N7G24-A0D2RA-00-7WF

3M™ Connector for CFast™ Card ™ 7G24 Series • Headers mate with both CFast Type I and Type II cards • Extended guide rails enable accurate and easy card insertion • Single row surface mount solder tails facilitate auto placement and IR soldering • Optional 2 mm board standoff enables board population • Meets CFA standards for known compatibility and reliability • Optional ejector and card retainer can be purchased pre-assembled or separately • Integral side solder tab with card grounding feature and also prevent the card from ‘flying’ out of header during ejection • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified: May 12, 2010 TS-2329-A Sheet 1 of 4 Physical Material: High Temperature Thermoplastic Flammability: UL 94V-0 Color: Beige Insulation: Contact: Terminal Plating: Material: Copper Alloy Underplating: 80 µ" [2.03 µm] Min. Nickel Wiping Area: 15 µ” or 30 µ” [0.38 – 0.76 µm] Min. Gold Solder Tail: 100 µ” [2.54 µm] Min. Matte Tin Electrical Insulation Resistance: 103 MΩ at 500 VAC Withstanding Voltage: 500 VAC for 1 minute Current Rating: 1.5 A per pin Environmental Temperature Rating: -40°C to 85°C Process Temperature Rating: Max. 260°C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Connector for CFast™ Card 40.16±0.1 [1.581±0.004] 7G24 Series () 7.62 [.300] 1.27 [.050](22X)PITCH 0.45±0.05 [.018±0.002] B S1 () () 39.23 [1.545] 26.23 [1.033] () () 20.32 [.800] 4.595 [.181] PC17 4.595 [.181] PC1 S7 25.38±0.1 [.999±0.004] () () () 20.32 [.800] 7.62 [.300] 33.66±0.08 [1.325±0.003] C 1.27 [.050](22X)PITCH 0.40±0.05 [.016±0.002] C0.6(2X) ( ( 47.80 [1.882] 48.50 [1.910] ) ) 43.03±0.08 [1.694±0.003] 1.300 [.051] A A C OF C L 40.16±0.1 [1.581±0.004] 45.40±0.1 [1.788±0.004] () () 25.10±0.1 [.988±0.004] 1.40 [.055] 1.650 [.065] 1.0 [.039] 0.900 [.035] 1.250 [.049] mm [inch] Part No. N7G24-A0B2XX-00-XHT N7G24-A0B2XX-10-XHT Dimension ‘A’ mm [inch] 5.70 [.224] 7.70 [.303] Tolerance Unless Noted .0 mm inch ±.25 ±.010 .00 ±.15 ±.006 .000 ±.05 ±.002 [ ] Dimensions for Reference Only TS-2329-A Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Connector for CFast™ Card 49.80 [1.961] MIN 7G24 Series ( 40.16 [1.581] ) 24.80 [.976] TYP 41.05 [1.616] MIN C OF D L 18.32 [.721] MAX (2X) 51.60 [2.032] MIN 18.15 [.715] MIN (2X) COMPONENT REFLOW KEEP OUT ZONE (FOR NO STANDOFF HEIGHT CONNECTOR) 49.80 [1.961] MIN ( 18.32 [.721] MAX (2X) 40.16 [1.581] ) 6.50 [.256] MIN (2X) 6.92 [.272] MIN (2X) 11.50 [.453] MIN (2X) C OF D L 32.80 [1.291] MAX ( 24.80 [.976] TYP ) 14.75 [.581] MIN (2X) 39.23 [1.545] MAX 51.60 [2.032] MIN COMPONENT REFLOW KEEP OUT ZONE (FOR 2MM STANDOFF CONNECTOR) TS-2329-A Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Connector for CFast™ Card 7G24 Series 40.16 [1.581] 6.80 [.268] 3.00 [.118] 8.105 [.319] 20.32 [.800] 4.595 [.181] 7.62 [.300] 1.27 [.050](22X) 0.80±0.05 [.031±0.002] 0.08 L D Ø2.30 [Ø.091](2X) Ø1.75 [Ø.069](2X) 3.00 [.118](2X) 4.00 [.157](2X) PC17 25.10 24.80 [.988] [.976] 2.50 [.098] PC1 S7 C OF D L S1 Ø1.35 [Ø.053](2X) 45.40 [1.788] 46.60 [1.835] RECOMMENDED PCB THICKNESS 1.65 [0.066] NOMINAL HOLE & PAD PATTERN TOL ±0.05 [0.002] Ordering Information Physical Configuration (Total Arm Length) A = 39.23 mm Card Polarization B = Normal **D = Inverse Mounting Style 2 = Surface Mount, Right Angle 1.27 mm Tail Pitch N7G24 - A 0 X X XX - X 0 - X XX Packaging Option HT = Hard Tray **WF = Tape & Reel Preassembly 0 = No preassembly accessory 3 = Right Dual-Push Ejector (P/N: 7G24-B5A6-05) 5 = Left Dual-Push Ejector (P/N: 7G24-B6A6-05) 7 = Latching Retainer (P/N: 7E50-C016-00) 0 = No Standoff 1 = 2 mm Standoff Plating Suffix **EA=15 µ" min. Gold plated at mated end and Gold Flash at soldertail. 80 µ" min. Nickel underplated all over. **EB=30 µ" min. Gold plated at mated end and Gold Flash a soldertail. 80 µ" min. Nickel underplated all over. RA=15 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail. 80 µ" min. Nickel underplated all over. RB=30 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail. 80 µ" min. Nickel underplated all over. Notes: ** are for future development TS-2329-A Sheet 4 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnector.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnector.com Please recycle. Printed in USA. © 3M 2010. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.