3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers
MP2 Series
•
•
•
•
•
End-to-end stackable
Offset dual-beam contact minimizes insertion force
Molded guide fingers provide integrated alignment
Alignment wafer for true position
Mates with MP2-P inverse headers and elevated
inverse headers, MP2-PXXXE, for extended card
applications
• Protective Push-Cap on Press-Fit Only
• Meets IEC 61076-4-104 Futurebus+® global standard
• See the Regulatory Information Appendix (RIA)
in the “RoHS compliance” section of
www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: September 17, 2013
Physical
TS-1117-C
Sheet 1 of 4
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 µ" [1.27 µm) Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating: Signal: 1.5 A – All contacts simultaneously
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1000 VAC
Environmental
Temperature Rating: -55°C to +125°C
Process Temperature Rating: 260°C (Profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers
MP2 Series
"A"
5.00
.197
TYP.
22.42
.883
ROW
E
D
C
B
A
14.50
.571
POSITION 1 2
33.0
1.30
11.30
.445
13.30
.524
POSITION X
3.75
.148
2.00
.079
4X
13.50
.532
"C" TAIL LENGTH
23.0
.91
PRESS-FIT AND SOLDER TAIL PRODUCT
(CAPPED)
2.00
.079
TYP.
21.95
.864
"B"
0.05 ±.05
.002 ±.002
23.30
.917
MATED WITH MP2-PXXXE-5XXX-XXXX
23.30
1.50
.917
.059
CENTER LINE OF ROW A
mm
[inch]
Tolerance Unless Noted
ASSEMBLED TO PCB AND MATED WITH MP2PXXX-5XXX-XXXX
mm
0
0.0
0.00
±3
±0.3
±0.13
[ ] Dimensions for Reference
Only
Notes:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a
plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
Ordering Information
MP2 - SXXXG - 5XXX - C - XXXXX
S = Socket
Plating Options
(See Table 3)
Contact Count
(See Table 1)
Guide Finger
Rows
5 = 5 Rows
Contact Arrangement
1 = All rows filled*
*Contact 3M Sales Representative for information on special fill patterns and mono blocked pairs
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
Termination Style
M = Solder Tail (Press Peg)
P = Press-Fit (with Tail Cover)
Tail Length
(See Table 2)
C = Capped Solder Tail
Blank = Press-Fit
TS-1117-C
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers
MP2 Series
Table 1 - Connector & Row Lengths
Pin Count
Dim. “A”
mm [inch]
Dim “B”
mm [inch]
Rows
Block
Count
030
11.95 [0.471]
10.00 [0.394]
5
1
060
23.95 [0.943]
22.00 [0.866]
5
2
090
35.95 [1.415]
34.00 [1.339]
5
3
120
47.95 [1.888]
46.00 [1.811]
5
4
150
59.95 [2.361]
58.00 [2.283]
5
5
180
71.95 [2.833]
70.00 [2.756]
5
6
210
83.95 [3.305]
82.00 [3.228]
5
7
240
95.95 [3.778]
94.00 [3.701]
5
8
Table 2 - Tail Length
Contact-to-PC Board Tail
Termination Option No.
Solder
Dim. “C”
Press-Fit*
1
4.35 [0.171]
1
3.53 [0.139]
*Compliant-Pin Tail
Table 3 - Plating & Regulatory
Plating Suffix
Press-Fit Tails*
Solder Tails
Plating Composition
KR
RIA E1 & C1 apply
RIA E1 & C1 apply
0.76 µm [30 µ"] Min. Au Contact Area
2.54 µm [100 µ"] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ"] Min. Ni all over
LR
RIA E1 & C1 apply
RIA E1 & C1 apply
0.08 µm [3 µ"] Min. Au Contact Area
0.67 µm [27 µ"] Min. PdNi Contact Area
2.54 µm [100 µ"] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ"] Min. Ni all over
*Compliant-Pin Tail
TS-1117-C
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers
MP2 Series
8.00
.315
4.00
.157
2.00
.079
4X
1.00
.039
THESE HOLES CONSTITUTE MODULAR
REPEATING PATTERN
2.00
.079
TYP.
4.00
.157
"B"
2.05 +.05
-.00
Ø 0.10
.081 +.002
-.000
UNPLATED
THRU
HOLE
UNPLATED
THROUGH-HOLE
Ø
A1
“D” PLATED
"D"THROUGH-HOLE
PLATED THRU HOLE
Ø
1.50 +.10
-.00
Ø 0.10
.059 +.004
-.000
UNPLATED
THRU
HOLE
UNPLATED
THROUGH-HOLE
Ø
0.10
3.00
.118
RECOMMENDED PCB HOLE
MOUNTING PATTERN
Table 4 - HOLE PLATING FINISHES
HOLE
Finished Dia.
MM [in]
Cu Thickness [mm
[in]
Immersion Matte
Sn Thickness
microns [µ”]
Electrolytic Au
Thickness
microns [µ"]
OSP ENTEK
Thickness
microns [µ”]
Drilled Hole
Dia. mm [in]
“D”
0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330.0340] or 0.85 mm
[#66] TWIST DRILL
TS-1117-C
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect
unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will
not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
RIA-2217B-E
很抱歉,暂时无法提供与“MP2-S180G-51P1-LR”相匹配的价格&库存,您可以联系我们找货
免费人工找货