MP2-H240-54S1-S-TG30 数据手册
3M™ MetPak™ 2-FB Header
2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
Solder Tail
• End-to-end stackable
• Select load capability
• Monoblockable
• Shoulder Pin
Press Fit
• End-to-end stackable
• Early mate late break for hot swapping (press-fit
EMLB adjusted by application tooling)
• Select load capability
• Monoblockable
• Push-on shoulder pin
• Optional feed-through tail for rear plug-up midplane
applications
• Accepts Universal Tooling
• RoHS Compliant. See the Regulatory Information
Appendix (RIA) in the “RoHS compliance” section
of www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: September 17, 2013
Physical
TS-1120-E
Sheet 1 of 4
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Phosphor Bronze
Plating:
Underplating: 50 µ" [1.27 µm] Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating: Signal: 1.5 A – All contacts simultaneously
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1,000 VAC
Environmental
Temperature Rating: -55°C to +125°C
Process Temperature Rating: 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Header
2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
MP2 Series
POSITION X
2.00
.079
"A" 6.00
.236
POSITION 2
POSITION 1
15.80
.622
FOR SPECIAL MONOBLOCKS
AND PIN ARRANGEMENTS
CONTACT 3M SALES
REPRESENTATIVE
11.50
.453
1.40
.055
2.00
.079
17.00
.669
mm
[inch]
Tolerance Unless Noted
3.50
.138
12.00
.472
mm
4 ROW PRODUCT
0
0.0
0.00
±3
±0.3
±0.13
[ ] Dimensions for
Reference Only
17.80
.701
13.52
.532
MATING LENGTH
"B" TAIL LENGTH
14.00
.551
E D C B A
"C"
ROW
5 ROW PRODUCT
SOLDER TAIL
PRODUCT
PRESS FIT
PRODUCT
PRESS FIT
PRODUCT
REAR
PLUG-UP
Notes:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated
through-hole (PTH) in a printed circuit board, typically a “back plane.”
Contact 3M For Rear Plug-Up Option
Ordering Information
MP2 - HXXX - XXXX - S - XXXXX
Plating Options
(See Table 4)
H = Header
Pin Count
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Shouldered Pins
Tail Length
(See Table 3)
Loading Pattern
(See Table 2)
Termination Style
P = Press-Fit
S = Solder Tail
TS-1120-E
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Header
2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
Table 4 - Plating Options
Table 1 - Connector & Row Lengths
Pin Count
Dim. “A” mm
[inch]
Dim “C” mm
[inch]
MP2 Series
Rows
Plating
Suffix
Press-Fit
Tails*
Solder
Tails
KR
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. Matt Whisker
Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR
(RIA E1 &
C1 apply)
(RIA E1 &
C1 apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. Matt Whisker
Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
KV
for rear
plugup only
(RIA E1 &
C1 apply)
024
11.95 [0.471]
10.00 [0.394]
4
048
23.95 [0.943]
22.00 [0.866]
4
072
35.95 [1.415]
34.00 [1.339]
4
096
47.95 [1.889]
46.00 [1.811]
4
120
59.95 [2.36]
58.00 [2.283]
4
144
71.95 [2.833]
70.00 [2.756]
4
168
83.95 [3.305]
82.00 [3.228]
4
192
95.95 [3.778]
94.00 [3.701]
4
030
11.95 [0.471]
10.00 [0.394]
5
060
23.95 [0.943]
22.00 [0.866]
5
090
35.95 [1.415]
34.00 [1.339]
5
120
47.95 [1.888]
46.00 [1.811]
5
150
59.95 [2.361]
58.00 [2.283]
5
180
71.95 [2.833]
70.00 [2.756]
5
210
83.95 [3.305]
82.00 [3.228]
5
240
95.95 [3.778]
94.00 [3.701]
5
Plating Composition
0.76 µm [30 µ”] Min. Au Primary Contact Area
0.10 µm [4 µ”] Min. Au Needle Eye Area
0.10 µm [4 µ”] Min. Au Secondary Contact Area
1.27 m [50 µ”] Min. Ni all over
