032˝ male tab, and a 0.26˝ long butted seam barrel positioned across the closed end of the tongue and sized for a specified (16-14 AWG) wire range. 3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd Litho in USA. © 3M 2002 78-8126-0713-9-A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: HT-752-250-32