MP2-HP10-51P2-KR

3M™ MetPak™ 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series • 6.50 Amps per contact • Early mate late break (EMLB) for hot swap or selective loading options • End-to-end stackable • Optional feed-through tail (Press-Fit) • Futurebus+® compatible • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3M.com/ interconnects for compliance information (RIA E1 & C1 apply) Date Modified: August 21, 2009  TS-1126-C Sheet 1 of 4 Physical Insulation: Material: High Temperature LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 μ” [1.27 μm] Nickel Wiping Area: See Ordering Information Tails: See Ordering Information Electrical Current Rating: Power: 6.50 A per power socket contact at 70°C Insulation Resistance: 103 MΩ Withstanding Voltage: 1,500 VAC for 60 seconds Environmental Temperature Rating: -55° C to 125° C UL File No.: E68080 MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ MetPak™ 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series POSITION 2 6.00 .236 11.95 .470 POSITION 1 15.80 .622 11.50 .453 1.40 .055 2.00 .079 3X 17.00 .669 FOR SPECIAL MONOBLOCKS AND PIN ARRANGEMENTS CONTACT 3M SALES REPRESENTATIVE 3.50 .138 12.00 .472 4 ROW PRODUCT mm (Inch) Tolerance Unless Noted ONLY PRESENT ON SOLDER TAIL PRODUCT mm 0 ±3 0.0 ±0.3 0.00 ±0.13 ( ) Dimensions used for Reference Only 17.80 .701 13.52 .532 "B" MATING LENGTH "A" TAIL LENGTH E D C B A ROW Press-Fit Product 5 Row Product Note: 1. Refer to IEC 61076-4-104 Futurebus+® global standard. 2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a “back plane.” Ordering Information MP2-HPXX-XXPX- XXXXX Power Header Plating Options: (See Table 4) Contact Count (See Table 1) Rows 4 = 4 Rows 5 = 5 Rows Tail Length (See Table 3) Loading Pattern (See Table 2) Termination Style P = Press-Fit TS-1126-C Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ MetPak™ 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series Table 1 Contact Count No of Rows 08 4 10 5 Table 2 - Mate Length Loading Pattern Code Description Mate length Row A Mate length Row B Mate length Row C Mate length Row D Mate length Row E (5-Row Prod. Only) 1 All Positions Filled 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 2 All Positions Filled 8.00 [0.315] 8.00 [0.315] 7.25 [0.285] 6.50 [0.256] 6.50 [0.256] 3 All Positions Filled 6.50 [0.256] 8.00 [0.315] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 4 All Positions Filled 6.50 [0.256] 7.25 [0.285] 7.25 [0.285] 8.00 [0.315] 8.00 [0.315] 5 All Positions Filled 7.25 [0.285] 8.00 [0.315] 7.25 [0.285] 6.50 [0.256] 6.50 [0.256] 6 All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 7 All Positions Filled 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] 8 All Positions Filled 8.00 [0.315] 6.50 [0.256] 8.00 [0.315] 7.25 [0.285] 7.25 [0.285] 9 All Positions Filled 8.00 [0.315] 7.25 [0.285] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] A All Positions Filled 8.00 [0.315] 8.00 [0.315] 7.25 [0.285] 7.25 [0.285] 7.25 [0.285] C All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 6.50 [0.256] 6.50 [0.256] D All Positions Filled 8.00 [0.315] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] 6.50 [0.256] G All Positions Filled 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 8.00 [0.315] 5.75 [0.226] H All Positions Filled 8.00 [0.315] 8.00 [0.315] 7.25 [0.285] 8.00 [0.315] 8.00 [0.315] Table 3 Press-Fit Tail Termination Option No. Dim. “A” 1 4.60 [0.181] 2 3.86 [0.152] *Compliant-Pin Tail Table 4 - Plating Plating Suffix Plating Composition Plating Suffix Plating Composition TG (RIA E2 & C2 apply) 0.25 μm [10 μ”] Min. Au Contact Area 2.54 μm [100 μ”] Min. SnPb Tail Area 1.27 μm [50 μ”] Min. Ni all over FJ (RIA E1 & C1 apply) 0.25 μm [10 μ”] Min. Au Contact Area 5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over TG30 (RIA E2 & C2 apply) 0.76 μm [30 μ”] Min. Au Contact Area 2.54 μm [100 μ”] Min. SnPb Tail Area 1.27 μm [50 μ”] Min. Ni all over KR (RIA E1 & C1 apply) 0.76 μm [30 μ”] Min. Au Contact Area 5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over TR30 (RIA E2 & C2 apply) 0.08 μm [3 μ”] Min. Au Contact Area 0.67 μm [27 μ”] Min. PdNi Contact Area 2.54 μm [100 μ”] Min. SnPb Tail Area 1.27 μm [50 μ”] Min. Ni all over RF (RIA E1 & C1 apply) TR40B (RIA E2 & C2 apply) 0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated 1.02 μm [40 μ”] Min. PdNi Contact Area 0.10 μm [4 μ”] Min. Pd Contact Area 2.54 μm [100 μ”] Min. SnPb Tail Area 1.27 μm [50 μ”] Min. Ni all over LR (RIA E1 & C1 apply) 0.08 μm [3 μ”] Min. Au Contact Area 0.67 μm [27 μ”] Min. PdNi Contact Area 5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over PD (RIA E1 & C1 apply) 0.13 μm [5 μ”] Min. Hard Au Contact Area, Lubricated 1.02 μm [40 μ”] Min. PdNi Contact Area 0.10 μm [4 μ”] Min. Pd Contact Area 5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over 1.27 μm [50 μ”] Min. Au Contact Area, Lubricated 5.08 μm [200 μ”] Min. Matt Whisker Mitigating Sn Tail Area 1.27 μm [50 μ”] Min. Ni all over TS-1126-C Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ MetPak™ 2-FB Power Header 2 mm 4/5-Row, Vertical, Press-Fit Tail MP2 Series 16.00 MIN. .630 2.00 .079 5X A1 10.00 .394 2.00 .079 "D" PLATED THRU HOLE Ø 0.10 3X 6.00 .236 Recommended 4 Row Press-Fit PCB Hole Mounting Pattern Table 5 -- HOLE PLATING SPECIFICATION HOLE Finished Dia. mm [in] Cu Thickness SnPb Thickness microns [µ”] Drilled Hole Dia. mm [in] “D” 0.65-0.80 [.0256-.0315] 0.025 [.001] min 15 [600] max 0.81-0.86 [.0319-.0339] 18.00 MIN. .709 8.00 .315 2.00 .079 5X A1 10.00 .394 2.00 .079 4X "D" PLATED THRU HOLE Ø 0.10 Recommended 5 Row Press-Fit PCB Hole Mounting Pattern TS-1126-C Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. © 3M 2008. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.