3M™ MetPak™ 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail
MP2 Series
• 6.50 Amps per contact
• Early mate late break (EMLB) for hot swap or
selective loading options
• End-to-end stackable
• Optional feed-through tail (Press-Fit)
• Futurebus+® compatible
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of www.3M.com/
interconnects for compliance information
(RIA E1 & C1 apply)
Date Modified: August 21, 2009
TS-1126-C
Sheet 1 of 4
Physical
Insulation:
Material: High Temperature LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 μ” [1.27 μm] Nickel
Wiping Area: See Ordering Information
Tails: See Ordering Information
Electrical
Current Rating: Power: 6.50 A per power socket contact at 70°C
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1,500 VAC for 60 seconds
Environmental
Temperature Rating: -55° C to 125° C
UL File No.: E68080
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail
MP2 Series
POSITION 2
6.00
.236
11.95
.470
POSITION 1
15.80
.622
11.50
.453
1.40
.055
2.00
.079
3X
17.00
.669
FOR SPECIAL MONOBLOCKS AND
PIN ARRANGEMENTS CONTACT 3M
SALES REPRESENTATIVE
3.50
.138
12.00
.472
4 ROW PRODUCT
mm
(Inch)
Tolerance Unless Noted
ONLY PRESENT ON SOLDER
TAIL PRODUCT
mm
0
±3
0.0
±0.3
0.00
±0.13
( ) Dimensions used for
Reference Only
17.80
.701
13.52
.532
"B" MATING LENGTH
"A" TAIL LENGTH
E D C B A
ROW
Press-Fit
Product
5 Row Product
Note:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical
connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2-HPXX-XXPX- XXXXX
Power Header
Plating Options:
(See Table 4)
Contact Count
(See Table 1)
Rows
4 = 4 Rows
5 = 5 Rows
Tail Length
(See Table 3)
Loading Pattern
(See Table 2)
Termination Style
P = Press-Fit
TS-1126-C
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail
MP2 Series
Table 1
Contact Count
No of Rows
08
4
10
5
Table 2 - Mate Length
Loading Pattern
Code
Description
Mate length
Row A
Mate length
Row B
Mate length
Row C
Mate length
Row D
Mate length
Row E
(5-Row Prod. Only)
1
All Positions Filled
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
2
All Positions Filled
8.00 [0.315]
8.00 [0.315]
7.25 [0.285]
6.50 [0.256]
6.50 [0.256]
3
All Positions Filled
6.50 [0.256]
8.00 [0.315]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
4
All Positions Filled
6.50 [0.256]
7.25 [0.285]
7.25 [0.285]
8.00 [0.315]
8.00 [0.315]
5
All Positions Filled
7.25 [0.285]
8.00 [0.315]
7.25 [0.285]
6.50 [0.256]
6.50 [0.256]
6
All Positions Filled
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
7
All Positions Filled
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
8
All Positions Filled
8.00 [0.315]
6.50 [0.256]
8.00 [0.315]
7.25 [0.285]
7.25 [0.285]
9
All Positions Filled
8.00 [0.315]
7.25 [0.285]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
A
All Positions Filled
8.00 [0.315]
8.00 [0.315]
7.25 [0.285]
7.25 [0.285]
7.25 [0.285]
C
All Positions Filled
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
6.50 [0.256]
6.50 [0.256]
D
All Positions Filled
8.00 [0.315]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
6.50 [0.256]
G
All Positions Filled
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
8.00 [0.315]
5.75 [0.226]
H
All Positions Filled
8.00 [0.315]
8.00 [0.315]
7.25 [0.285]
8.00 [0.315]
8.00 [0.315]
Table 3
Press-Fit Tail Termination
Option No.
Dim. “A”
1
4.60 [0.181]
2
3.86 [0.152]
*Compliant-Pin Tail
Table 4 - Plating
Plating Suffix
Plating Composition
Plating Suffix
Plating Composition
TG
(RIA E2 & C2 apply)
0.25 μm [10 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
FJ
(RIA E1 & C1
apply)
0.25 μm [10 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
TG30
(RIA E2 & C2 apply)
0.76 μm [30 μ”] Min. Au Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
KR
(RIA E1 & C1
apply)
0.76 μm [30 μ”] Min. Au Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
TR30
(RIA E2 & C2 apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
RF
(RIA E1 & C1
apply)
TR40B
(RIA E2 & C2 apply)
0.13 μm [5 μ”] Min. Hard Au Contact Area,
Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
2.54 μm [100 μ”] Min. SnPb Tail Area
1.27 μm [50 μ”] Min. Ni all over
LR
(RIA E1 & C1
apply)
0.08 μm [3 μ”] Min. Au Contact Area
0.67 μm [27 μ”] Min. PdNi Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
PD
(RIA E1 & C1
apply)
0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated
1.02 μm [40 μ”] Min. PdNi Contact Area
0.10 μm [4 μ”] Min. Pd Contact Area
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
1.27 μm [50 μ”] Min. Au Contact Area, Lubricated
5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 μm [50 μ”] Min. Ni all over
TS-1126-C
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Power Header
2 mm 4/5-Row, Vertical, Press-Fit Tail
MP2 Series
16.00 MIN.
.630
2.00
.079
5X
A1
10.00
.394
2.00
.079
"D" PLATED THRU HOLE
Ø 0.10
3X
6.00
.236
Recommended 4 Row Press-Fit
PCB Hole Mounting Pattern
Table 5 -- HOLE PLATING SPECIFICATION
HOLE
Finished Dia.
mm [in]
Cu Thickness
SnPb Thickness
microns [µ”]
Drilled Hole Dia.
mm [in]
“D”
0.65-0.80 [.0256-.0315]
0.025 [.001] min
15 [600] max
0.81-0.86 [.0319-.0339]
18.00 MIN.
.709
8.00
.315
2.00
.079
5X
A1
10.00
.394
2.00
.079
4X
"D" PLATED THRU HOLE
Ø 0.10
Recommended 5 Row Press-Fit
PCB Hole Mounting Pattern
TS-1126-C
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects
Please recycle. Printed in USA.
© 3M 2008. All rights reserved.
RIA-2217B-E
3M is a trademark of 3M Company.
MP2-HP10-51P1-TR40B 价格&库存
很抱歉,暂时无法提供与“MP2-HP10-51P1-TR40B”相匹配的价格&库存,您可以联系我们找货
免费人工找货