Table 3 - Tail Length Options
Plating Suffix
Solder Tail
Press-Fit* Tail
1
1
3
Dim. “B”
4.60 [0.181]
2.72 [0.107]
*Compliant-Pin Tail
Table 2 - Mate Length vs. Loading Pattern
Loading
Pattern
Code
Description
Mate length Row A
Mate length Row B
Mate length Row C
Mate length Row D
Mate length Row E
(5-Row Prod. Only)
1
All Positions Filled
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
2
All Positions Filled
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
3
All Positions Filled
6.50 [0.256]
5.75 [0.226]
5.75 [0.226]
6.50 [0.256]
6.50 [0.256]
4
All Positions Filled
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
5
All Positions Filled
5.75 [0.226]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
5.75 [0.226]
6
All Positions Filled
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
5.75 [0.226]
5.75 [0.226]
7
All Positions Filled
6.50 [0.256]
5.75 [0.226]
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
8
All Positions Filled
6.50 [0.256]
5.00 [0.197]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
9
All Positions Filled
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
5.00 [0.197]
A
All Positions Filled
5.00 [0.197]
5.75 [0.226]
6.50 [0.256]
5.75 [0.226]
5.00 [0.197]
B
All Positions Filled
5.75 [0.226]
5.75 [0.226]
5.75 [0.226]
5.75 [0.226]
5.75 [0.226]
C
All Positions Filled
5.00 [0.197]
5.00 [0.197]
6.50 [0.256]
5.00 [0.197]
5.00 [0.197]
D
All Positions Filled
5.75 [0.226]
5.75 [0.226]
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
E
All Positions Filled
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
G
All Positions Filled
7.25 [0.285]
5.75 [0.226]
5.75 [0.226]
5.00 [0.197]
5.00 [0.197]
H
All Positions Filled
5.00 [0.197]
5.75 [0.226]
5.75 [0.226]
7.25 [0.285]
7.25 [0.285]
J
All Positions Filled
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
K
All Positions Filled
5.00 [0.197]
6.50 [0.256]
7.25 [0.285]
6.50 [0.256]
5.00 [0.197]
TS-1120-E
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Header
2 mm 4/5 Row, Vertical, Solder or Press-Fit Tail, Shouldered Pin
16.00
.630 MIN
12.00
.472
2.00
.079
MP2 Series
1 6 .0 0
. 6 3 0 M IN
2.00
.079
A1
12.00
.472
"C"
"D" PLATED THRU HO LE
Ø 0.10
12.00
.472
2.00
.079
Ø
CENTER HOLES OPTIONAL
FOR 3M PRODUCT
6.00
.236
1.50 +.10
-.00
UNPLATED
.059 +.004
-.000
"D " P L A T E D T H R U H O L E
Ø 0 .1 0
Ø 0.10
RECOMMENDED 4 ROW SOLDER
TAIL PCB HOLE MOUNTING PATTERN
RECOMMENDED 4 ROW PRESS-FIT
Table 5 - HOLE PLATING FINISHES
HOLE
Finished Dia.
MM [in]
Immersion Matte
Sn Thickness
microns [µ”]
Electrolytic Au
Thickness
microns [µ"]
OSP ENTEK
Thickness
microns [µ”]
Drilled Hole
Dia. mm [in]
“D”
0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-.0340] or
0.85 mm [#66] TWIST DRILL
18.00
.709 MIN
14.00
.551
Ø
6.00
.236
2.00
.079
"D " P L A T E D T H R U H O L E
0 .1 0
2.00
.079
A1
12.00
.472
"C"
12.00
.472
"D" PLATED THRU HOLE
Ø 0.10
2.00
.079
Ø
1.50
.059
+.10
-.00
+.004
-.000
UNPLATED
CENTER HOLES OPTIONAL
FOR 3M PRODUCT
1 8 .0 0
.7 0 9 M IN
Ø 0.10
RECOMMENDED 5 ROW SOLDER
TAIL PCB HOLE MOUNTING PATTERN
RECOMMENDED 5 ROW PRESS-FIT
PCB HOLE MOUNTING PATTERN
TS-1120-E
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect
unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will
not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
RIA-2217B-E
MP2-H240-54S1-S-TG30 价格&库存
很抱歉,暂时无法提供与“MP2-H240-54S1-S-TG30”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 3+87.89457
- 15+84.32512